30b087ab3d
globally change all use of "frame" to refer to audio into "sample".
...
Generated by tools/f2s. Some hand-editing will be required in a few places to fix up comments related to timecode
and video in order to keep the legible
2017-09-18 12:39:17 -04:00
2d60a69c2d
Consolidate ctrl surface code
2017-08-05 01:28:11 +02:00
b5e0b5b09f
PortManager::unregister_port() must be called with process lock
...
This fixes "Failed to register <surface> port" when re-loading a session.
2017-07-28 20:15:15 +02:00
fde0e293a3
Remove unused "mark" parameter from stop_touch() API
2017-07-24 01:59:18 +02:00
55df5b39bc
Prepare removal of redundant get_user/set_user API.
2017-06-21 18:13:41 +02:00
eb3f50e15c
change the way ControlProtocols (control surfaces) are notified and handle Stripable selection changes
...
The Editor continues to notify them, but via a direct call to ControlProtocolManager, not a signal.
The CP Manager calls the ControlProtocol static method to set up static data structures holding
selection info for all surfaces and then notifies each surface/protocol that selection has changed.
2017-05-12 14:51:39 +01:00
f28bfb2648
Use XMLNode::get/set_property API in FaderPort class
2017-04-19 09:36:54 +10:00
f1e6cc50b0
Revert "libs: debug output for faderport/editor mixer strip sync"
...
This reverts commit 6fb91b1ac2
2017-02-25 19:56:51 +01:00
6fb91b1ac2
libs: debug output for faderport/editor mixer strip sync
2017-02-24 23:10:03 +01:00
2b9525c991
try to make sure faderport shows the same strip as the editor mixer strip
2017-02-24 22:54:25 +01:00
ecc2348ecc
should not really bind a shared_ptr<Port> to a sigc slot, so don't do that
2016-12-18 00:07:59 +00:00
8a26f02851
amend FaderPort code to use BasicUI::goto_start() with optional argument
2016-09-27 14:59:29 -05:00
cf52d6e4b4
enough with umpteen "i18n.h" files. Consolidate on pbd/i18n.h
2016-07-14 14:45:23 -04:00
f03f2e5c3f
use new record safe control in surface support
2016-05-31 15:30:45 -04:00
cefd3ac8be
convert faderport to use Stripable instead of Route
2016-05-31 15:30:43 -04:00
d5127001bb
move ControllableDescriptor from libpbd to libardour; add support for describing VCAs
2016-05-31 15:30:42 -04:00
5b5e64d860
remove Route::listening_via_monitor()
...
This is better tested with direct use of the solo_control and
Config->get_solo_controls_are_listen_controls()
2016-05-31 15:30:41 -04:00
69250b64ea
move ever close to working master/slave logic, this time with audio testing
2016-05-31 15:30:41 -04:00
653ae4acd6
universal change in the design of the way Route/Track controls are designed and used. The controls now own their own state, rather than proxy for state in their owners.
...
Massive changes all over the code to accomodate this. Many things are not finished. Consider this a backup safety commit
2016-05-31 15:30:40 -04:00
4b36593106
fix faderport and mackie to use route AutomationControls to be notified about solo/mute changes
2016-05-31 15:30:40 -04:00
d862c357b3
change faderport name
2016-02-06 16:42:34 -06:00
9cce8d10a9
faderport: save+restore footswitch setting
2016-02-03 11:53:56 -05:00
846afdd8e5
faderport: make blink/on/off status of record enable LED match the GUI one
2016-02-02 09:05:00 -05:00
f40167cb40
faderport: turn out all lights from destructor, and use Port::drain() to make sure data gets out
2016-02-01 13:27:08 -05:00
5b7fa0b3c5
faderport: add footswitch button
2016-01-25 15:11:26 -05:00
9e5b7db89f
first compiling, mostly working version of group controls changes
2016-01-22 11:58:31 -05:00
64c9198d60
add group disposition argument to Route::set_gain() and use it in various UIs
...
Executive decisions were necessary in a couple of places about the correct group disposition
behaviour, notably faderport and OSC surfaces
2016-01-18 12:11:09 -05:00
5e4d9612e3
faderport: stop event loop when destroying object
2016-01-14 10:59:27 -05:00
d134ba037d
fix compilation of debug builds
...
ArdourSurface::FaderPort::Button::name is private
2016-01-11 11:07:09 +01:00
530dd4255c
faderport: remove wierd shift use design; make user+shift work again
2016-01-10 23:32:21 -05:00
58edc83d11
tweak/add faderport debug messages
2016-01-07 16:42:57 -05:00
0d9efc1148
redesign cross-thread registration/signalling system
...
This new design will work even when threads that need to receive
messages from RT threads are created *after* the RT threads. The
existing design would fail because the RT thread(s) would never
be known the later created threads, and so signals emitted by the
RT thread and causing call_slot() in the receiver would end up
being enqueued using a lock-protected list. The new design ensures
that communication always uses a lock-free FIFO instead
2015-12-28 10:14:17 -05:00
ff76ef86b4
faderport: long press on fader mode buttons switches fader automation to manual/off; off button is never sent an LED state message to avoid fader disabling
2015-12-14 14:42:12 -05:00
e928edca32
faderport: fix setup of periodic callback (cut-n-paste error)
2015-12-14 14:41:38 -05:00
d59739d728
faderport: add 100msec (10Hz) periodic update to facilitate automation playback
2015-12-14 13:28:31 -05:00
40a352e8a1
faderport: disable automation state button mapping until (if ever) we can figure out why it kills the fader
2015-12-14 13:28:31 -05:00
cc607fa161
fix DEBUG_TRACE messages from faderport that used MackieControlProtocol via cut-n-paste
2015-12-14 13:28:31 -05:00
6c99576250
faderport: stop trying to cache LED state (fixes various bugs); blink mute for muted-by-others; blink transport for speed != 1.0 && != 0
2015-12-08 11:09:50 -05:00
2f48997dfb
remove unnecessary (?) conditional.
...
Given that we use "port" after the test, the test makes no sense
2015-12-07 12:38:17 -05:00
e3d2898c8d
more Faderport debugging, for windows
2015-12-04 18:11:05 -06:00
a9ce37b7ac
faderport: fix long press behaviour, and fix ardour-only behaviour with user button when used as a modifier
2015-12-03 18:38:09 -05:00
b07d86ac61
make faderport support report its port bundles as it should
2015-12-03 12:50:32 -05:00
900f59dcde
faderport: generalized blink on/off code
2015-12-03 08:36:56 -05:00
43e5d639cc
Faderport: Punch indictor was being left on after blinking
2015-12-03 07:27:42 -06:00
20facc4d18
Faderport: map automation indicator LEDs
2015-12-02 20:06:29 -06:00
90275ded6a
faderport: a clever hack to make the Shift modifier "sticky"
...
The user can now press+release Shift, then another key OR press Shift, then another key before releasing Shift. Both
event sequences will have the same result
2015-12-02 17:40:58 -05:00
ee9524c9b6
faderport: make punch button LED indicate punch status
2015-12-01 18:45:43 -05:00
cb965cba16
start tweaks to make Shift sticky; remove Shift-press combobox from gui since we don't allow that to be bound (next-marker)
2015-12-01 16:19:16 -05:00
37961a6bbe
faderport: switch long-press mechanism to a timeout
...
This makes the long press action fire after the timeout even if the user is still holding the button,
which feels more satisfactory
2015-12-01 13:15:38 -05:00
03a4926790
faderport: allow User button to be bound to ANY possible action.
...
This does involve nagivating some really gnarly menus, which is unfortunate, but we don't have a good general
solution for this yet (it is fundamentally the same problem that affects the key binding editor and Mackie support
2015-12-01 11:20:09 -05:00
