af1028bd90
mackie: make marker button work as Mackie intends it (as a modifier for rewind/ffwd)
2016-01-31 11:01:41 -05:00
2b56dc17e3
mackie: add "clean" method to invoke GUI actions from button events, in code
2016-01-31 11:00:16 -05:00
ef793d3762
mackie: shift-stop additionally requests MIDI Panic, as well as regular stop
2016-01-31 09:11:43 -05:00
e622f3e5b6
Mackie protocol: Fix stuck-on Read LED.
2016-01-30 21:38:18 -06:00
9115a2c5d2
Surfaces with separate meters should meter even when stopped.
2016-01-30 09:46:37 -06:00
f762cbff35
mackie: remove mention of "blinkers" concept
2016-01-29 18:40:56 -05:00
d5a8825ce8
mackie: basically (fully?) operation fader automatio control for first selected route
2016-01-29 18:37:03 -05:00
da35f58218
mackie: initial attempt at making automation-related buttons set fader automation state for selected routes
2016-01-29 16:29:52 -05:00
9fe4b7a92a
mackie: if a subview mode is not OK because there's no selection, show no message
2016-01-29 16:15:41 -05:00
4a6724868d
NOOP: change brace placement to avoid confusing emacs
2016-01-29 16:15:41 -05:00
42fbb96674
mackie: make group button (appear) to do something
2016-01-29 16:15:41 -05:00
9088944db2
Mackie protocol: More LED indicator fixes.
2016-01-29 14:26:08 -06:00
39a61dba83
mixbus: vpot press in non-subview mode should toggle master bus send
2016-01-29 12:58:50 -05:00
c6ea3515d1
mackie: in Sends subview mode, the enable control for the send should be looked upin the subview route, not the strip's own route
2016-01-29 12:41:50 -05:00
4b70a0aa0d
Button::AudioInstruments should not be lit without good reason.
2016-01-29 11:28:15 -06:00
0a2377e9b4
mackie: redesign display logic entirely
...
Strips now maintain a pair of pending display strings (upper and lower).
A periodic timeout writes the pending value to the actual hardware if it
differs from the current string. This new design makes it easy to put a
message on the display and then after some period of time, revert to
whatever was there before.
2016-01-29 12:27:46 -05:00
8aaa027ed3
mackie: fix Global View button function
...
Bug introduced changing logic for set_view_mode()
2016-01-28 23:20:03 -05:00
d0668e5511
mackie: don't overload "Audio Instruments" and "Instruments" buttons.
...
With the MCU Pro, the button labelled "Instruments" uses the Dyn button ID.
The one labelled "Audio Instruments" does not.
This may break Nucleus support - needs to be checked
2016-01-28 23:05:28 -05:00
e862be7300
mackie: use Route::send_name() rather than Route::nth_send()
2016-01-28 23:05:28 -05:00
f1ed01b97f
mackie: fix display of send level value
2016-01-28 23:05:28 -05:00
cf558ee18c
Buses and Auxes are slightly different view-filters in Mixbus
2016-01-28 17:21:42 -06:00
54c3c9e494
prevent bank/channel switching past the end of the available routes; do nothing when a view mode finds no matching routes
2016-01-28 16:27:33 -05:00
ea895efb97
mackie: improvements to display when switching subview modes
2016-01-28 15:08:26 -05:00
d19b1b64b1
make Send button light appropriately
2016-01-28 15:08:25 -05:00
3332633d19
Editing from a control surface must have the ability to ignore mouse location.
...
Add mark_in and mark_out actions that explicitly use the playhead as the edit location.
2016-01-28 13:46:33 -06:00
420206705d
mackie: fix subview mode logic
2016-01-27 19:05:47 -05:00
e63c805fe2
mackie: clean up (some) interactions between subview mode and selection
...
Also, stop Plugin button from doing anything, since it has nothing to do yet
2016-01-27 19:00:27 -05:00
c61e5dbc18
remove debug output
2016-01-27 16:26:50 -05:00
66686a4e2a
mackie: semi-working Sends subview mode
2016-01-27 14:15:41 -05:00
9b2af90328
remove mackie send pot mode (subview mode for sends coming up)
2016-01-27 12:41:01 -05:00
90d12b6d5a
faderport: add a few more sensible actions to the footswitch options
2016-01-25 15:11:47 -05:00
b02b6cc3cd
faderport: add footswitch combos to GUI to allow user control over what the switch does
2016-01-25 15:11:36 -05:00
5b7fa0b3c5
faderport: add footswitch button
2016-01-25 15:11:26 -05:00
2005891d40
use route gain control, not amp->gain()
2016-01-25 11:48:43 -05:00
9e5b7db89f
first compiling, mostly working version of group controls changes
2016-01-22 11:58:31 -05:00
79f0a92818
Add a link library that's now needed when building ardour_cp
...
Now needs 'Timecode::BBT_Time' (from Ardour's 'timecode' lib).
2016-01-22 12:28:01 +00:00
a7141e1fc3
Transport_play should not jump back.
...
Typical use of transport controls is to ffwd and rewind, then "play".
This doesn't work well if the Play command always resets to starting position.
2016-01-19 14:00:51 -06:00
5493e20c84
Add all_tracks_rec actions
2016-01-19 14:00:03 -06:00
fe7aac8dac
mackie: remove unnecessary connection to route group property change signal
2016-01-19 14:25:48 -05:00
fe3d85b204
Revert "mackie: still respond to route groups visibility changes"
...
This reverts commit a9ec547457
2016-01-19 14:16:49 -05:00
a9ec547457
mackie: still respond to route groups visibility changes
2016-01-19 13:38:29 -05:00
22c5cb47f7
mackie: remove changes to group activation status when fetching routes to display
...
This creates an activation loop, because we fetch new routes to display when
group active status is changed. This was done to provide individual access to
routes that are in a group. We plan to do this using a shift modifier instead.
2016-01-19 12:46:08 -05:00
ce7f7e8e00
add 10sec zoom action
2016-01-18 18:24:14 +01:00
c5b93e2a01
track scrolling and zooming
2016-01-18 18:24:14 +01:00
27d82af077
add some horz and vert zoom actions; remove some whitespace from the code of the ui-actions, so they are easier to see and maintain
2016-01-18 18:24:14 +01:00
16623b1cb3
add more remote transport toggles for touchOSC: midi_panic, toggle_roll, stop_forget, set_X_range, quick snapshots. also add boilerplate for monitor controls, but those are not implemented yet
2016-01-18 18:24:14 +01:00
36e1ff48bc
implement mark_in, mark_out, toggle_click
2016-01-18 18:24:14 +01:00
f0d9295dd6
implement remover_marker, jump_by_bars, and jump_by_seconds
2016-01-18 18:24:14 +01:00
5a55ac582d
mackie: shift-fader overrides group settings
2016-01-18 12:11:09 -05:00
c2bf0fc94e
remove shift-fader-touch as a way to reset gain to default
2016-01-18 12:11:09 -05:00
746d5c6624
add API to allow mackie controls to use GroupControlDisposition
2016-01-18 12:11:09 -05:00
64c9198d60
add group disposition argument to Route::set_gain() and use it in various UIs
...
Executive decisions were necessary in a couple of places about the correct group disposition
behaviour, notably faderport and OSC surfaces
2016-01-18 12:11:09 -05:00
1948b50a68
working version of new gain control design
2016-01-18 12:11:08 -05:00
55094b7237
move Amp::GainControl out into its own source module and out of Amp
2016-01-18 12:11:08 -05:00
19af86ece2
Mackie Control: Fix crash in multi-surface setup when add/remove tracks.
2016-01-18 08:58:07 -08:00
ef7c6730cb
Groups: Fix un/set hidden/show should reset RID for tracks involved.
2016-01-17 14:17:02 -08:00
23041fda88
Mackie Control: fix math error that tried to change bank to very high number
2016-01-16 11:17:52 -08:00
92dba5bfa3
Mackie Control: Added hidden tracks view mode.
2016-01-16 07:32:30 -08:00
9dfdaff1a4
Mackie Control: Need signal from session if group parameters change so strips redisplay if group un/hides.
2016-01-15 16:19:15 -08:00
b3fd65d149
Mackie Control: Don't show hidden groups either.
2016-01-15 13:58:08 -08:00
6b356448e3
Mackie Control: Don't show hidden routes.
2016-01-15 13:16:24 -08:00
440618b463
Add a newly introduced source file to our MSVC project (ardour_osc)
2016-01-15 11:59:43 +00:00
5f61409c90
Fix build of OSC surface caused by missing include of i18n/gettext header
2016-01-15 12:14:52 +10:00
d3ab91d171
touchOSC compat for common route operations
2016-01-15 01:31:12 +01:00
b6c78ad9c8
fix OSC debug messages
2016-01-15 01:29:44 +01:00
6a6f414fc0
OSC-debug: print argument
2016-01-15 00:57:33 +01:00
919feac5f7
use PBD instead of C++11.
2016-01-14 23:46:51 +01:00
141352341c
Generic MIDI: midi controller buttons should only trigger on the PUSH, not release. This might have to be reveisited later, but it looks right to me and it fixes operation on 2 different devices here
2016-01-14 16:39:50 -06:00
ddb362fe17
Generic MIDI: add ToggleRecEnable action, and change all maps to use that instead of separate rec-enable, rec-disable, which didnt work
2016-01-14 16:37:54 -06:00
368be3585e
OSC debugging, allow to log incoming & unhandled messages
2016-01-14 23:34:37 +01:00
0b58cde467
Mackie Control: Remove unused global_solo_* functions, moved functionality to clearsolo_* functions.
...
Changed to clear only rather than toggle and added Listen Clear as well.
2016-01-14 13:06:14 -08:00
5e4d9612e3
faderport: stop event loop when destroying object
2016-01-14 10:59:27 -05:00
b81504581b
another DEBUG_TRACE for mackie control x-thread requests
2016-01-12 23:30:14 -05:00
7cbf35a3d6
Mackie Control, Fix sends after monitor not showing.
2016-01-12 08:15:57 -08:00
d134ba037d
fix compilation of debug builds
...
ArdourSurface::FaderPort::Button::name is private
2016-01-11 11:07:09 +01:00
530dd4255c
faderport: remove wierd shift use design; make user+shift work again
2016-01-10 23:32:21 -05:00
58edc83d11
tweak/add faderport debug messages
2016-01-07 16:42:57 -05:00
b456060388
OSC API update for surfaces that always send float parameters.
2016-01-04 18:18:13 +01:00
d7078df3eb
amend 9e3299f for Mixbus
2016-01-03 20:39:47 +01:00
9e3299f97d
change Controllable::set_value() API to include grouped control consideration.
...
This also removes Route::group_gain_control() and associated machinery.
Not yet tested with Mackie or other surfaces. More work to done to
start using the group capabilities, and also potentially to add
or derive more controls as RouteAutomationControls
2016-01-02 04:58:30 -05:00
b8bb3eae47
generic MIDI support does not have its own request buffer factory, so be sure to initialize descriptor member to null
2015-12-29 05:41:59 -05:00
e2f6c59639
add required request buffer factory for Wiimote
2015-12-28 11:13:04 -05:00
0d9efc1148
redesign cross-thread registration/signalling system
...
This new design will work even when threads that need to receive
messages from RT threads are created *after* the RT threads. The
existing design would fail because the RT thread(s) would never
be known the later created threads, and so signals emitted by the
RT thread and causing call_slot() in the receiver would end up
being enqueued using a lock-protected list. The new design ensures
that communication always uses a lock-free FIFO instead
2015-12-28 10:14:17 -05:00
85e12e8095
Mackie control: non-existent controls zero pot ring fix.
2015-12-19 11:50:13 -08:00
07e4377d7b
NoOp: removed spaces, replaced with tabs.
2015-12-16 20:41:50 -08:00
82f31fe624
Mackie Control: Re-enable view_mode display and make sure all text vanishes after timeout.
2015-12-16 14:38:21 -08:00
8bb4ac0ac7
Fix MCP time display sometimes doesn't update to zero time on return to zero (shift-rew)
2015-12-16 12:24:10 -08:00
2f86d1b7dd
properly namespace hacked OSC callbacks, add some notes.
2015-12-16 18:17:38 +01:00
13d704b25d
redundant OSC commands to support TouchOSC and Lemur (vestigial float args)
2015-12-16 10:29:49 -06:00
bff1fcbe48
mackie: restore access to trim and pan width control
...
Change from Evoral::Parameter to AutomationType caused this glitch
2015-12-16 11:05:40 -05:00
3b872fb207
fix some merge issues from cherry-picking mackie changes from a mixbus repo
2015-12-16 06:31:06 -05:00
93d5fe83c8
mackie: properly track lifetime of subview route; fix subview/potmode LED state mgmt
2015-12-16 06:01:55 -05:00
a9a4cfb166
mackie: track compressor mode changes in display
2015-12-16 06:01:47 -05:00
1152bf87a2
make vselect-press in subview mode act as a toggle for toggled controls
2015-12-16 06:01:38 -05:00
a6da818bc4
add dynamics support to mackie control
2015-12-16 06:01:29 -05:00
e3d0de3bf6
mackie: use new route API for universal access to pan/eq/dynamics parameters to provide panning and EQ control
2015-12-16 06:01:20 -05:00
81179389d3
mackie: cleanup subview mode a little
2015-12-16 05:55:10 -05:00
8ba8f1c0b0
fix cherry-pick conflict
2015-12-16 05:54:43 -05:00
e302ce8662
only use 1/100th gap between markers if transport is stopped, to prevent repeated user action from adding multiple markers when stopped (mackie version)
2015-12-16 05:52:47 -05:00
a1ef99b9b7
add beginnings of EQ and dynamics control to mackie for mixbus
2015-12-16 05:52:36 -05:00
