f03f2e5c3f
use new record safe control in surface support
2016-05-31 15:30:45 -04:00
cefd3ac8be
convert faderport to use Stripable instead of Route
2016-05-31 15:30:43 -04:00
d5127001bb
move ControllableDescriptor from libpbd to libardour; add support for describing VCAs
2016-05-31 15:30:42 -04:00
5b5e64d860
remove Route::listening_via_monitor()
...
This is better tested with direct use of the solo_control and
Config->get_solo_controls_are_listen_controls()
2016-05-31 15:30:41 -04:00
69250b64ea
move ever close to working master/slave logic, this time with audio testing
2016-05-31 15:30:41 -04:00
653ae4acd6
universal change in the design of the way Route/Track controls are designed and used. The controls now own their own state, rather than proxy for state in their owners.
...
Massive changes all over the code to accomodate this. Many things are not finished. Consider this a backup safety commit
2016-05-31 15:30:40 -04:00
4b36593106
fix faderport and mackie to use route AutomationControls to be notified about solo/mute changes
2016-05-31 15:30:40 -04:00
ba78359129
prepare for update to waf 1.8
...
uselib is no longer implicit (inherited by .use). This is still incomplete,
some uselibs for non-linux variants may be missing.
bld.is_defined("HAVE_XXX") also no longer works and will have to be
changed (I think to bld.env["HAVE_XXX"]) in countless places.
2016-02-28 21:16:44 +01:00
c932c56233
cleanup post-rebase-against-master messes
2016-02-22 15:31:25 -05:00
d862c357b3
change faderport name
2016-02-06 16:42:34 -06:00
9cce8d10a9
faderport: save+restore footswitch setting
2016-02-03 11:53:56 -05:00
e38fad6228
faderport: fix binding of actions to footswitch
2016-02-02 09:21:13 -05:00
846afdd8e5
faderport: make blink/on/off status of record enable LED match the GUI one
2016-02-02 09:05:00 -05:00
f40167cb40
faderport: turn out all lights from destructor, and use Port::drain() to make sure data gets out
2016-02-01 13:27:08 -05:00
90d12b6d5a
faderport: add a few more sensible actions to the footswitch options
2016-01-25 15:11:47 -05:00
b02b6cc3cd
faderport: add footswitch combos to GUI to allow user control over what the switch does
2016-01-25 15:11:36 -05:00
5b7fa0b3c5
faderport: add footswitch button
2016-01-25 15:11:26 -05:00
9e5b7db89f
first compiling, mostly working version of group controls changes
2016-01-22 11:58:31 -05:00
64c9198d60
add group disposition argument to Route::set_gain() and use it in various UIs
...
Executive decisions were necessary in a couple of places about the correct group disposition
behaviour, notably faderport and OSC surfaces
2016-01-18 12:11:09 -05:00
5e4d9612e3
faderport: stop event loop when destroying object
2016-01-14 10:59:27 -05:00
d134ba037d
fix compilation of debug builds
...
ArdourSurface::FaderPort::Button::name is private
2016-01-11 11:07:09 +01:00
530dd4255c
faderport: remove wierd shift use design; make user+shift work again
2016-01-10 23:32:21 -05:00
58edc83d11
tweak/add faderport debug messages
2016-01-07 16:42:57 -05:00
d7078df3eb
amend 9e3299f for Mixbus
2016-01-03 20:39:47 +01:00
9e3299f97d
change Controllable::set_value() API to include grouped control consideration.
...
This also removes Route::group_gain_control() and associated machinery.
Not yet tested with Mackie or other surfaces. More work to done to
start using the group capabilities, and also potentially to add
or derive more controls as RouteAutomationControls
2016-01-02 04:58:30 -05:00
0d9efc1148
redesign cross-thread registration/signalling system
...
This new design will work even when threads that need to receive
messages from RT threads are created *after* the RT threads. The
existing design would fail because the RT thread(s) would never
be known the later created threads, and so signals emitted by the
RT thread and causing call_slot() in the receiver would end up
being enqueued using a lock-protected list. The new design ensures
that communication always uses a lock-free FIFO instead
2015-12-28 10:14:17 -05:00
ff76ef86b4
faderport: long press on fader mode buttons switches fader automation to manual/off; off button is never sent an LED state message to avoid fader disabling
2015-12-14 14:42:12 -05:00
e928edca32
faderport: fix setup of periodic callback (cut-n-paste error)
2015-12-14 14:41:38 -05:00
d59739d728
faderport: add 100msec (10Hz) periodic update to facilitate automation playback
2015-12-14 13:28:31 -05:00
40a352e8a1
faderport: disable automation state button mapping until (if ever) we can figure out why it kills the fader
2015-12-14 13:28:31 -05:00
cc607fa161
fix DEBUG_TRACE messages from faderport that used MackieControlProtocol via cut-n-paste
2015-12-14 13:28:31 -05:00
14ef6017f6
add a few new actions to Faderport menus, and reorganize them slightly
2015-12-10 17:25:29 -06:00
6c99576250
faderport: stop trying to cache LED state (fixes various bugs); blink mute for muted-by-others; blink transport for speed != 1.0 && != 0
2015-12-08 11:09:50 -05:00
2f48997dfb
remove unnecessary (?) conditional.
...
Given that we use "port" after the test, the test makes no sense
2015-12-07 12:38:17 -05:00
e3d2898c8d
more Faderport debugging, for windows
2015-12-04 18:11:05 -06:00
0a997f62cc
remove spurious printout
2015-12-04 17:32:23 -06:00
e82cc88c6f
faderport: show current User button bindings in GUI
2015-12-03 21:45:41 -05:00
a9ce37b7ac
faderport: fix long press behaviour, and fix ardour-only behaviour with user button when used as a modifier
2015-12-03 18:38:09 -05:00
b07d86ac61
make faderport support report its port bundles as it should
2015-12-03 12:50:32 -05:00
900f59dcde
faderport: generalized blink on/off code
2015-12-03 08:36:56 -05:00
43e5d639cc
Faderport: Punch indictor was being left on after blinking
2015-12-03 07:27:42 -06:00
20facc4d18
Faderport: map automation indicator LEDs
2015-12-02 20:06:29 -06:00
90275ded6a
faderport: a clever hack to make the Shift modifier "sticky"
...
The user can now press+release Shift, then another key OR press Shift, then another key before releasing Shift. Both
event sequences will have the same result
2015-12-02 17:40:58 -05:00
aaebeb3d2b
fix typo in variable name
2015-12-02 00:59:32 +01:00
0544e74fdf
merge from mixbus branch.
...
keep control surfaces special cases upstream.
2015-12-02 00:55:01 +01:00
b0fe298f72
faderport: factor out encoder divider into a const double
2015-12-01 18:47:29 -05:00
ee9524c9b6
faderport: make punch button LED indicate punch status
2015-12-01 18:45:43 -05:00
fd44adfe01
faderport: change panning dividers to give full range across very roughly 270 degrees of rotation
2015-12-01 18:32:55 -05:00
cb965cba16
start tweaks to make Shift sticky; remove Shift-press combobox from gui since we don't allow that to be bound (next-marker)
2015-12-01 16:19:16 -05:00
37961a6bbe
faderport: switch long-press mechanism to a timeout
...
This makes the long press action fire after the timeout even if the user is still holding the button,
which feels more satisfactory
2015-12-01 13:15:38 -05:00
