90275ded6a
faderport: a clever hack to make the Shift modifier "sticky"
...
The user can now press+release Shift, then another key OR press Shift, then another key before releasing Shift. Both
event sequences will have the same result
2015-12-02 17:40:58 -05:00
ba02c171f1
add session safeguards to OSC callbacks
2015-12-02 22:40:36 +01:00
Johannes Mueller
f11e18555e
Cleanup to make it coding style compliant.
2015-12-02 22:38:29 +01:00
Johannes Mueller
4a429fab0e
Add support to signal the transport state by OSC
...
Implement transport_speed in the same style like transport_frame. Up to
now transport_speed and record_enabled are implemented.
2015-12-02 22:38:29 +01:00
aaebeb3d2b
fix typo in variable name
2015-12-02 00:59:32 +01:00
0544e74fdf
merge from mixbus branch.
...
keep control surfaces special cases upstream.
2015-12-02 00:55:01 +01:00
b0fe298f72
faderport: factor out encoder divider into a const double
2015-12-01 18:47:29 -05:00
ee9524c9b6
faderport: make punch button LED indicate punch status
2015-12-01 18:45:43 -05:00
fd44adfe01
faderport: change panning dividers to give full range across very roughly 270 degrees of rotation
2015-12-01 18:32:55 -05:00
cb965cba16
start tweaks to make Shift sticky; remove Shift-press combobox from gui since we don't allow that to be bound (next-marker)
2015-12-01 16:19:16 -05:00
37961a6bbe
faderport: switch long-press mechanism to a timeout
...
This makes the long press action fire after the timeout even if the user is still holding the button,
which feels more satisfactory
2015-12-01 13:15:38 -05:00
03a4926790
faderport: allow User button to be bound to ANY possible action.
...
This does involve nagivating some really gnarly menus, which is unfortunate, but we don't have a good general
solution for this yet (it is fundamentally the same problem that affects the key binding editor and Mackie support
2015-12-01 11:20:09 -05:00
0e629cd162
faderport: add punch action
2015-12-01 10:35:37 -05:00
0c9fd363ca
faderport: GUI tweaks
2015-12-01 10:35:37 -05:00
daf02e8c73
remove "medium-length" press concept from faderport code and GUI
2015-12-01 09:23:08 -05:00
620f1caf23
faderport: stick a nice little image of the faderport in the surface GUI
...
Ideally, the PNG file would be part of the surface GUI but for now just put the PNG into gtk2_ardour/icons
2015-12-01 09:23:08 -05:00
254c1e2c91
faderport: correctly restore mix/proj/trns state from XML
2015-11-30 20:54:23 -05:00
41d0336f80
faderport: cleanup
2015-11-30 20:34:51 -05:00
f1dd53e37a
faderport: add some "curated" actions for mix, proj and trns; make new bindings use release, not press
2015-11-30 15:05:30 -05:00
b8ed62453f
faderport: restore button actions, and correctly indicate current action in GUI
2015-11-30 13:50:33 -05:00
682e152aaf
faderport: some code cleanups, add timing for button presses, add new comboboxes to GUI to allow more button programming, save button state
2015-11-30 12:51:18 -05:00
149f6795bb
no-op: add comment to faderport button ID definitions
2015-11-29 11:58:36 -05:00
73d1de3b75
NOOP, remove trailing whitespace, replace tabs in python scripts
2015-11-29 17:54:31 +01:00
c6dfb947eb
faderport: add two functioning actions for the mix button
2015-11-29 11:43:14 -05:00
6380403dad
basic structure for Faderport GUI
...
Not fully functional (or sensible yet) but the pieces are all there
2015-11-29 11:33:23 -05:00
bbaa5c6f45
faderport: shift+encoder controls pan width (for ardour only), input trim now controlled by user+encoder.
...
User is now a modifier key
2015-11-27 16:41:26 -05:00
779ec041b5
faderport: basic panning via encoder knob.
...
Doesn't help with 2=>2 panner, where width control is also required
2015-11-27 16:34:01 -05:00
b842495be0
fadeport: make fader touch work
2015-11-27 10:22:01 -05:00
3893f62657
Mackie Control: Disable Selected group in User/Selected view mode to allow individual adjustment.
2015-11-26 06:55:25 -08:00
d138f8981d
implement more Faderport buttons (window and fader automation). ToDo: automation LEDs, fader banking
2015-11-25 17:33:49 -06:00
d6186fba32
use human readable port-names in Mackie config.
2015-11-26 00:30:52 +01:00
e1794ae678
faderport: simpler logic for master/monitor/other
...
When choosing master or monitor, do NOT save master or monitor as the pre_{master,monitor}_route under
any circumstances. This means that master/monitor choices do not stack, and just switch between them.
2015-11-25 17:56:22 -05:00
e1ea14f10a
faderport: handle mute for monitor out by using monitor processor ops; try to blink mute button when cut-all is in effect.
...
Still some logic bugs when switching between master, monitor and other
2015-11-25 17:20:00 -05:00
9cbab4070f
faderport: fix odd interaction when selecting master-then-monitor or monitor-then-master and toggling back
2015-11-25 16:55:14 -05:00
1450fc07c1
faderport: fix odd interaction when selecting master-then-monitor or monitor-then-master and toggling back
2015-11-25 16:51:53 -05:00
d53993fd83
faderport: output button is a toggle between master (or monitor) and currently used route
2015-11-25 16:47:20 -05:00
104ec39b50
faderport: enable "Output" button to select master out (or, with Shift, monitor out if it exists) as the target route
2015-11-25 16:34:11 -05:00
487ada6630
handle encoder changes. shift+knob = input trim. ToDo: panner control
2015-11-25 14:52:58 -06:00
4e014da61a
cruft removal from faderport code
2015-11-25 13:37:00 -05:00
dd6cbac20e
faderport: implement fader support
2015-11-25 13:37:00 -05:00
fe06e3b7e8
faderport: track GUI selection, use first selected route; implement mute, solo, rec
2015-11-25 12:38:22 -05:00
68da5a1402
faderport: put back the working version of operations.cc
2015-11-25 07:35:50 -05:00
3ded5fc3f6
stub file to enable nightly builds
2015-11-24 23:37:49 -06:00
000b11dc4d
faderport: more global button functions added
2015-11-24 23:41:10 -05:00
2e3721ecf4
add goto_zero() function for BasicUI
2015-11-24 23:40:54 -05:00
7ae380c7f6
faderport: more interesting behaviour for the play button (locate to last start if pressed while rolling, then keep rolling)
2015-11-24 23:31:29 -05:00
9c64d63ebb
clarify a DEBUG_TRACE remark
2015-11-24 23:29:03 -05:00
e7a3a5ab9c
faderport: make loop, prev marker, next marker and marker buttons do stuff
2015-11-24 23:27:55 -05:00
35577f439d
add debug "bits" for FaderPort
2015-11-24 23:20:39 -05:00
2ea4d5c7b5
faderport: allow forcing LED state for use in ::all_lights_out()
2015-11-24 23:13:02 -05:00
34d847e060
faderport: fix modifiers for rewind, stop, undo etc ; listen to session transport signals and display state with button LEDs; add blinking
2015-11-24 23:06:19 -05:00
3a86b386fa
fadeport: restructure button info actions to allow modifiers (shift, rewind, stop) and set up undo and shift-undo (redo)
2015-11-24 22:32:40 -05:00
7c8cc3cfa9
give the faderport its own thread and event loop, rather than riding on the back of the MIDI UI thread in libardour
2015-11-24 21:41:44 -05:00
8765359db2
faderport: after connecting, turn off all lights, then party with them, then turn them all off
2015-11-24 21:10:22 -05:00
84ebad120e
add some faderport infrastructure for button handling, and bind up the transport functions to their obvious methods
2015-11-24 21:02:18 -05:00
9106512000
namespace and filename cleanup
2015-11-24 20:12:12 -05:00
ff62cec27d
remove debugging output
2015-11-24 18:20:24 -05:00
b280301a65
create data structure to handle the fact that faderport firmware 1.38 uses different button IDs for input and output (!!!)
2015-11-24 18:20:07 -05:00
a15cf9f0b3
get faderport i/o working, basics of identifying control activity
2015-11-24 18:00:11 -05:00
2f1cdd3ffe
rough-in for faderport protocol backend
2015-11-24 14:18:14 -06:00
3c9b71b50e
allow use of (N)RPN messages in generic MIDI binding maps (UNTESTED)
2015-11-23 12:27:51 -05:00
fb96170178
Fix fader in mackie control to work with groups.
2015-11-14 10:39:53 -08:00
09672f4a50
Mackie Control: Initialize vpot assignment on start-up.
2015-11-06 19:28:24 -08:00
ace771bc91
Mackie Control: Add send functionality to vpot assign section.
2015-11-06 16:18:13 -08:00
84d44eb5a3
Don't handle possible phase change if no audio channels in mackie control
2015-11-01 19:25:45 -08:00
8ae23c6952
Fix Mackie surface phase control for flip and more than one audio channel.
2015-11-01 15:30:36 -08:00
2e9de2def0
Added Phase control mackie controls as part of the Trim (track) vpot assignment.
2015-11-01 13:35:02 -08:00
7c24957d30
Changed MCP trim detection to match method used in GUI.
2015-10-25 08:22:02 -07:00
96c6da0804
Make mackie control view mode save bank for all modes.
...
Also moved duplicated code to one function.
2015-10-22 15:30:34 -07:00
7a453d2329
Make sure Mackie Control view modes start with route 1 except Mixer mode goes to last position.
2015-10-20 19:31:04 -07:00
81f6ad0d0c
Added "Selected" view mode to Mackie Control.
2015-10-20 18:54:56 -07:00
48f91c6ef4
Add Audio Tracks and Busses too.
2015-10-18 19:55:56 -07:00
0185c9f25a
Added Midi Tracks View mode.
2015-10-18 18:13:16 -07:00
f7e3117c3b
Only display Trim for tracks that have Trim. On the way:
...
-fixed flip mode.
-fixed no controlable for vpot or fader
2015-10-18 07:38:40 -07:00
5461b50cdb
Assign Global view to get back to Mixer.
2015-10-17 16:23:46 -07:00
334cc37e1b
Reduced delay in last commit/10
2015-10-14 05:55:10 -07:00
1f85691870
fix MCP ports hang on device change and multi-surface device reconnect.
2015-10-13 22:19:36 -07:00
53a28c230a
mackie support omnibus patch
...
Fixes all kinds of miscellaneous issues with MCP. Also removes several theoretical pan modes, replace "Tracks"
pan mode with "Trim", and takes a tiny step towards view modes
2015-10-13 15:34:53 -04:00
0043dc38a3
introduce separate-meters concept for Mackie.
...
Devices like the SSL Nucleus have meters displayed separately from their 55x2 display
2015-10-13 10:04:58 -04:00
3169ac0444
fix the design of Mackie XML state management
2015-10-13 07:33:27 -04:00
fbdb4c602e
more corrections for mackie GUI layout
2015-10-13 07:33:27 -04:00
ef08cd6e4a
move incorrectly packed touch sensitivity slider for Mackie GUI
2015-10-13 07:33:27 -04:00
8e83ca5753
Only flip if not already in desired state. Fixes fader jerk on banking.
2015-10-12 13:52:10 -07:00
1eb1391cfd
expose terminal, rather than just physical, MIDI ports in Mackie GUI
2015-10-12 14:42:49 -04:00
d4e0e8e963
make MCP port buttons work
2015-10-12 13:36:22 -04:00
79113144ef
Correct wrong value on LCD strip when fader is touched (fixs #6619 from Petr Vejsada)
2015-10-11 23:24:14 -07:00
796e404819
Don't use old session connections on MCP device change, Solves crash on device change.
2015-10-11 22:27:13 -07:00
104f43ad37
Fix MCP extension number and get master on right surface.
2015-10-11 21:37:04 -07:00
f8875df18f
Several changes to Mackie support. Breaks existing Mackie state on disk but not
...
in any way that causes problems, just loss of pre-existing connectivity.
1. retain state of current device (and serialize to disk) when switching
devices, and restore that state when switching back to it.
2. fix port and surfacenaming.
3. fix bundle assembly so that all ports (for multi-surface combos) work.
4. rationalize master position numbering
5. add small sleep before starting device handshake after reconnection. This
is ugly but seems to be necessary, unfortunately.
2015-10-11 12:01:27 -04:00
6faec91dd9
Force Flip normal before Bank ( fixes #6630 )
2015-10-10 19:59:29 -07:00
7535947eb1
Display parameter that matches mode.
2015-10-10 19:40:28 -07:00
965b135842
numerous changes to Mackie support, generally offering better robustness
2015-10-10 17:14:30 -04:00
9b5a071c33
varied and wide changes to get input and output combos closer to working
2015-10-09 14:01:22 -04:00
7e771c9fdc
move location where port handling stops during Mackie::Surface destructor
2015-10-09 11:12:28 -04:00
6acd51d48e
NOOP: whitespace/indent fix
2015-10-09 11:11:36 -04:00
03018aeefb
add TrimAutomation to list of possible pot parameters for routes
2015-10-09 11:11:15 -04:00
d700576171
remove unused and useless stuff relating to bundles inside Mackie::Strip
...
What was someone (Paul? John ?) thinking?
2015-10-09 11:10:44 -04:00
9c7139e505
set up control_by_parameter map in a Mackie::Strip so that subsequent array-syntax lookup does not crash
2015-10-09 11:09:47 -04:00
6bcbace73a
add device-info specific component to Mackie GUI to allow direct wiring of MIDI ports (non-functional)
2015-10-08 21:55:38 -04:00
8338fd8ac6
add DeviceChanged signal to MCP and make surface lock mutable for use in const methods.
...
Also add nth_surface() API to MackieControlProtocol
2015-10-08 21:55:38 -04:00
36088b53b1
add new API to access AsyncMIDIPort members of Mackie Surface port
2015-10-08 21:55:38 -04:00
bda0ba173c
for an ipMIDI surface, make the GSource used for input hold the only reference on the GUIChannel.
2015-10-08 21:55:37 -04:00
7e10c21468
make Mackie::Surface keep a reference to the input source+channel and clean up in destructor
2015-10-08 21:55:37 -04:00
33fe33f268
fix initialization sequence for ipMIDI Mackie surfaces
2015-10-08 15:28:37 -04:00
0c448c387b
fix crash when switching from regular MIDI to ipMIDI Mackie surface
2015-10-08 15:28:21 -04:00
d3efef7f5c
fix logic to reshow strip "name" after a message display
2015-10-08 14:58:28 -04:00
02181174c3
remove debugging display of message on MCP device
2015-10-08 14:51:27 -04:00
49be513bfa
fix rebase conflicts left over after pull
2015-10-08 13:40:00 -04:00
0cb1c7b58c
lots of changes to try to get the Mackie Control display be more useful and usable
2015-10-08 12:51:44 -04:00
4677d047a5
more mackie strip redisplay renames, and add a global block to redisplays\n
2015-10-08 12:51:18 -04:00
0f978a90f4
subtle rework/rename of per-strip revert-to-vpot-display code
2015-10-08 12:50:05 -04:00
4a1790b75e
remove unused per-surface button timer
2015-10-08 12:50:05 -04:00
6899bd7c15
Add Trim to Mackie controls.
2015-10-07 21:36:16 -07:00
c9658134ce
add button time and explicit bank switching to MCP support
2015-10-07 15:13:03 -04:00
ce9b271a92
track Mackie MIDI port connection status as primary trigger for handshake with device
2015-10-07 13:17:49 -04:00
2397429e99
use quotes for in-tree pbd/glib wrapper include
2015-10-05 22:15:18 +02:00
97bd6db2b7
remove i/ofstream from libardour
...
except:
* audio-unit (ifstream is known to work on OSX)
* evoral curve algorithm debugger
* cycle-timer debug code
* export_handler's CDMarker -> TODO
2015-10-05 22:15:17 +02:00
33d614359a
only use HUI heartbeat with HUI devices
2015-10-05 12:24:15 -04:00
22b07e0233
NOOP, remove trailing tabs/whitespace.
2015-10-05 16:17:49 +02:00
4dc63966f0
globally remove all trailing whitespace from ardour code base.
...
Paul Davis was responsible for introducing almost all of this.
2015-10-04 14:51:05 -04:00
cf33204e35
always use session rt-event to un/set solo
2015-10-04 02:04:59 +02:00
a333edcb28
Initialize variable every loop so MCP devices don't accumulate too.
2015-10-03 13:15:18 -07:00
4b69495f82
Initialize variable every loop so MCP profiles don't accumulate.
2015-10-03 13:06:34 -07:00
2dddf6504b
NOOP: delete trailing whitespace
2015-10-03 14:03:29 -04:00
1e5672de98
reset IP MIDI port when deleting a mackie surface port
2015-10-03 13:51:17 -04:00
9d7b5f6df9
reset shared_ptr to master surface when clearing surfaces, to ensure Surface destructor is called
2015-10-03 13:50:59 -04:00
4403ce4bd4
make a start on providing direct choice of MIDI ports where an MCP device can be reached
2015-10-03 13:13:58 -04:00
91d3aabf53
NOOP: reformat indentation
2015-10-03 13:13:58 -04:00
76398911d4
more code-control when laying out Mackie Control GUI panel
2015-10-03 13:13:58 -04:00
6bf0d4f627
add basic support for HUI heartbeat, only used for HUI devices
2015-10-03 13:13:58 -04:00
4ef45aacc1
add DeviceType specifier for mackie devices.
...
Incomplete, because we need a way to handle multiple devices of different types
2015-10-03 13:13:58 -04:00
13765d41e3
NOOP: reformat indentation
2015-10-03 13:13:58 -04:00
c8448cb0dd
add device type to Mackie device info
2015-10-03 13:13:57 -04:00
53c47e0ccd
add support to display and set key aliases in mackie GUI
2015-10-03 13:13:57 -04:00
f0c1d58f59
fix windows compilation
2015-10-03 11:20:15 +02:00
3733fd7f31
remove undefined and unused method declaration
2015-10-02 22:08:15 -04:00
0ee737f129
another change from modifier_state() to main_modifier_state()
2015-10-02 22:08:15 -04:00
c78426968f
avoid handling pitchbend (fader) messages while SHIFT modifier is active.
...
See comment in code for more detail
2015-10-02 22:08:15 -04:00
40a4e2e6af
no longer call ::zero_all() when deleting an MCP surface object.
...
The ports required may no longer exist, and it requires a lot of messages. A reset is sent instead
2015-10-02 22:08:14 -04:00
9476657cd1
use ::main_modifier_state() in some more places
2015-10-02 22:08:14 -04:00
ef6b0bdb07
necessary header changes for new redisplay code in MCP
2015-10-02 22:08:14 -04:00
4d47760d61
add new (fast) redisplay timer that pushes parameter display text to MCP device.
...
Changes are queued in a FIFO, and pulled when a timeout in the MCP event loop fires.
2015-10-02 22:08:14 -04:00
05a8107ff6
fix comment spelling
2015-10-02 22:08:14 -04:00
2cdfeda884
use Surface::reset() when deleting MackieControlProtocol, rather than sending lots of messages.
...
This may be a bit "strong" because on the MCU Pro (at least) it causes a fader recalibration.
2015-10-02 22:08:14 -04:00
ccf505c3a2
implement backlight, fader touch sensitivity and recalibrate fader functions for MCP GUI
2015-10-02 22:08:14 -04:00
04b9df1fd9
avoid sending replicated fader set position messages
2015-10-02 22:08:14 -04:00
918133a342
fix handler of fader (pitchbend) messages in Mackie Control so that the outbound messages match the inbound ones
...
Pitch bend values really can span 0 to 16384, not 16383
2015-10-02 10:22:00 -04:00
71bf231199
allow aliasing Mackie Control buttons to other buttons
2015-10-02 10:21:20 -04:00
5c63ed589c
catch changes in click status and alter LED appropriately
2015-10-02 07:32:56 -04:00
a4fced6d63
change zoom and scrub handling to use modifier bits
2015-10-02 07:32:56 -04:00
d28c8c9bb4
spelling correction in error message
2015-10-02 07:32:56 -04:00
239da0efb5
Fix Mackie control metering ( fixes #6608 ).
2015-09-28 20:13:15 -07:00
b1424dab79
Vpot assign buttons don't do anything, don't light LEDs either.
2015-09-21 10:04:06 +02:00
47976ed4fa
Make Mackie control surface LEDs for modifier keys only light while pressed. ( fixes #6601 )
2015-09-21 10:03:56 +02:00
7ac691ec82
use pbd's gstdio compatibility wrapper
2015-09-17 14:37:57 +02:00
f8912b8b57
Made master fader touch and jog go to _master_surface instead of first surface.
2015-09-08 20:47:16 -07:00
b8b6f61d6c
save/load generic-midi motorized setting - fixes #5296
2015-08-20 00:19:32 +02:00
4129b8865c
Fixed Mackie control port naming for extender use ( fixes #6500 )
2015-08-14 08:57:13 -07:00
962ba01cfd
Fixed feedback for MCP buttons and LEDs not working.
2015-08-13 13:00:04 -07:00
39240c9d37
Added end of line to debug statment
2015-08-13 09:55:32 -07:00
2a3f5d0107
Make MCP MasterPosition match MIDI port number.
2015-08-09 22:27:40 -04:00
1a51f19493
Clean up extra white space added by editor.
2015-07-27 16:17:38 -04:00
8b4a237ee3
Handle the 4 common encoder types.
2015-07-27 16:17:38 -04:00
d3b4ef4eed
Add enc to midi map for mcp style encoders.
2015-07-27 16:17:38 -04:00
ae3d4efce0
Make program change toggle or 1 only.
2015-07-27 16:17:38 -04:00
6ab04a27c3
Allow any one midi event to control only one thing.
2015-07-27 16:17:38 -04:00
b7b1f9a0a6
fix “missing operator<< for PBD::ID” (clang)
2015-07-15 01:21:19 +02:00
d8f3f9f02d
Move learned midi binding reload after midi map load ( fixes #6405 )
2015-07-13 13:47:00 -07:00
937ed39c45
fix PBD::ID string format
2015-07-11 05:17:02 +02:00
ed8ab2c80a
Fixed pb in toggle mode to switch at half way ( fixes #6424 )
2015-07-10 16:52:43 -04:00
a29b050883
Fixed generic MIDI program change event size to two bytes ( fixes #6426 )
2015-07-10 16:52:43 -04:00
6349570fb2
Add debug for generic midi control
2015-07-10 16:52:43 -04:00
2ea5962af2
rationalize save/restore of control surface "feedback" property
2015-06-24 13:46:07 -04:00
974e5dcc0c
Add option to mackie control profile editor to remove binding ( fixes #6301 )
2015-06-21 12:42:48 -04:00
7a966c81bd
Don't close OSC server sockets explicitly (the subsequent call to 'lo_server_free()' will close the socket anyway)
2015-06-09 16:25:20 +01:00
801af5df9e
Add the new (UINTSDEFINED) preprocessor directive to all out MSVC projects (just to be on the safe side)
2015-06-09 13:18:42 +01:00
f33c8aeb33
Add a new preprocessor directive (UINTSDEFINED) which is rather annoyingly needed if liblo gets built with MSVC
2015-06-09 12:09:21 +01:00
b79c5d4f1b
Add a new link library that's needed when building against the newer version of liblo (0.28)
...
(probably only needed when building with MSVC)
2015-06-09 12:06:49 +01:00
72416e9432
Don't allow user to change function of modifier buttons.
2015-06-08 17:22:34 -04:00
71ae8d2abe
Add an option in the MCP .device file to set master position ( fixes #6357 )
2015-06-04 15:07:43 -07:00
71feea97a0
Clean up mackie surface profile editor from things that don't work or match the mackie hardware ( fixes #6342 )
2015-06-04 15:02:51 -07:00
f8c4c0b5b8
Make ctl put v-pot in fine mode.
2015-06-04 14:04:46 -07:00
5e1ba50731
fix unsigned/signed math error
2015-05-27 08:57:16 -04:00
e5c3efe9a3
ensure that Mackie Control bank left/right commands always hit the same boundary (Len Ovens)
2015-05-27 07:11:15 -04:00
fb649f43ea
fix for MCP panner width - closes #6341
2015-05-24 17:56:40 +02:00
ce259edbcd
professionalize peak-meters
...
The peak meter needs to withstand various test-signals
without visual jitter (in particular 1kHz sine) regardless
of settings (period-size, sample-rate, custom fall-off).
This needs to be done in sync (and not by a random non-rt
‘smoothing’ thread).
On the downside this voids the ‘visual smoothing’ particularly
with large buffersizes - but then again exactly this “always
fall-off no matter what [the next real data will be]” is the
problem.
One the upside, there’s one less high-frequency (100Hz) thread
(Yay!) PS. it probably never worked on windows, anyway.
Only peak-meters are affected by his change.
K-meters, IEC I/II and VU were never visually smoothed.
2015-05-02 03:46:49 +02:00
1e5be9ebfd
add OSC trim control
2015-04-25 21:23:37 +02:00
4512d013eb
put all of the Mackie control surface code into the ArdourSurface namespace
2015-04-15 20:37:20 -04:00
7f659a0463
add ArdourSurface to OSC class to help reduce global namespace pollution
2015-04-15 17:21:55 -04:00
d00ab0221a
allow to set/change loop-range via OSC
2015-04-12 23:40:35 +02:00
7c146a9e22
fix OSC parameter mapping, fixes #6224
...
(ignore non control ports in numbering)
2015-04-04 03:16:53 +02:00
2a9d7286f9
fix AWOL semicolon in 9f842f3
2015-03-20 22:08:17 +01:00
9f842f3247
NOOP, whitespace
2015-03-20 21:38:26 +01:00
410cf8e79d
OSC log errors
2015-03-20 21:32:56 +01:00
7619edd1f6
OSC: fix crash when trying to set output params
2015-03-20 21:19:25 +01:00
17e1e2641b
OSC fix plugin numbering:
...
ignore non-plugin processors for OSC
/ardour/routes/plugin/parameter
fixes issue with hidden internal processors. (rec-en
track adds a hidden [meter] processor at the top,
internal returns on busses have returns etc.)
2015-03-20 20:27:15 +01:00
40c04867ef
Bundle API user update
...
cherry-pickable follow up to 0582221
2015-03-08 22:39:34 +01:00
8a93a87db0
remove lib versioning for internal plugins
...
Those objects do not have a versioned API by themselves.
This fixes issues with duplicate deployment (OSX, Linux bundles: cp) and
ardour listing control-surfaces multiple times (file index plugin dir).
2015-02-16 17:32:56 +01:00
95091a52a0
When building with MSVC make sure any backends / panners etc get copied to the correct target folder
...
(i.e. 'lib/ardour3' or 'lib/mixbus3' as appropriate)
These changes are MSVC specific and shouldn't affect the other builds
2015-01-12 14:43:22 +00:00
dafcaec023
Limit Wiimote surface discovery to 5 connection attempts
...
If you don't connect a Wiimote then the connection attempts were
endless.
2014-12-21 12:53:00 +07:00
0fdb846625
try alternate Glib:: API for conversion from UTF-8 to ascii in Mackie support code
2014-12-15 15:06:10 -05:00
e3f376107e
nominal fix for sending UTF-8 text to Mackie surface
2014-12-15 14:44:05 -05:00
602e390649
changes to Mackie Control support for new crossthreadchannel implementation
2014-12-03 21:22:34 -05:00
d3e2de8b4e
modify Mackie surface code to use crossthreadchannel on all platforms
2014-12-03 20:57:58 -05:00
25e1eddc50
remove "port sources" management from MidiControlUI and Mackie support.
...
This was necessary due to a bug/design issue between Glibmm and Glib (see https://bugzilla.gnome.org/show_bug.cgi?id=561885 )
but the problem needs to be managed by the *creator* of the IOSource and that has now moved inside CrossThreadChannel.
2014-11-26 18:22:22 +02:00
1f58f81aa6
Fix order of parameters to stop_touch() in Mackie::Control
...
Reverse the parameters of Mackie::Control::stop_touch() to make them
consistent with AutomationControl::stop_touch(), and fix up the call to
AutomationControl::stop_touch() to have the parameters in the correct
order.
Unfortunately, I don't possess any devices that speak the Mackie protocol, so
though the patch seems logical and correct to me, I have no way of testing it.
If anyone has a device with touch faders that speaks Mackie, I'd be glad of any
confirmation that it at least doesn't break anything.
2014-11-25 14:59:48 +00:00
ea5876b836
Remove dead code.
2014-11-25 02:11:44 -05:00
bfe49540b9
remove use of CrossThreadChannel::selectable() to allow cross-platform implementation of CrossThreadChannel via Glib::IOSource
2014-11-23 17:37:13 +02:00
7204702c3f
Reduce coupling between Plugin and PluginInsert.
2014-11-03 13:40:50 -05:00
6dfb11c2d0
Move ParameterDescriptor from Plugin to its own header.
...
This fixes circular dependency issues that arise when using ParameterDescriptor more widely.
2014-11-02 02:10:24 -05:00
973d40e3ac
Add support for USE_CAIRO_IMAGE_SURFACE when building with MSVC
...
(new preprocessor directive - greatly improves CPU loading)
2014-10-29 17:36:30 +00:00
2f4a8cf693
avoid const cast warning
2014-10-24 12:18:46 -04:00
d8e64103a6
fix CPI window handling:
...
Move control-surface editor-window management to the control surface.
The Preferences-Dialog is not aware of session specific or surface
specific actions and cannot properly manage the window.
2014-09-13 16:59:02 +02:00
65715dd298
Make sure all our VC projects agree that the product is called 'Mixbus3' (as opposed to just 'Mixbus')
...
It'd be nice if we could use 'ARDOUR::config_dir_name' for this purpose (or perhaps 'PROGRAM_VERSION'). However, neither is implemented widely enough at present to make this practical. Keep an eye on them though, as possible future strategies.
2014-08-28 07:57:20 +01:00
45afed5e9a
Modify our VC project files to work with msvc32-fixup.pl
2014-08-04 09:02:17 +01:00
576f39d6a0
Add the MSVC project file for building libs/surfaces/osc
2014-07-27 11:26:41 +01:00
7984cd2321
Changes needed for building surfaces/osc (control surface protocol) with MSVC
...
(for testing on the non-Windows platforms)
2014-07-22 22:19:46 +01:00
928881b24a
Update vcproj files for changed LILV config define.
2014-07-15 15:50:12 -04:00
cd12698b9c
Rename PBD::find_file_in_search_path to just PBD::find_file
...
saves a bit of typing and not necessary if you look at how it is used.
2014-06-25 12:40:10 -04:00
d9a7d419b2
Change PBD::find_files_matching_regex and PBD::find_files_matching_filter to take a Searchpath
2014-06-25 12:40:10 -04:00
547689a055
Replace all use of PathScanner with equivalent functions from pbd/file_utils.h
2014-06-17 21:41:29 +10:00
0e96d84079
Change PBD::PathScanner API to return results by value to avoid inadvertent memory leaks
2014-06-17 21:13:05 +10:00
12cf9d5be8
fix pathscanner / stl_vector related memory leaks
2014-06-15 13:24:39 +02:00
8c9749e42f
merge with master and fix 4 conflicts by hand
2014-06-02 11:32:13 -04:00
f3349a797c
more gettimeofday() -> g_get_monotonic_time()
2014-05-16 19:58:46 +02:00
5fba8a2015
and one more gettimeofday() transition (mackie timers)
2014-05-16 18:35:42 +02:00
1b989a93c2
remove redundant os.path.join() calls when specifying install path as bld.env['LIBDIR']
2014-04-28 21:18:02 -04:00
058986f77b
finish unfinished work at basing all install paths on the program name
2014-04-28 21:11:08 -04:00
8a4fdbf023
final eradication of jack header files from anything except the JACK backend
2014-04-11 02:52:28 -04:00
077a194430
Add the main VC project files for building Ardour3 with Microsoft Visual Studio
...
Note that there's no 'VS Solution' file at present and some targets haven't been built yet (e.g. 'fst')
2014-04-08 09:49:35 +01:00
af0c42ec4f
midi-controller, support log parameters - fixes #5890
2014-03-23 18:59:24 +01:00
495c0de4ac
fix up waf build in wake of search path changes earlier today
2014-03-10 17:30:12 -04:00
912f07b919
mingw build fixes (tested with i686-w64-mingw32 on linux-x86_64)
2014-03-04 15:25:58 +01:00
e6c3cece64
remove recently added conflation of mingw64 and msvc with respect to symbol export
2014-03-02 14:59:08 -05:00
03fd396286
fix a related-to-last-commit problem in build script for OSC support
...
This would have had the effect of hiding -DPACKAGE="ardour_osc" but since there is no i18n stuff in our OSC support,
it really had no effect.
2014-03-01 16:58:22 -05:00
19395ac258
when mingw is mingw64, it appears that we need to use __declspec() and not __attribute__((visibility)) for export control
2014-03-01 15:16:39 -05:00
80d83fd238
add a hack to deal with device discovery race, in which the devices were not actually known to be ready before the last update_surfaces() call (which is where binding between strips and routes occurs) ; add support for Mackie Control touch on/off messages
2014-02-19 23:25:08 -05:00
29b3c299a1
add a hack to deal with device discovery race, in which the devices were not actually known to be ready before the last update_surfaces() call (which is where binding between strips and routes occurs) ; add support for Mackie Control touch on/off messages
2014-02-19 13:22:52 -05:00
79b7fb82f3
try to get export/visibility and build conditionals right for surfaces/, once more
2014-01-25 13:57:28 -05:00
065e1e6334
alter surfaces build wscript to use "children" idea (like top level wscript)
...
Still not clear why this file requires the global keyword to make children global, but the toplevel wscript does not.
2014-01-23 13:39:43 -05:00
d16edb530e
fix up obj.defines for generic MIDI wscript
2014-01-23 13:38:45 -05:00
9d01082243
mackie code does not use poll(2) and so does not need poll.h
2014-01-23 13:38:23 -05:00
8eed05be54
use correct export/visibility macros
2014-01-23 13:37:28 -05:00
37b1f5017e
merge with master
2014-01-14 21:13:21 -05:00
35c170937d
NOOP, semantic update, don't pannable's panner for direct access.
2014-01-15 02:51:53 +01:00
5062a00c7d
move -fvisibility=hidden to the top of the source tree, and remove its internal use; use libtimecode as a shared lib again
2014-01-12 15:40:47 -05:00
3020b224fa
Merge windows+cc branch into cairocanvas branch. Not finished, need to now merge windows branch to get changes from there
2014-01-10 16:07:57 -05:00
897fbdc652
Small patch to see if Ben's build problem gets fixed
2014-01-05 15:08:38 +00:00
b0e4f81eb3
merge exportvis branch into cairocanvas, to reduce the number of "floating" branches.
...
Still need to add API export/visibility macros for the canvas library.
2013-12-27 14:29:06 -05:00
84f55440a3
fix redrawing of canvas with an optimized build
...
Best guess right now is that optimization does something bad when ceil() is called twice on a very large dbl-precision number,
which results in a zero (empty) redraw area. Without the removal of the redundant ceil & floor functions, no expose events
would be delivered to the canvas in an optimized build during drags (and maybe more).
2013-12-23 15:35:49 -05:00
