Use the proper html entity for infinity

include/foldback-strip.html

@@ -127,7 +127,7 @@
   same as the gain of the track or bus the send comes from for the current
   Foldback bus</li>
   <li><kbd class="menu">Set sends gain to -inf</kbd> sets the gain on all sends
-  for the current Foldback bus to -inf (the lowest gain possible)</li>
+  for the current Foldback bus to &minus&infin; (the lowest gain possible)</li>
   <li><kbd class="menu">Set sends gain to 0dB</kbd> sets the gain on all sends
   for the current Foldback bus to 0dB</li>
 </ul>
@@ -149,7 +149,7 @@
 		on the send to be the same as the gain of the track or bus the send
 		comes from for the current Foldback bus</li>
 		<li><kbd class="menu">Set send gain to -inf</kbd> sets the send gain
-		for the current Foldback bus to -inf (the lowest gain possible)</li>
+		for the current Foldback bus to &minus&infin; (the lowest gain possible)</li>
 		<li><kbd class="menu">Set send gain to 0dB</kbd> sets the send gain
 		for the current Foldback bus to 0dB</li>
 		<li><kbd class="menu">Remove This Send</kbd> removes the send from the

include/monitor-section.html

@@ -92,9 +92,9 @@
   The rotary control has a range of 0dB to +10dB and can be set at any point between these two values.
   A drop down menu with pre-defined values is also provided for convenience.</td></tr>
   <tr><th>SiP Cut</th><td>Only relevant to Solo in Place mode. This sets the level that all muted tracks
-  or busses will be muted by. By default it is -&infin; i.e. the non soloed tracks are totally inaudible.
+  or busses will be muted by. By default it is &minus;&infin; i.e. the non soloed tracks are totally inaudible.
   The level can be raised to make the other tracks audible, though dimmed. This is also sometimes referred
-  to <em>Solo in Front</em>. The rotary control has a range of -inf to +0dB and can be set at any point
+  to <em>Solo in Front</em>. The rotary control has a range of &minus&infin; to +0dB and can be set at any point
   between these two values. A drop down menu with pre-defined values is also provided for convenience.</td></tr>
 </table>
 
@@ -133,7 +133,7 @@
 <h2>Global Monitor level</h2>
 
 <p>
-  This control sets the level for Monitor Section output. The rotary control has a range of -&infin;
+  This control sets the level for Monitor Section output. The rotary control has a range of &minus&infin;
   to +6dB and can be set at any point between these two values. A drop down menu with pre-defined values
   is also provided for convenience.
 </p>

include/muting-and-soloing.html

@@ -99,10 +99,10 @@
   When using solo-in-place (SiP), in other words when soloed tracks are being
   listened to on the master bus, this fader specifies the gain that will be
   applied to other tracks in order to mute them. Setting this level to
-  -∞ dB will mean that other tracks will not be heard at all; setting to
+  &minus∞ dB will mean that other tracks will not be heard at all; setting to
   some higher value less than 0dB means that other non-soloed tracks will be heard, just
   reduced in volume compared to the soloed tracks. Using a value
-  larger than -∞ dB is sometimes called "Solo-In-Front" by other DAWs, because
+  larger than &minus∞ dB is sometimes called "Solo-In-Front" by other DAWs, because
   the listener has the sense that soloed material is "in front" of other
   material. In Ardour, this is not a distinct mode, but instead the mute cut
   control offers any level of "in-front-ness" that is desired.

include/osc-control-for-ardour-4.7-and-prior.html

@@ -98,7 +98,7 @@ here</em>"/&gt;</kbd>
   <tr><th><kbd class="osc">/ardour/routes/recenable <em>rid</em> <em>rec_st</em></kbd></th>
   <td>where <em>rec_st</em> is a bool/int representing the desired rec state of the track</td></tr>
   <tr><th><kbd class="osc">/ardour/routes/gainabs <em>rid</em> <em>gain_abs</em></kbd></th>
-  <td>where <em>gain_abs</em> is a float ranging from 0 to 2 (0 being -infinite, 1 being 0dB and 2 being +6dB).</td></tr>
+  <td>where <em>gain_abs</em> is a float ranging from 0 to 2 (0 being &minus&infin;, 1 being 0dB and 2 being +6dB).</td></tr>
   <tr><th><kbd class="osc">/ardour/routes/gaindB <em>rid</em>  <em>gain_db</em></kbd></th>
   <td>where <em>gain_db</em> is a float ranging from -400 to 6 representing the desired gain of the track in dB.</td></tr>
   <tr><th><kbd class="osc">/ardour/routes/trimabs <em>rid</em> <em>trim_abs</em></kbd></th>

include/osc58-controlling-ardour-with-osc.html

@@ -201,7 +201,7 @@ here</em>"/&gt;</kbd>
   Gainmode is an int:
   <ul>
 	  <li><em>0:</em> dB value as a float from -193 to +6. Sent as
-	  <kbd class="osc">/strip/gain SSID value</kbd>. (-193 or below are the same as -inf)</li>
+	  <kbd class="osc">/strip/gain SSID value</kbd>. (-193 or below are the same as &minus;&infin;)</li>
 	  <li><em>1:</em> A positional fader based on the same math
 	  as Ardour's GUI.  A Float from 0 to 1. Sent as
 	  <kbd class="osc">/strip/fader SSID value</kbd>. At the same time the