13
0
Commit Graph

57 Commits

Author SHA1 Message Date
Johannes Mueller
18511f851e Put duplicate code of a-comp and a-expander into one file ...
... for better maintainability

consolidated duplicate code:
  * drawing the dB-grid of a-comp's and a-expander's full display
  * drawing the gain reduction bar of a-comp's and a-expander's full display
  * the entire only-bars display
2018-06-20 22:57:41 +02:00
Johannes Mueller
0c64eacef5 Consolidated a-comp/a-exp run_mono() and run_stereo() to one run()
Up to now we had in a-comp and a-exp one run_mono() and one run_stero()
function which where almost identical except that run_stereo() treated two
in/outs and run_mono() only one. Now we store the number of channels
acomp->n_channels according to the URI and in run() we loop over an array of
pointers to the in/out buffers.
2018-06-20 22:23:54 +02:00
Johannes Mueller
1ad66cfb3c a-comp: makeup_gain needs to be smoothened after every sample ...
... not only once in every run
2018-06-20 21:06:16 +02:00
Johannes Mueller
a0a4db47a7 Add a control port to a-comp select which mode to display inline 2018-06-20 21:06:16 +02:00
Johannes Mueller
869d48c9a6 Make a-comp's meter show numerical values in "4.1f"
according to discussion in irc.
2018-06-20 21:06:16 +02:00
Johannes Mueller
89aa17fe00 Put input level meter before output level meter in the generic gui
This is done by relying on the fact that the generic gui orders the meters
according to their port indices.
2018-06-20 21:06:16 +02:00
Johannes Mueller
6da18b32b5 Visualize the peak of the compressor state in a-comp 2018-06-20 21:06:16 +02:00
Johannes Mueller
619ba94f51 Drop LPF of input level visualization in a-comp 2018-06-20 21:06:16 +02:00
Johannes Mueller
c9bbb01d98 Show the input level in acomp's inline display rather than output level 2018-06-20 21:06:16 +02:00
Johannes Mueller
ef978d1b35 Inlevel output port to visualize the input level in the generic GUI 2018-06-20 21:06:16 +02:00
Johannes Mueller
87ea757a5d Improve level vizualisation in a-comp
* LPF in the signal visialization

* Lower minimum values
2018-06-20 21:06:16 +02:00
Johannes Mueller
3e124704b0 GR-based visualization in a-comp 2018-06-20 21:06:16 +02:00
Johannes Mueller
d29880da89 New attack and release behavior for a-comp
Details in http://tracker.ardour.org/view.php?id=7439
2018-06-20 21:06:16 +02:00
Johannes Mueller
112ac13b90 Don't use acomp->v_gainr outside LV2_EXTENDED ifdefs 2018-06-20 21:06:16 +02:00
52aa9bf848 a-comp: Fix typo with previous patch 2017-11-12 00:16:44 +11:00
f3efff4c7e a-comp: Fix noise floor - asymptotics 2017-11-11 14:26:50 +11:00
Johannes Mueller
6663a26755 Signal wish to show inline display in gui by lv2:optionalFeature
... in .ttl file rather than by extension_data() in code. That's more in the
spirit of LV2.
2017-07-31 21:31:23 +02:00
Johannes Mueller
e75db87bf6 Tweaking the a-comp inline display a bit. Make it more skinny. 2017-07-31 21:31:23 +02:00
Johannes Mueller
2716ce41e0 Indicate whether to show plugin's inline display in GUI
This is currently done by an extension data similarly to
LV2_INLINEDISPLAY__interface.
2017-07-31 21:31:23 +02:00
Johannes Mueller
59775df9be Simplified inline display if the channel strip is not wide enough
If the width of the display area is below 200 px, we switch from the graph
display to displaying only two bars, one for output level and one for gain
reduction. In the bar mode we also visualize threshold and ratio.
2017-07-31 21:31:22 +02:00
Johannes Mueller
24cbb1b153 Honor attack and release parameters in a-comp's inline graph 2017-07-31 21:31:22 +02:00
Johannes Mueller
ccab32654b Indicate gain reduction in a-comp 2017-07-31 21:31:22 +02:00
e65ff3fb4a Show range -60 .. +10 dBFS in acomp's inline display 2017-07-31 21:31:22 +02:00
Johannes Mueller
85106d81a0 Set makeup to 0.f when bypassed also in stereo version 2017-07-31 21:31:22 +02:00
Johannes Mueller
29df879edd Adjust the indication of the treshold value by the makup gain.
When lifting the compressor curve by the makeup gain value the actual
treshold (the level when the curve kinks in) is also lifted. Therefore we need
to adjust the dashed line indicating the threshold as well as the level when
the color gradient to show compression kicks in.
2017-07-31 21:31:22 +02:00
Johannes Mueller
dff4153024 Also the stereo version needs to set need_expose 2017-07-31 21:31:22 +02:00
Johannes Mueller
f68754b19d Show a-comp's makeup grain in inline rendering 2017-07-31 21:31:22 +02:00
Johannes Mueller
0109042e7b Increase range of a-comp#stereo release time
Like for the mono version in f52443e17e
2017-07-21 16:11:17 +02:00
Jelle van der Waa
b1cf27bed4 Fix duplicate ‘const’ declaration specifier 2017-07-12 12:09:59 +02:00
5f1d94a7b2 Protect a-comp's display/state against NaN/Inf. 2016-11-29 09:04:13 +01:00
f52443e17e Increase range of a-comp release time.
This facilitates ducking music for voice-overs w/o hold-time.
2016-10-15 21:27:29 +02:00
aca6e667a8 update a-plugins to use official lv2plug.in URI 2016-09-18 19:07:49 +02:00
c6ef3a75d3 backwards compatible a-comp stereo sidechain ports 2016-08-27 18:08:46 +02:00
f814e68e30 Prepare a-comp for click-free bypass/enable 2016-08-27 17:14:49 +02:00
0fa1123f82 NO-OP clean up plugin ttl 2016-08-27 16:01:16 +02:00
613ae0c110 Nobody expects the LV2 inquisition! 2016-08-13 14:51:57 +02:00
dd88461942 clean up plugin ttls - always add semicolon for compatibility 2016-08-09 22:00:38 +02:00
62cd4d43bf a-Comp: Fix bug with DSP in the knee processing region 2016-07-20 20:10:46 +10:00
f71fdd4143 clean up a-comp, remove old prototype UI 2016-07-14 21:41:16 +02:00
43f8d2503c a-reverb prototype (based on setBfree b_reverb) 2016-07-12 16:43:10 +02:00
1f02dd2a85 fix compilation with lv2 < 1.10 (lv2 extended) 2016-07-12 13:44:55 +02:00
83e1d9fff3 tweak a-series plugin names 2016-07-05 17:17:59 +02:00
5966612a4f consistent use of fmaxf() in a-comp 2016-07-05 15:38:24 +02:00
a16c0c445a a-comp: Use input signal x as cutoff for inline comp curve 2016-07-05 18:36:04 +10:00
2a7bd996cd a-comp: Fix inline comp curve shading 2016-07-05 18:19:00 +10:00
bf7c4c7d60 a-comp: Fix peak level on both stereo and mono plugins 2016-07-05 15:07:06 +10:00
8507d2c9dd add required check for cairo in a-comp 2016-07-04 15:10:35 -04:00
2f7c167fc9 a-comp: Make ratio control logarithmic 2016-07-05 02:32:05 +10:00
46bfe2b51a a-comp: Add stereo version 2016-07-05 02:15:47 +10:00
a1a6dd3865 a-comp display is getting fancy :) 2016-07-04 15:50:05 +02:00