73d901d889
Add track select buttons to Launchkey map.
2016-01-30 11:18:56 -06:00
9115a2c5d2
Surfaces with separate meters should meter even when stopped.
2016-01-30 09:46:37 -06:00
f762cbff35
mackie: remove mention of "blinkers" concept
2016-01-29 18:40:56 -05:00
d5a8825ce8
mackie: basically (fully?) operation fader automatio control for first selected route
2016-01-29 18:37:03 -05:00
da35f58218
mackie: initial attempt at making automation-related buttons set fader automation state for selected routes
2016-01-29 16:29:52 -05:00
22a14a56f3
use new selection API to avoid double signal when a track or tracks are SET as the selection
2016-01-29 16:15:41 -05:00
fbe236999d
modify Selection API to provide (default-valued) "with_signal" argument to all ::clear_*() methods
...
This allows the clear methods to be used before calling ::add(), to avoid the
emission of a signal saying "there are no <foo> selected right now".
There should be no side-effects from this commit.
Note that correct use of this new API is complex, and requires avoiding the use
of wrapper methods like clear_objects().
2016-01-29 16:15:41 -05:00
9fe4b7a92a
mackie: if a subview mode is not OK because there's no selection, show no message
2016-01-29 16:15:41 -05:00
4a6724868d
NOOP: change brace placement to avoid confusing emacs
2016-01-29 16:15:41 -05:00
42fbb96674
mackie: make group button (appear) to do something
2016-01-29 16:15:41 -05:00
9088944db2
Mackie protocol: More LED indicator fixes.
2016-01-29 14:26:08 -06:00
17301b87f9
mixbus: don't assert(ch_post()) in case we use various methods on "odd" Routes in the future
2016-01-29 13:02:00 -05:00
39a61dba83
mixbus: vpot press in non-subview mode should toggle master bus send
2016-01-29 12:58:50 -05:00
fd291d1fa5
add new Route API ::master_send_enable_controllable() to provide generic access to a mixbus-centric control
2016-01-29 12:58:15 -05:00
c6ea3515d1
mackie: in Sends subview mode, the enable control for the send should be looked upin the subview route, not the strip's own route
2016-01-29 12:41:50 -05:00
4b70a0aa0d
Button::AudioInstruments should not be lit without good reason.
2016-01-29 11:28:15 -06:00
0a2377e9b4
mackie: redesign display logic entirely
...
Strips now maintain a pair of pending display strings (upper and lower).
A periodic timeout writes the pending value to the actual hardware if it
differs from the current string. This new design makes it easy to put a
message on the display and then after some period of time, revert to
whatever was there before.
2016-01-29 12:27:46 -05:00
1972cf966e
Another attempt fixing crash at exit on windows.
2016-01-29 18:22:57 +01:00
b40717604c
Mackie Protocol: HasSeparateMeters flag for X-Touch devices
2016-01-29 10:31:47 -06:00
c064135436
Added Behringer X-Touch device files.
2016-01-29 10:10:17 -06:00
8aaa027ed3
mackie: fix Global View button function
...
Bug introduced changing logic for set_view_mode()
2016-01-28 23:20:03 -05:00
d0668e5511
mackie: don't overload "Audio Instruments" and "Instruments" buttons.
...
With the MCU Pro, the button labelled "Instruments" uses the Dyn button ID.
The one labelled "Audio Instruments" does not.
This may break Nucleus support - needs to be checked
2016-01-28 23:05:28 -05:00
e862be7300
mackie: use Route::send_name() rather than Route::nth_send()
2016-01-28 23:05:28 -05:00
f1ed01b97f
mackie: fix display of send level value
2016-01-28 23:05:28 -05:00
4a5b81a838
add new API to Route to get name of "well-known" nth-send
...
Route::nth_send() has the wrong semantics in Mixbus for this purpose. Probably
need to revisit this at some point
2016-01-28 23:05:28 -05:00
c0a843a905
fix device-list update concurrency issue.
...
It may happen that during push_state_to_backend() a device is
reconfigured in a way that triggers a "Device Changed" callback before
the engine is started. This callback can trigger a change to the
configuration that will be used when the engine is actually started.
This has been seen on OSX in conjunction with Aggregate Devices
(even if the aggregate is not used, but the device which is used
is also part of an aggregate)
example: HW changed callback arrives, device-list is re-populated,
*A*irplay" is at the top of the list, Airplay supports only 44.1K,
Samplerate changes... later save also writes this new rate to the file.
2016-01-29 01:12:53 +01:00
cf558ee18c
Buses and Auxes are slightly different view-filters in Mixbus
2016-01-28 17:21:42 -06:00
54c3c9e494
prevent bank/channel switching past the end of the available routes; do nothing when a view mode finds no matching routes
2016-01-28 16:27:33 -05:00
ea895efb97
mackie: improvements to display when switching subview modes
2016-01-28 15:08:26 -05:00
d19b1b64b1
make Send button light appropriately
2016-01-28 15:08:25 -05:00
3332633d19
Editing from a control surface must have the ability to ignore mouse location.
...
Add mark_in and mark_out actions that explicitly use the playhead as the edit location.
2016-01-28 13:46:33 -06:00
458a2b723c
Use visible playhead location for editing during a jog-wheel event.
2016-01-28 13:46:33 -06:00
893b51bda2
Center the playhead for stationary_playhead playback.
...
This avoids a visual discontinuity when playback is initiated after a jog-event.
2016-01-28 13:46:33 -06:00
aedde11862
Initialize Editor::clicked_selection to prevent programming error dialog/exit
...
This was triggered when reloading session and immediately duplicating range with
keyboard shortcut. As clicked_selection was uninitialized it would try to use
an invalid index into the TimeSelection.
2016-01-28 13:42:37 +10:00
45e8bda65f
Change duplicate range to use time range/s rather than a single region
...
This should fix bugs #4980 , #4984 , #4986 and #6579
2016-01-28 12:25:16 +10:00
e6a33b818f
Add Playlist::duplicate_range/s utility methods
2016-01-28 12:25:16 +10:00
420206705d
mackie: fix subview mode logic
2016-01-27 19:05:47 -05:00
e63c805fe2
mackie: clean up (some) interactions between subview mode and selection
...
Also, stop Plugin button from doing anything, since it has nothing to do yet
2016-01-27 19:00:27 -05:00
d121e6bf15
Fix AU port-name encoding.
...
This allows us to revert ec8cf4e4
2016-01-28 00:00:47 +01:00
ec8cf4e4f5
Fix µ-iness.
2016-01-27 23:39:35 +01:00
b985f87a77
Use proper UTF8 file-names during export.
2016-01-27 22:58:59 +01:00
c61e5dbc18
remove debug output
2016-01-27 16:26:50 -05:00
7513176501
monitor send does not count in Route::nth_send()
2016-01-27 16:26:41 -05:00
66686a4e2a
mackie: semi-working Sends subview mode
2016-01-27 14:15:41 -05:00
8e585338e0
no need for multiple send level/enable parameter types
2016-01-27 14:15:34 -05:00
9b2af90328
remove mackie send pot mode (subview mode for sends coming up)
2016-01-27 12:41:01 -05:00
c9e85c91fe
return relevant AutomationControl for send_level_controllable() in Ardour
2016-01-27 11:38:14 -05:00
708d80029b
make Route::nth_send() and Route::nth_processor() be const
2016-01-27 11:37:54 -05:00
c79243c805
add stubs and enums to access "well-known" send controls
2016-01-27 11:16:22 -05:00
c01a4961b4
add Novation_LaunchKey25.map
2016-01-26 16:48:00 -06:00
