84804f7d90
cont'd FP8 tweaks
...
* include Mixbus PRE plugin on Mixbusses
* Mixbus master-assign on right-most "S" button
* fix parameter-banking and assignment
* fix typo in 029e963fb
2017-04-17 20:06:00 +02:00
029e963fb5
FP8: limit fader range
...
In case of VCA masters or otherwise the value can exceed the max
+6dB and internal_to_interface() returns a value > 1.0 which cannot
be represented on the physical fader (MIDI &0x7f wraps)
2017-04-16 23:48:06 +02:00
55cd96df8d
Clean up after generic MIDI surface -- #7311
...
When there are some non-released MIDIControllables, signal are still
delivered to the objects, even if there's no surface thread to handle
the signals anymore.
2017-04-16 19:06:17 +02:00
67f2e4b866
FP8: add metronome level reset
2017-04-16 17:18:23 +02:00
8a3d9317bd
FaderPort8 details:
...
* make shift buttons equivalent
* 2 x stop: move to session-start
* RTZ: return to zero (not session-start)
* in Pan mode: encoder controls pan-width (w/o shift)
2017-04-15 21:20:51 +02:00
18dcd4d7ff
FP8: Configuration UI layout & design (add image, separators)
2017-04-15 15:19:58 +02:00
60c12df517
Fondle Port 8
...
* only start touch on parameters in "Touch" mode.
* fix "mute clear" (also affect mute-automation in touch)
2017-04-14 23:03:31 +02:00
74c8ba5c9a
FP8: assign toggled plugin-parameters to buttons
2017-04-14 23:03:31 +02:00
7197231f4c
FP8: Allow binding "Select" to a controllable or functor
2017-04-14 23:03:31 +02:00
43d9feabd3
cont'd FP8 refinement & details
...
* Access pan-width via shift, press encoder to reset
* Add "touch-start" to encoder events
* Show plugin-param value-bar
* Sends & well-known ctrls: follow strip-selection
* map "select" to strip-selection in Sends-mode
* Fader group override (via shift)
* Prev/Next button tweaks.
* consistent enum naming ...
2017-04-14 19:56:42 +02:00
d43a23fe28
Faderport8 control surface support
2017-04-13 21:21:59 +02:00
d64ca9be08
Properly expose "well known" comp_redux output.
2017-04-12 21:14:50 +02:00
6b8be8fa71
Fix set-*-from-edit-range actions, when accessed from control surfaces.
2017-04-01 09:57:06 -05:00
eb1bd9d8e2
OSC: don't skip when deleting cue observers
2017-03-29 16:24:43 -07:00
8de580c123
OSC: Clear devices should clear cue observers as well.
2017-03-29 16:07:21 -07:00
e7ca514887
OSC: reduce feedback noise for surfaces using /strip/list
2017-03-26 21:16:45 -07:00
f5931457fb
OSC: tell surfaces using /strip/list they need to rebuild after strip add/remove
2017-03-24 14:05:39 -07:00
011c4a05d8
OSC: update /strip/list response to add aux, midi bus and VCAs
2017-03-24 13:07:03 -07:00
f69808b372
BasicUI moved toggle_click,toggle_roll and stop_forget from menu action to session calls
2017-03-19 23:09:45 -07:00
7d41e542fe
OSC: add feedback for /monitor/mute,dim,mono
2017-03-19 08:54:58 -07:00
1af7e97fd0
basic_ui send midi_panic directly to session rather than through GUI
2017-03-19 07:27:24 -07:00
b0e5ab1b81
OSC add /monitor/mute,dim,mono
2017-03-18 20:05:04 -07:00
caae0546a7
OSC fix toggle_monitor_mute/dim/mono in basic_ui
2017-03-18 14:14:02 -07:00
891ad41c48
OSC: fix pan stuck at centre.
2017-03-15 13:24:13 -07:00
175027fb6c
OSC amend access_action with action in line to ignore if param is 0
2017-03-15 09:20:42 -07:00
cd4462323f
OSC: add new /access_action/group/action f 1 for float only controllers
2017-03-14 18:47:41 -07:00
dc98fa6f3f
Fix Faderport Proj button (show-editor action)
2017-03-14 09:27:59 -05:00
248521221c
OSC debug: "ALL" == all messages incl. invalid ones
2017-03-13 22:35:07 +01:00
6af51b52ff
Use dedicated "show editor/mixer" actions
2017-03-10 17:52:42 +01:00
f21111d7df
Faderport uses the Mix and Proj buttons to summon mixer and editor; there is no longer a Toggle.
2017-03-09 14:29:08 -06:00
ad6ddf70df
Don't allow GMCP to override loading_state_version
...
- GMPC does not use it directly
- when GMPC was enabled Stateful::loading_state_version was set to 1000
(the protocol is at 1.0.0)
- it messes up session-loading, particularly various plugin states and
templates (e.g Processor::set_state_2X was used)
2017-03-04 17:55:22 +01:00
f1e6cc50b0
Revert "libs: debug output for faderport/editor mixer strip sync"
...
This reverts commit 6fb91b1ac2
2017-02-25 19:56:51 +01:00
df52c8c748
OSC: correct busses spelling in GUI
2017-02-25 08:49:18 -08:00
6fb91b1ac2
libs: debug output for faderport/editor mixer strip sync
2017-02-24 23:10:03 +01:00
2b9525c991
try to make sure faderport shows the same strip as the editor mixer strip
2017-02-24 22:54:25 +01:00
febd1d5c88
remove misleading/incorrect comment
...
The previously-commented code is precisely what gets invoked
when solo state changes, and had nothing to do with actually
changing solo state in any way.
2017-02-24 10:18:57 +01:00
6fbdfa353b
OSC: remove invalid feedback for solo and pan az.
2017-02-23 15:45:28 -08:00
b5dbfc9931
leave a ToDo note for the mackie surface
2017-02-17 04:02:15 +01:00
9d8829f5bf
Remove direct calls to set solo_control()
...
Changing solo-state needs to be done in rt-context to atomically
propagate solo/mute.
set_control() queues a rt-event, later Session::rt_set_control() calls
Session::update_route_solo_state() to propagate solo/mute.
2017-02-17 03:58:51 +01:00
8243aeb3a1
remove debugging stacktrace from mackie code
2017-02-09 12:47:25 +01:00
e75c713e5e
make the leftmost mixer stripable API at least work as advertised
2017-02-01 11:57:37 +01:00
0f4530af0d
add new API to ControlProtocol to allow GUI to specify left-most mixer strip
...
Subject To Change. Mileage May Vary. Offer Not Good In All Territories.
2017-02-01 11:46:42 +01:00
bb74bba1c7
mackie: catch data on what presentation info aspects changed; don't change banks on a PI change
2017-02-01 10:27:34 +01:00
9e7652ca62
debugging with markk: stacktrace on bank switch in mackie code
2017-01-31 20:12:04 +01:00
6f66fbbf73
remove recently added MackieControl DEBUG_TRACE msgs
2017-01-31 19:16:50 +01:00
1c9df390bc
stop DEBUG_TRACE for MackieControl crashing in some conditions
2017-01-31 19:16:35 +01:00
0d72fe65a2
mackie: use "markN" for new markers, like the GUI (not "markerN")
2017-01-31 18:24:39 +01:00
7c517f6566
mackie: check modifier bits for button AFTER identifying possibly remapped button ID
2017-01-31 18:08:44 +01:00
efd222afe9
mackie: more debug tracing
2017-01-31 17:52:59 +01:00
58c1ff368c
mackie: more debug tracing
2017-01-31 17:48:49 +01:00
