diff --git a/include/foldback-strip.html b/include/foldback-strip.html
index 8f63678..296e5f8 100644
--- a/include/foldback-strip.html
+++ b/include/foldback-strip.html
@@ -127,7 +127,7 @@
same as the gain of the track or bus the send comes from for the current
Foldback bus
sets the gain on all sends
- for the current Foldback bus to -inf (the lowest gain possible)
+ for the current Foldback bus to &minus∞ (the lowest gain possible)
sets the gain on all sends
for the current Foldback bus to 0dB
@@ -149,7 +149,7 @@
on the send to be the same as the gain of the track or bus the send
comes from for the current Foldback bus
sets the send gain
- for the current Foldback bus to -inf (the lowest gain possible)
+ for the current Foldback bus to &minus∞ (the lowest gain possible)
sets the send gain
for the current Foldback bus to 0dB
removes the send from the
diff --git a/include/monitor-section.html b/include/monitor-section.html
index 4348b53..1181018 100644
--- a/include/monitor-section.html
+++ b/include/monitor-section.html
@@ -92,9 +92,9 @@
The rotary control has a range of 0dB to +10dB and can be set at any point between these two values.
A drop down menu with pre-defined values is also provided for convenience.
SiP Cut | Only relevant to Solo in Place mode. This sets the level that all muted tracks
- or busses will be muted by. By default it is -∞ i.e. the non soloed tracks are totally inaudible.
+ or busses will be muted by. By default it is −∞ i.e. the non soloed tracks are totally inaudible.
The level can be raised to make the other tracks audible, though dimmed. This is also sometimes referred
- to Solo in Front. The rotary control has a range of -inf to +0dB and can be set at any point
+ to Solo in Front. The rotary control has a range of &minus∞ to +0dB and can be set at any point
between these two values. A drop down menu with pre-defined values is also provided for convenience. |
@@ -133,7 +133,7 @@
Global Monitor level
- This control sets the level for Monitor Section output. The rotary control has a range of -∞
+ This control sets the level for Monitor Section output. The rotary control has a range of &minus∞
to +6dB and can be set at any point between these two values. A drop down menu with pre-defined values
is also provided for convenience.
diff --git a/include/muting-and-soloing.html b/include/muting-and-soloing.html
index fc93ddd..c2a6721 100644
--- a/include/muting-and-soloing.html
+++ b/include/muting-and-soloing.html
@@ -99,10 +99,10 @@
When using solo-in-place (SiP), in other words when soloed tracks are being
listened to on the master bus, this fader specifies the gain that will be
applied to other tracks in order to mute them. Setting this level to
- -∞ dB will mean that other tracks will not be heard at all; setting to
+ &minus∞ dB will mean that other tracks will not be heard at all; setting to
some higher value less than 0dB means that other non-soloed tracks will be heard, just
reduced in volume compared to the soloed tracks. Using a value
- larger than -∞ dB is sometimes called "Solo-In-Front" by other DAWs, because
+ larger than &minus∞ dB is sometimes called "Solo-In-Front" by other DAWs, because
the listener has the sense that soloed material is "in front" of other
material. In Ardour, this is not a distinct mode, but instead the mute cut
control offers any level of "in-front-ness" that is desired.
diff --git a/include/osc-control-for-ardour-4.7-and-prior.html b/include/osc-control-for-ardour-4.7-and-prior.html
index 7a60396..cc450c2 100644
--- a/include/osc-control-for-ardour-4.7-and-prior.html
+++ b/include/osc-control-for-ardour-4.7-and-prior.html
@@ -98,7 +98,7 @@ here"/>
/ardour/routes/recenable rid rec_st |
where rec_st is a bool/int representing the desired rec state of the track |
/ardour/routes/gainabs rid gain_abs |
- where gain_abs is a float ranging from 0 to 2 (0 being -infinite, 1 being 0dB and 2 being +6dB). |
+ where gain_abs is a float ranging from 0 to 2 (0 being &minus∞, 1 being 0dB and 2 being +6dB). |
/ardour/routes/gaindB rid gain_db |
where gain_db is a float ranging from -400 to 6 representing the desired gain of the track in dB. |
/ardour/routes/trimabs rid trim_abs |
diff --git a/include/osc58-controlling-ardour-with-osc.html b/include/osc58-controlling-ardour-with-osc.html
index 0e84e09..239e01e 100644
--- a/include/osc58-controlling-ardour-with-osc.html
+++ b/include/osc58-controlling-ardour-with-osc.html
@@ -201,7 +201,7 @@ here"/>
Gainmode is an int:
- 0: dB value as a float from -193 to +6. Sent as
- /strip/gain SSID value. (-193 or below are the same as -inf)
+ /strip/gain SSID value. (-193 or below are the same as −∞)
- 1: A positional fader based on the same math
as Ardour's GUI. A Float from 0 to 1. Sent as
/strip/fader SSID value. At the same time the
---|