Johannes Mueller
e75db87bf6
Tweaking the a-comp inline display a bit. Make it more skinny.
2017-07-31 21:31:23 +02:00
Johannes Mueller
2716ce41e0
Indicate whether to show plugin's inline display in GUI
...
This is currently done by an extension data similarly to
LV2_INLINEDISPLAY__interface.
2017-07-31 21:31:23 +02:00
Johannes Mueller
59775df9be
Simplified inline display if the channel strip is not wide enough
...
If the width of the display area is below 200 px, we switch from the graph
display to displaying only two bars, one for output level and one for gain
reduction. In the bar mode we also visualize threshold and ratio.
2017-07-31 21:31:22 +02:00
Johannes Mueller
24cbb1b153
Honor attack and release parameters in a-comp's inline graph
2017-07-31 21:31:22 +02:00
Johannes Mueller
ccab32654b
Indicate gain reduction in a-comp
2017-07-31 21:31:22 +02:00
e65ff3fb4a
Show range -60 .. +10 dBFS in acomp's inline display
2017-07-31 21:31:22 +02:00
Johannes Mueller
85106d81a0
Set makeup to 0.f when bypassed also in stereo version
2017-07-31 21:31:22 +02:00
Johannes Mueller
29df879edd
Adjust the indication of the treshold value by the makup gain.
...
When lifting the compressor curve by the makeup gain value the actual
treshold (the level when the curve kinks in) is also lifted. Therefore we need
to adjust the dashed line indicating the threshold as well as the level when
the color gradient to show compression kicks in.
2017-07-31 21:31:22 +02:00
Johannes Mueller
dff4153024
Also the stereo version needs to set need_expose
2017-07-31 21:31:22 +02:00
Johannes Mueller
f68754b19d
Show a-comp's makeup grain in inline rendering
2017-07-31 21:31:22 +02:00
b42dbe9e4e
Sanitize printing of a-eq gain parameters
2017-07-22 17:41:35 +02:00
Johannes Mueller
0109042e7b
Increase range of a-comp#stereo release time
...
Like for the mono version in f52443e17e
2017-07-21 16:11:17 +02:00
Jelle van der Waa
b1cf27bed4
Fix duplicate ‘const’ declaration specifier
2017-07-12 12:09:59 +02:00
d08b81d33d
a-EQ: Revert one of the previous changes
...
One of the previous changes was not a typo, revert it.
2017-06-09 23:09:36 +10:00
ca815acd61
a-EQ: DSP bugfix
...
Previously there were large spurious spikes in the signal when
the bandwidth parameter was adjusted on a pure sine tone
for the peaking circuits. This has been *greatly* reduced if not
eliminated by fixing a typo in two of the equations.
2017-06-08 02:04:12 +10:00
Nil Geisweiller
a07ca8fa3e
Fix a-EQ when parameter changes are very slow
...
If the parameters change too slowly the filter may never get updated. Indeed,
in spite of v_f0, v_g or v_bw being updated, set_params may never be called,
thus v_filter never updated.
2017-06-06 14:44:19 +02:00
0b6e2d1e46
Improve a-delay to follow tempo-ramps & BPM changes
...
This is a bit of a hotfix, not a proper solution
2017-03-11 23:10:44 +01:00
8f2a5c01dd
fix a-reverb, cut tail on deactivate, plug memory-leak
2017-03-08 23:04:16 +01:00
2a7ad06e79
fix a-fluidsynth bank select (use MMA style, 14 bit MSB/LSB)
2017-01-31 10:44:07 +01:00
9a13a563d0
fix a-fluidsynth midnam bank select
2017-01-31 00:43:43 +01:00
9a46d593cb
a-fluidsynth process events even when no sf2 is loaded.
...
Keep track of program-changes, re-apply Bank/PGM once the
soundfont is loaded. fluidsynth itself keeps track of CCs.
2016-12-07 19:48:52 +01:00
2d37392f1a
a-fluid synth: label Reverb & Chorus sends.
...
Also globally enable Reverb + Chorus FX (so that sends work by default)
2016-12-06 22:56:04 +01:00
f26ed23fd9
a-fluid synth: list all bank/programs
2016-12-06 17:00:12 +01:00
9c20892c27
Turn a-fluidsynth into C++
2016-12-06 17:00:12 +01:00
8d8132aa3c
rough-in a-fluid synth midnam support
2016-12-06 17:00:12 +01:00
5f1d94a7b2
Protect a-comp's display/state against NaN/Inf.
2016-11-29 09:04:13 +01:00
0fe62a34da
protect a-delay again Inf, NaN, HUGE and stuff.
2016-11-29 08:41:10 +01:00
7b687d08a1
properly handle FS pitch-bend - closes #7140
2016-11-28 12:53:20 +01:00
c5d4900ea4
a-fluidsynth: fix off-by one. Assign all MIDI channels if possible
2016-10-29 19:57:43 +02:00
f52443e17e
Increase range of a-comp release time.
...
This facilitates ducking music for voice-overs w/o hold-time.
2016-10-15 21:27:29 +02:00
f6570bb507
Revert "add debug info to a-fluidsynth"
...
This reverts commit 6821f54817
2016-10-05 16:07:10 +02:00
6821f54817
add debug info to a-fluidsynth
2016-10-05 15:01:12 +02:00
7e09dc1aa6
fix LV2 State Flags for Atom:Path
...
state-restore does not set the same flag, so lilv_state_equals()
returns false even for identical states and a new state is saved regardless
actual fix also depends on http://dev.drobilla.net/ticket/1145
2016-09-21 03:34:43 +02:00
aca6e667a8
update a-plugins to use official lv2plug.in URI
2016-09-18 19:07:49 +02:00
0ff233d234
Update our MSVC project files to generate the most recent Ardour session file format (ver 5) rather than the older v3 format
2016-08-30 07:15:00 +01:00
ffb3e9bb21
fix lv2 ttl
2016-08-28 13:18:48 +02:00
c6ef3a75d3
backwards compatible a-comp stereo sidechain ports
2016-08-27 18:08:46 +02:00
f814e68e30
Prepare a-comp for click-free bypass/enable
2016-08-27 17:14:49 +02:00
d6952445ce
click-free a-delay bypass/enable
2016-08-27 16:59:15 +02:00
0fa1123f82
NO-OP clean up plugin ttl
2016-08-27 16:01:16 +02:00
62de4d0c31
add NaN/Inf protection now that bypass no longer de/activates
2016-08-27 14:10:51 +02:00
36776bafcd
click-free a-reverb bypass
2016-08-27 14:09:47 +02:00
935fd3b32f
Add automatable click-free bypass/enable feature to a-eq
2016-08-27 13:23:25 +02:00
aee5d24cfa
a reverb is a reverb is a reverb
2016-08-24 23:45:02 +02:00
427d9f888a
reduce initial fluidsynth load
2016-08-24 17:51:15 +02:00
953b8ac99f
prevent a unlikely race: concurrent restore() + work_response ()
2016-08-24 15:38:36 +02:00
f5602adfe8
tweak a-fluidsynth reinit strategy.
...
reset synth in offline thread, queue panic on deactivate to be
called in run() after first re-activate.
Initial activation does not warrant a panic.
2016-08-24 13:05:47 +02:00
aa349d3f8c
add support for reverb & chorus in a-fluidsynth
2016-08-24 05:33:18 +02:00
870cb19737
a-fluidsynth
2016-08-24 03:18:14 +02:00
6bf40e3a44
a-Reverb: Fixed bug with the reverb all pass filters causing bad sound
2016-08-18 00:41:43 +10:00
613ae0c110
Nobody expects the LV2 inquisition!
2016-08-13 14:51:57 +02:00
2b7a89ecff
prefix blessed scripted DSP plugins with a-*
2016-08-10 03:11:49 +02:00
dd88461942
clean up plugin ttls - always add semicolon for compatibility
2016-08-09 22:00:38 +02:00
8419c7b79c
initialize uninitialized variable
2016-07-28 13:28:38 +02:00
b648ad9cc7
a-Delay: Smooth transition on LPF changes and set max feedback 100
2016-07-20 21:17:51 +10:00
62cd4d43bf
a-Comp: Fix bug with DSP in the knee processing region
2016-07-20 20:10:46 +10:00
f8207524e9
a-Delay: Add feedback control 0 to 90 percent
2016-07-19 14:43:43 +10:00
f71fdd4143
clean up a-comp, remove old prototype UI
2016-07-14 21:41:16 +02:00
2b262dbfdd
fix a-eq interpolation
2016-07-14 20:44:47 +02:00
1d78150d45
refine a-eq inline display size + grid
2016-07-14 19:44:03 +02:00
fdfff81850
a-EQ: Remove LPF/HPF completely from this plugin
2016-07-15 01:54:50 +10:00
b64fab95e0
a-EQ, a-Reverb: Tweaks to parameter smoothing
2016-07-14 16:41:26 +10:00
7a1084d349
a-EQ: Tweak bandwidth range on parametric eq and use log controls
2016-07-14 05:44:14 +10:00
08f9fc40dc
a-EQ: Fixed transfer functions, now boost/cut cancel out correctly
2016-07-14 03:06:47 +10:00
0fdbbac99d
a-EQ: Tidy transfer function calculation
2016-07-14 02:03:08 +10:00
0b3d09b011
a-Reverb: Interpolate parameters, stable version
2016-07-13 23:58:07 +10:00
7dc6c0fc08
a-Reverb: Revert some of previous changes, sound of reverb much improved
2016-07-13 19:30:03 +10:00
5965fedc51
a-Reverb: Using new algorithm based on FreeVerb
2016-07-13 18:08:28 +10:00
a66ad18402
initialize some uninitialized variables
2016-07-13 04:31:34 +02:00
625c589d80
a-Reverb: fix typo in plugin name
2016-07-13 01:27:23 +10:00
49fbb6fa15
a-Reverb: Fix ttl and tweak maximum input gain
2016-07-13 01:16:08 +10:00
af69fd6850
a-EQ: Transfer function curves improvement
2016-07-13 00:55:38 +10:00
c612cea5ea
fix a-eq library extension
2016-07-12 16:43:10 +02:00
43f8d2503c
a-reverb prototype (based on setBfree b_reverb)
2016-07-12 16:43:10 +02:00
d9f19ad1fe
fix a a-eq ttl typo
2016-07-12 14:38:28 +02:00
1f02dd2a85
fix compilation with lv2 < 1.10 (lv2 extended)
2016-07-12 13:44:55 +02:00
157564947b
a-eq tweaks:
...
* shorten e-eq Hz display (no decimals)
* use 16:9 aspect inline display
* fix a compiler warning
2016-07-12 04:01:56 +02:00
1f7f7f8597
remove implicit labels from a-eq
2016-07-11 16:58:53 +02:00
b7a7c1bbd8
a-EQ: Tweak default values and inline display scale +-20dB
2016-07-09 00:29:59 +10:00
44de8560a6
Add a-EQ (basic 4 band EQ) with inline display based on SVF filters
2016-07-07 22:15:44 +10:00
f2f7414751
a-delay: Fix compiler warning
2016-07-06 02:18:10 +10:00
de4cb2f8af
Add a-Delay plugin
2016-07-06 01:53:59 +10:00
83e1d9fff3
tweak a-series plugin names
2016-07-05 17:17:59 +02:00
5966612a4f
consistent use of fmaxf() in a-comp
2016-07-05 15:38:24 +02:00
a16c0c445a
a-comp: Use input signal x as cutoff for inline comp curve
2016-07-05 18:36:04 +10:00
2a7bd996cd
a-comp: Fix inline comp curve shading
2016-07-05 18:19:00 +10:00
bf7c4c7d60
a-comp: Fix peak level on both stereo and mono plugins
2016-07-05 15:07:06 +10:00
8507d2c9dd
add required check for cairo in a-comp
2016-07-04 15:10:35 -04:00
2f7c167fc9
a-comp: Make ratio control logarithmic
2016-07-05 02:32:05 +10:00
46bfe2b51a
a-comp: Add stereo version
2016-07-05 02:15:47 +10:00
a1a6dd3865
a-comp display is getting fancy :)
2016-07-04 15:50:05 +02:00
d2f20120b7
display level in a-comp display
2016-07-04 14:26:37 +02:00
49294644fb
con't work on a-comp inline-display
2016-07-04 14:07:05 +02:00
ebdb8dc2ce
add C99 flags for lv2 plugin
2016-07-04 13:08:23 +02:00
d9ba78d594
basic inline display for a-comp
2016-07-04 12:59:04 +02:00
da5ab866c2
a-comp: Tweak control bounds and clear state on deactivate
2016-07-04 19:43:06 +10:00
9220e81e20
clean up a-comp .ttl -- maintainer: the a-team
2016-07-03 14:45:15 +02:00
94e5060168
bundle a-comp
2016-07-03 03:21:44 +02:00
741428b6fd
add a debug mode (in synth) to track down lost note-on
2016-06-26 17:15:46 +02:00
b0200b23f2
Accommodate the fact that 'msvc_resources.rc.in' got moved to a new path
2016-05-21 10:33:18 +01:00
40aa4cfe06
Modify our MSVC projects to build liblua as a DLL rather than a static lib
2016-04-04 16:40:20 +01:00
97c9722236
silence clang int/float/double -Wabsolute-value
2015-06-23 15:46:00 +02:00
801af5df9e
Add the new (UINTSDEFINED) preprocessor directive to all out MSVC projects (just to be on the safe side)
2015-06-09 13:18:42 +01:00
7a1baeee79
promote sustain pedal from meh to reasonable.
2015-02-28 15:52:28 +01:00
3a63b785a9
rsynth: map note-on with zero velocity to note-off
2015-02-19 00:54:30 +01:00
304b05ffd9
clarify reasonable synth description.
2015-01-20 21:25:59 +01:00
95091a52a0
When building with MSVC make sure any backends / panners etc get copied to the correct target folder
...
(i.e. 'lib/ardour3' or 'lib/mixbus3' as appropriate)
These changes are MSVC specific and shouldn't affect the other builds
2015-01-12 14:43:22 +00:00
4e2673ca2c
add explicit chmod for good measure
2014-12-28 10:20:46 +01:00
9cf5b23392
Modifications needed to build ReasonableSynth with MSVC
2014-11-09 08:11:46 +00:00
730e09ce65
another round of compiler warning fixes
2014-10-23 05:31:40 +02:00
36135baaac
change reasonable-synth to be sample accurate (note on/off)
...
at expense of slightly increased CPU load.
2014-07-06 13:24:53 +02:00
912f07b919
mingw build fixes (tested with i686-w64-mingw32 on linux-x86_64)
2014-03-04 15:25:58 +01:00
7000afdc66
fix merge conflict with master
2014-01-23 13:41:20 -05:00
fb8af16778
attenuate master volume
2014-01-22 18:10:44 +01:00
114997b7e6
tweak reasonable synth:
...
* prevent denormals / cut low volume
* reduce default amplitude of fundamental
2014-01-22 15:30:38 +01:00
7418c12a5b
override -fvisibility=hidden for the LV2plugin descriptor
2014-01-17 16:10:03 +01:00
8f69af4af3
add support for old compilers w/o implicit stdbool
2013-12-27 14:53:30 +01:00
e82ccd7648
rsynth.lv2: fix note off+on follow up:
...
special case if the same note is turned off and on in the
same [internal] synth cycle (64samples). x-fade to ADSR attack.
2013-12-14 04:29:12 +01:00
6c84362959
fix reasonable synth octave
2013-12-13 20:59:08 +01:00
c43a1f39a6
xmas-egg
2013-12-13 20:28:30 +01:00
17dc72d08e
silence warning for ancient libc users&devs :)
...
string.h 'index' is a global declaration
marked legacy in 2001 and removed in posix.1-2008
2013-10-27 17:03:49 +01:00
2cad99bf39
add notes about inlined lv2 atom/util.h functions
2013-10-27 09:56:07 +01:00
be6d6231fb
expand tabs in reaonablesynth code
2013-10-27 09:52:46 +01:00
caa7c3b579
mark some unused variables -- fewer compiler warnings
2013-10-27 09:51:08 +01:00
dcd6103231
make reasonable synth a bit more piano-like.
...
(overtone + decay time)
2013-10-26 17:33:07 +02:00
e451411719
remove c99'ness from rsynth.c - should fix #5751
2013-10-26 16:42:27 +02:00
75271a17d8
relax requirement on lv2 stack
2013-10-23 13:45:28 +02:00
78e3864c5d
add missing waflib include to rsynth.lv2
2013-10-20 17:29:03 +02:00
9faae9c8a3
bundled LV2 plugin build and deployment
2013-10-20 17:24:59 +02:00
d6e2e34025
fix typo (rsynth.lv2 configure)
2013-10-20 15:28:13 +02:00
f5c386bbb4
add reasonablesynth.lv2
...
A reasonably simple synth to allow new users to 'hear midi'.
This is a first step. It still needs proper install and bundling.
2013-10-20 04:31:07 +02:00
