c5b93e2a01
track scrolling and zooming
2016-01-18 18:24:14 +01:00
27d82af077
add some horz and vert zoom actions; remove some whitespace from the code of the ui-actions, so they are easier to see and maintain
2016-01-18 18:24:14 +01:00
16623b1cb3
add more remote transport toggles for touchOSC: midi_panic, toggle_roll, stop_forget, set_X_range, quick snapshots. also add boilerplate for monitor controls, but those are not implemented yet
2016-01-18 18:24:14 +01:00
36e1ff48bc
implement mark_in, mark_out, toggle_click
2016-01-18 18:24:14 +01:00
f0d9295dd6
implement remover_marker, jump_by_bars, and jump_by_seconds
2016-01-18 18:24:14 +01:00
5a55ac582d
mackie: shift-fader overrides group settings
2016-01-18 12:11:09 -05:00
c2bf0fc94e
remove shift-fader-touch as a way to reset gain to default
2016-01-18 12:11:09 -05:00
746d5c6624
add API to allow mackie controls to use GroupControlDisposition
2016-01-18 12:11:09 -05:00
cd401f5ab4
add new enums to libs/pbd enums registration
2016-01-18 12:11:09 -05:00
64c9198d60
add group disposition argument to Route::set_gain() and use it in various UIs
...
Executive decisions were necessary in a couple of places about the correct group disposition
behaviour, notably faderport and OSC surfaces
2016-01-18 12:11:09 -05:00
1948b50a68
working version of new gain control design
2016-01-18 12:11:08 -05:00
55094b7237
move Amp::GainControl out into its own source module and out of Amp
2016-01-18 12:11:08 -05:00
d1033819bd
change ownership of the AutomationControl used by Amp.
...
It used to be owned by Amp. Now it is owned by Amp's owner
2016-01-18 12:11:08 -05:00
19af86ece2
Mackie Control: Fix crash in multi-surface setup when add/remove tracks.
2016-01-18 08:58:07 -08:00
ef7c6730cb
Groups: Fix un/set hidden/show should reset RID for tracks involved.
2016-01-17 14:17:02 -08:00
d4aae03653
scrolling actions should not require that a track selection exists
2016-01-16 20:29:14 -06:00
7b08d650c0
Change last commit to use it's own variable rather than borrowing solo's
2016-01-16 14:40:03 -08:00
65be9fa2fa
Mackie Control: fix global Solo lamp to get signalled for listens active too.
2016-01-16 13:53:52 -08:00
23041fda88
Mackie Control: fix math error that tried to change bank to very high number
2016-01-16 11:17:52 -08:00
92dba5bfa3
Mackie Control: Added hidden tracks view mode.
2016-01-16 07:32:30 -08:00
3f76b4ec17
newer, not-as-good boost shared ptr debug patch for boost 1.55 and maybe later
2016-01-16 10:03:42 -05:00
9d65e6084c
clean up functors used in cross-thread call_slot() messages, in case they contain shared_ptr<T>, which could result in a dangling reference
2016-01-16 09:33:31 -05:00
d61cf81997
The return of threaded waveform rendering and related crashes.
2016-01-16 14:18:59 +01:00
9dfdaff1a4
Mackie Control: Need signal from session if group parameters change so strips redisplay if group un/hides.
2016-01-15 16:19:15 -08:00
b3fd65d149
Mackie Control: Don't show hidden groups either.
2016-01-15 13:58:08 -08:00
6b356448e3
Mackie Control: Don't show hidden routes.
2016-01-15 13:16:24 -08:00
d14e3ccc24
force LV2 plugin-state save for templates - #6709
2016-01-15 13:44:17 +01:00
440618b463
Add a newly introduced source file to our MSVC project (ardour_osc)
2016-01-15 11:59:43 +00:00
5f61409c90
Fix build of OSC surface caused by missing include of i18n/gettext header
2016-01-15 12:14:52 +10:00
d3ab91d171
touchOSC compat for common route operations
2016-01-15 01:31:12 +01:00
b6c78ad9c8
fix OSC debug messages
2016-01-15 01:29:44 +01:00
6a6f414fc0
OSC-debug: print argument
2016-01-15 00:57:33 +01:00
919feac5f7
use PBD instead of C++11.
2016-01-14 23:46:51 +01:00
141352341c
Generic MIDI: midi controller buttons should only trigger on the PUSH, not release. This might have to be reveisited later, but it looks right to me and it fixes operation on 2 different devices here
2016-01-14 16:39:50 -06:00
ddb362fe17
Generic MIDI: add ToggleRecEnable action, and change all maps to use that instead of separate rec-enable, rec-disable, which didnt work
2016-01-14 16:37:54 -06:00
368be3585e
OSC debugging, allow to log incoming & unhandled messages
2016-01-14 23:34:37 +01:00
0b58cde467
Mackie Control: Remove unused global_solo_* functions, moved functionality to clearsolo_* functions.
...
Changed to clear only rather than toggle and added Listen Clear as well.
2016-01-14 13:06:14 -08:00
aeaf0610d4
GUI for latency-measurement signal-level
2016-01-14 19:25:23 +01:00
f2b7d9af92
NO-OP: enums implicitly start at zero
...
this allows this file to be included to look up enums (bindings)
2016-01-14 19:10:27 +01:00
aacf086246
add API to query signal value of audio-latency measurement
2016-01-14 19:10:04 +01:00
2386410e4a
remove debug output
2016-01-14 11:00:50 -05:00
9ab92a67c8
use correct type of lock when removing a thread request buffer
2016-01-14 11:00:40 -05:00
5e4d9612e3
faderport: stop event loop when destroying object
2016-01-14 10:59:27 -05:00
35807a1929
fully clean up request buffers when a thread dies
2016-01-14 10:53:32 -05:00
077c65cc2a
manually revert 4b3043cc and 141e6fb8181; add detailed explanatory comment
2016-01-14 09:05:06 -05:00
da087e920b
ensure that each and every audioengine-related thread has a unique name
2016-01-14 09:05:06 -05:00
084af96bf4
Change handling of Midi note selection to eliminate signal emission/delays.
...
Each MidiRegionView(MRV) is connected to the Selection::ClearMidiNoteSelection
signal that is used to notify the all MRV instances to clear their note
selection.
The MRV class also has a private static SelectionCleared signal that is used to
signal other MRV instances when their selection has been cleared. When the
Selection::ClearMidiNoteSelection signal is emitted it causes each MRV to also
emit the SelectionCleared signal. So the emission takes quadratic time.
With 1500 MRV instances emission takes about 2.2 seconds on my machine, and
some operations like track selection cause it to be emitted 3 times(another
issue).
The Selection class in the Editor knows which MRV instances have note
selections, as it is notified by MidiRegionView whenever the selection count
becomes zero or becomes non-zero. Clearing the Note selection should then just
be O(N) and direct calls can be used rather than signals.
This change removes both the signals and uses the existing references between
Selection and MRV class to control note selection. There should be no
behavioural changes in Midi note selection with this change.
2016-01-14 20:41:44 +10:00
b93a9e2601
Add debug bit for selection debugging output
2016-01-14 20:41:43 +10:00
141e6fb818
don't pick up already dead thread request buffers when setting up an event loop
2016-01-13 23:25:17 -05:00
4b3043ccda
use a unique key to store per-thread request buffers
2016-01-13 23:00:02 -05:00
