f0f822feff
OSC: fix crash for wrong number of parameters in set_surface
2017-10-12 13:18:21 -07:00
514c43278b
OSC clean up route observer
2017-10-07 20:23:48 -07:00
30b087ab3d
globally change all use of "frame" to refer to audio into "sample".
...
Generated by tools/f2s. Some hand-editing will be required in a few places to fix up comments related to timecode
and video in order to keep the legible
2017-09-18 12:39:17 -04:00
e07bb07899
OSC: Change jog mode should not stop transport
...
unless started by scrub or shuttle.
2017-08-27 14:15:34 -07:00
dbab25f537
OSC: same fix for /select/*
2017-08-25 10:22:42 -07:00
d7fcdbfe1d
OSC: account for user sending the wrong number of paramters gracefully
2017-08-25 09:45:06 -07:00
ca2d254fdb
OSC cue button up events should not be errors, fixed
2017-08-21 20:08:19 -07:00
ab621b550d
OSC: /cue/enable feedback not changing fixed
2017-08-21 12:10:27 -07:00
6b810b67d9
OSC: aux bus detection fixed for mixbus
2017-08-21 08:40:22 -07:00
Paul Hedderly
18060e597e
prh: Small fix to /cue/send/enable feedback string
2017-08-21 16:23:23 +02:00
6ad4379b4d
OSC: fix issue #7444 send fader position/gain even when 0.
2017-08-10 08:50:46 -07:00
81f12f602b
OSC: Fix to make sure buses created with Ardour 4.7 sessions show up
2017-08-03 09:09:02 -07:00
d1558dcab5
OSC: Add command to select Master
2017-08-02 10:43:13 -07:00
ab02284fc2
OSC: expand plugin_descriptor to split into smaller OSC messages (issue #0007433 )
2017-08-01 07:23:27 -07:00
e4925a90cb
OSC: add param to plugin_list response which indicates plugin enable state (OnkelDead)
2017-08-01 07:04:59 -07:00
f51fab35b1
OSC: Make stripname refresh in automation play mode as well.
2017-07-31 07:55:09 -07:00
e94771a58f
OSC: fix VCAs try to connect to controls it does not have.
2017-07-30 18:35:38 -07:00
2fa34614d0
Remove unnecessary tests for touch-state
2017-07-25 20:16:04 +02:00
b694ee9e53
OSC: only use gain change signals if value changes
2017-07-24 10:21:31 -07:00
3ab4a1d147
OSC: add use groups to GUI
2017-07-24 10:21:31 -07:00
f3e0fcbb7e
OSC: port mode by default should be manual
2017-07-24 10:21:31 -07:00
f1632fcfd2
OSC: make sure initialization is complete before we allow periodic to run
2017-07-23 20:08:02 -07:00
07e869fda8
OSC: simplify route observer
2017-07-23 20:08:02 -07:00
fde0e293a3
Remove unused "mark" parameter from stop_touch() API
2017-07-24 01:59:18 +02:00
1508838bde
OSC: add /use_group 1/0 command
2017-07-22 12:12:41 -07:00
8af27a7a2e
OSC make all group dispositions the same
2017-07-21 08:22:02 -07:00
2a809dcf70
OSC: add delta controls to master, monitor and select as well
2017-07-05 08:08:57 -07:00
b11c64ea5b
OSC: GUI tweaking
2017-07-03 13:22:56 -07:00
ec76d7ce03
OSC: GUI indicate invalid port and set to old port on defocus if not valid
2017-07-02 08:28:34 -07:00
c42db10044
OSC: issue 7176 patch applied. shows plugin descriptors.
2017-07-01 13:13:04 -07:00
2219021389
OSC: add feedback for solo isolate and solo safe to strips (issue 7161)
2017-07-01 11:49:08 -07:00
8bc25fb971
OSC: add strip type flag for master and monitor to strip list
2017-07-01 11:14:55 -07:00
a967a942d2
OSC: include all of select in feedback[13]
2017-06-30 20:47:42 -07:00
296c9ae03e
OSC: try to prevent race when clearing devices
2017-06-30 20:13:18 -07:00
41bc5bc116
OSC: test param type in a way that works when optimized too.
2017-06-30 19:05:30 -07:00
86ee4de7a9
OSC: simplify GUI and make less error-prone
2017-06-24 13:13:53 -07:00
33bfe681c9
OSC: Allow /bank_up to accept -1 as well as 1 so encoder can work.
2017-06-23 18:08:04 -07:00
01e75da96b
OSC: make sed_fader work with banking too.
2017-06-23 17:34:22 -07:00
0b21143234
OSC: Add master_send_enable for MB
2017-06-23 17:09:54 -07:00
1fad162256
OSC: redo math for redux control with fewer calls.
2017-06-23 17:09:54 -07:00
2ea14c25ec
OSC: Messages too fast at bank_change/refresh slowed down.
2017-06-23 17:09:54 -07:00
2a08746437
OSC: Fix math error in send fader feedback
2017-06-23 14:26:29 -07:00
5aad9d9a33
OSC: only show visible plugins (not MB channel strip PI)
2017-06-22 22:40:06 -07:00
7af5de2074
OSC: Add increment fader.
2017-06-22 12:54:03 -07:00
57e7531b1f
OSC: allow mixbuses to show
2017-06-22 10:20:48 -07:00
3baf360733
OSC: use internal_to_interface or reverse
2017-06-22 09:21:51 -07:00
3b718c60de
OSC: Accept mixed parameter types for touch
2017-06-21 15:18:56 -07:00
cb48bb0e1c
remove min/max unbound -- LADSPA special case.
...
This explicit case should never have existed in the first place.
Plugins can always implicitly exceed the range and are expected to
cope with out-of-range values (e.g. meters when fed with a peaking signal
may return an out-of-bounds value)
2017-06-21 18:12:20 +02:00
567c0a8f53
Switch to PBD control-math and prefer Controllable API
...
Note: Control-surfaces should always use interface_to_internal()
and internal_to_interface().
2017-06-21 18:12:04 +02:00
fd3bd35203
OSC: value not initialized soon enough
2017-06-20 13:11:59 -07:00
0331a9a233
OSC: plugin feedback mathfix - 0 param (meter) checked for.
2017-06-16 11:33:02 -07:00
7c84deb2c4
OSC: Add send/plugin page values to GUI
2017-06-14 10:28:45 -07:00
d76e6d84c7
OSC: save and restore send/plugin page size.
2017-06-14 08:18:43 -07:00
9c0f6ea948
OSC: Allow set_surface to set send and plugin page sizes.
2017-06-13 16:56:10 -07:00
9441e8d484
OSC: select channel plugin support with paging.
2017-06-12 12:31:04 -07:00
8b8f47430a
OSC: add option to send /reply instead of #reply (OSC1.0 compat)
2017-06-10 09:43:46 -07:00
c4a4857b87
OSC: add optional paging to sends in select.
2017-06-06 09:08:35 -07:00
d35dfa9c93
OSC: Some surfaces may use float for ssid. Accept this too.
2017-05-31 08:39:55 -07:00
b343108756
OSC: check controllable exists before using
2017-05-31 08:39:55 -07:00
2c40b46ca9
OSC: fix return value for successful touch
2017-05-24 13:58:49 -07:00
1e95ccf07d
OSC: Added lpf and hpf controls for freq,enable and slope
2017-05-24 07:37:21 -07:00
f493b24e3e
OSC add feedback for extra comp and eq controls
2017-05-23 17:16:42 -07:00
2f1ad4d9a2
OSC - make /strip/list accept a parameter like everything else
2017-05-23 15:14:31 -07:00
b3fb75fead
OSC: Further fixes so multiple controls can touch at once.
2017-05-20 10:17:31 -07:00
ab069b1372
OSC: fix c++98 mistake
2017-05-20 09:09:01 -07:00
6926b7eb75
OSC: Catch case of surface sending fader move before touch
2017-05-19 15:48:36 -07:00
84e1a216bc
OSC: Add fake timeout based touch
2017-05-18 15:32:12 -07:00
f2aac0bcae
OSC: Add /strip/fader/touch
2017-05-15 19:38:41 -07:00
f3f1816899
remove unused variable
2017-05-15 19:38:41 -07:00
7e791981f0
OSC: added automation name feedback
2017-05-15 07:43:59 -07:00
fee4b7b3ea
OSC: combine two identical if() statements
2017-05-15 07:43:59 -07:00
3d26a29e8a
Sanitize "well-known" ctrl API
2017-05-14 00:17:11 +02:00
3e2004aa73
OSC: make /*/automation more generic so other controls can be easily added
2017-05-13 14:18:29 -07:00
32c3db5c59
OSC: GUI label change
2017-05-12 07:29:29 -07:00
774ebc42e3
OSC: Create new surface struct for ALL incoming messages
2017-05-12 07:29:29 -07:00
eb3f50e15c
change the way ControlProtocols (control surfaces) are notified and handle Stripable selection changes
...
The Editor continues to notify them, but via a direct call to ControlProtocolManager, not a signal.
The CP Manager calls the ControlProtocol static method to set up static data structures holding
selection info for all surfaces and then notifies each surface/protocol that selection has changed.
2017-05-12 14:51:39 +01:00
471ed5af4e
OSC: also init unsaved params on session load.
2017-05-11 13:58:25 -07:00
a51e82a29e
OSC: Initialize all surface struct values on creation
2017-05-11 10:52:38 -07:00
d42da9046e
OSC: Actually set feedback on first /strip/command
2017-05-11 08:21:40 -07:00
0124c2e99d
OSC: fix manual port setting to take effect on first incoming message
2017-05-10 14:14:27 -07:00
a76ee7a4d8
OSC: bind should be boost::bind
2017-05-10 09:56:45 -07:00
c8f805ef7c
OSC: Automation feedback should match command
2017-05-10 09:42:48 -07:00
6c97d70127
OSC: change function name to be better description
2017-05-10 09:21:19 -07:00
50e362ffd3
OSC: simplify code.
2017-05-10 08:02:03 -07:00
86149840a1
resolve ambiguity
2017-05-10 05:00:03 +02:00
e8387e101f
Enums are not Classes in C++98
2017-05-10 04:29:41 +02:00
82fed14f41
OSC: Fix select fader automation play feedback as well fixes issue #7160
2017-05-09 14:10:49 -07:00
a12d4c87c6
OSC: Get gain feedback to show with automation Play.
2017-05-09 13:38:57 -07:00
c3c7dfd3e8
OSC: Add Automation mode feedback to /strip
2017-05-09 12:40:20 -07:00
155401b875
OSC: removed letter automation modes to not conflict with feedback
2017-05-09 11:52:21 -07:00
fe5a778535
OSC: Propagate return value so debug shows errors
2017-05-09 09:05:30 -07:00
56ebea48c0
OSC: set Automation mode for fader
2017-05-09 07:55:32 -07:00
f4d62a2a8e
OSC: automation mode get strip (step 2)
2017-05-09 07:55:32 -07:00
9b4d58393d
OSC: Add framework for /*/automation mode
2017-05-09 07:55:32 -07:00
1eb18f8e27
OSC: make some more paths work with or without a parameter.
2017-05-05 15:02:22 -07:00
379ad3357d
OSC: remove debug output.
2017-05-05 15:02:22 -07:00
0c035778e1
libardour now has CoreSelection object to manage selection status of Stripables and AutomationControls
2017-05-05 18:56:25 +01:00
a3c70696b6
OSC: personal monitoring, fix crash and minor bugs
2017-05-04 15:52:09 -07:00
c784f70966
OSC: Add /jog/mode/name
2017-05-03 21:38:52 -07:00
16e545ad73
OSC: Fix puctuation
2017-05-03 21:36:58 -07:00
2cb54dec60
OSC: arrange modes in a more logical order.
2017-05-03 18:19:45 -07:00
2bbf83e109
OSC: Add multimode /jog command
2017-05-03 16:33:33 -07:00
2abefde534
OSC scrub, fix numbers to work with usec rather than msec.
2017-05-01 13:53:03 -07:00
e5182f3eb4
OSC: fix scrub to not use boost ptime.
2017-05-01 13:45:47 -07:00
5f06ae43d8
OSC: add /scrub function
2017-05-01 07:08:02 -07:00
2012dc2553
OSC: correct spelling
2017-04-21 07:29:13 -07:00
0df955412e
Use XMLNode::set_property in OSC_GUI class
2017-04-19 09:36:54 +10:00
6c1e7153ef
Use XMLNode::get/set_property API in OSC class
2017-04-19 09:36:54 +10:00
eb1bd9d8e2
OSC: don't skip when deleting cue observers
2017-03-29 16:24:43 -07:00
8de580c123
OSC: Clear devices should clear cue observers as well.
2017-03-29 16:07:21 -07:00
e7ca514887
OSC: reduce feedback noise for surfaces using /strip/list
2017-03-26 21:16:45 -07:00
f5931457fb
OSC: tell surfaces using /strip/list they need to rebuild after strip add/remove
2017-03-24 14:05:39 -07:00
011c4a05d8
OSC: update /strip/list response to add aux, midi bus and VCAs
2017-03-24 13:07:03 -07:00
7d41e542fe
OSC: add feedback for /monitor/mute,dim,mono
2017-03-19 08:54:58 -07:00
b0e5ab1b81
OSC add /monitor/mute,dim,mono
2017-03-18 20:05:04 -07:00
891ad41c48
OSC: fix pan stuck at centre.
2017-03-15 13:24:13 -07:00
175027fb6c
OSC amend access_action with action in line to ignore if param is 0
2017-03-15 09:20:42 -07:00
cd4462323f
OSC: add new /access_action/group/action f 1 for float only controllers
2017-03-14 18:47:41 -07:00
248521221c
OSC debug: "ALL" == all messages incl. invalid ones
2017-03-13 22:35:07 +01:00
df52c8c748
OSC: correct busses spelling in GUI
2017-02-25 08:49:18 -08:00
6fbdfa353b
OSC: remove invalid feedback for solo and pan az.
2017-02-23 15:45:28 -08:00
9d8829f5bf
Remove direct calls to set solo_control()
...
Changing solo-state needs to be done in rt-context to atomically
propagate solo/mute.
set_control() queues a rt-event, later Session::rt_set_control() calls
Session::update_route_solo_state() to propagate solo/mute.
2017-02-17 03:58:51 +01:00
38e47c2f5f
Accommodate newly introduced source(s) in our MSVC project (ardour_osc)
2017-01-13 10:18:38 +00:00
c9715af5d9
OSC: We want to see aux buses even if the gui has them hidden
2017-01-11 19:57:19 -08:00
19e6273502
OSC: Fix aux mute to check stripable exists first
2017-01-10 22:09:30 -08:00
bcbe8424ad
fix nested templates for ye ancient compilers of the worlde
2017-01-10 09:58:26 +00:00
27773ed1b3
OSC: Fix cue observer stop to zero controls
2017-01-09 19:05:38 -08:00
b073328700
OSC: Add Talent individual monitor controls
2017-01-09 18:56:22 -08:00
564d6c4e3c
OSC: remove unused overall feedback calls and variables
2016-12-31 08:01:23 -08:00
49d53bc98d
OSC: remove feedback enable from GUI (unused)
2016-12-31 07:42:51 -08:00
c8d0015986
Tear down OSC settings GUI, when the protocol is disabled
2016-12-28 22:59:49 +01:00
d1e869f96d
Move "Feedback" option to control-portocol settings
2016-12-28 22:59:15 +01:00
2614b0df43
OSC: Solo toggle should maintain state when locked, rec and rec_safe should show true state.
2016-11-27 20:52:14 -08:00
8ddeca133b
OSC: Squelch select feedback when no feedback is configured.
2016-11-27 18:32:50 -08:00
d26aac9020
OSC: no op, white space cleanup
2016-11-26 10:23:36 -08:00
c7f8471d52
OSC: Make plugin and plugin parameter numbering 1 based to match everything else.
2016-11-26 09:18:36 -08:00
5bf8a5537b
OSC: Add patch from 7137 and make it work for manual port selection.
2016-11-25 10:10:49 -08:00
98f1cb76ed
OSC: Patch from 7136 added cleaned and tested.
2016-11-25 07:26:18 -08:00
97f81479d3
fix ambiguity
2016-11-19 01:36:34 +01:00
b4b600a7b8
Generally speaking we use Glib::usleep() now in preference to standard ::usleep()
2016-11-18 20:01:43 +00:00
3e3791b72e
OSC: mark session dirty if setup changes
2016-11-18 08:43:58 -08:00
1015e19ad3
OSC: issue 7116 fix send enable not working
2016-11-18 07:53:40 -08:00
91c2527f5c
OSC: Fix default strip types to include Auxes.
2016-11-04 12:10:37 -07:00
77c9106769
OSC: Make Aux buses able to be separate.
2016-10-30 17:50:38 -07:00
9d63002d2f
OSC: Slow down data storm at surface refresh
2016-10-29 10:56:44 -07:00
82d3842656
OSC: Add names/fader value to master and monitor.
2016-10-28 17:34:17 -07:00
e631119092
OSC: simplify int sends too.
2016-10-28 15:05:40 -07:00
d802c982cb
OSC: More simplification - floats this time.
2016-10-28 14:42:56 -07:00
4eb2da491f
OSC: simplify Global feedback (remove repetitive code)
2016-10-28 13:45:30 -07:00
5743013ae4
OSC fix debug logic for catchall messages
2016-10-23 19:00:20 -07:00
