nick_m
828cb52f86
Fail properly when adding a new audio locked meter's tempo.
2016-07-10 02:18:37 +10:00
nick_m
39b70ceced
Check meter/tempo section exists in copy drag.
2016-07-10 02:18:37 +10:00
nick_m
180445c18c
Indicate meter frame even when adding a music-locked meter from the gui.
2016-07-10 02:18:37 +10:00
nick_m
f4ec7f12d1
Fix broken meter manipulation in exact_beat.
2016-07-10 02:18:37 +10:00
nick_m
e40604f6bd
Back to using exact beats for midi region start_beats calculation when trimming.
...
- seems to work quite well, but not tested on live recording.
2016-07-10 02:18:37 +10:00
nick_m
e4a163e2fa
Fix bad comment.
2016-07-10 02:18:37 +10:00
nick_m
6612b73033
Use frame-based (non-exact) beat calculation to set new start in midi region trim.
2016-07-10 02:18:37 +10:00
nick_m
f1802667ba
Experimental patch to ensure playback buffer bounds use minimal beat->frame rounding.
2016-07-10 02:18:37 +10:00
nick_m
4acd365e42
AudioPlaylist doesn't double-notify that contents have changed if bounds have changed.
2016-07-10 02:18:37 +10:00
nick_m
3ee7972069
AudioRegionView - don't do coverage frames unless we're in stacked mode.
2016-07-10 02:18:37 +10:00
nick_m
f65c592567
Editor region list only updates columns that have changed,
2016-07-10 02:18:37 +10:00
nick_m
5afe2993bd
Remove extra ContentsChanged signal on tempo map change.
2016-07-10 02:18:37 +10:00
nick_m
89ea747943
Make bbt ruler visible in default session.
2016-07-10 02:18:37 +10:00
nick_m
9603233a68
Fix note trimming over tempo changes, correct note length properly when resizing midi region.
2016-07-10 02:18:37 +10:00
nick_m
13c851f3cf
Restore earlier midi region trim display.
2016-07-10 02:18:37 +10:00
nick_m
447f9ee062
Exact beat for added regions.
2016-07-10 02:18:37 +10:00
nick_m
3b4a406ba1
Only update midi regions having a playlist after tempo map change, fix 0 length regions from drawing tool.
2016-07-10 02:18:37 +10:00
nick_m
4bdbe77414
Avoid the use of dynamic_cast in TempoMap for performance improvement.
...
- review / comment would be appreciated here.
2016-07-10 02:18:37 +10:00
nick_m
b732147676
Use Note::set (Rect) for speed improvement when rendering notes.
2016-07-10 02:18:37 +10:00
nick_m
39692eed66
Add Note::set (Rect) for optimisation purposes (minimise begin/end changes)
2016-07-10 02:18:37 +10:00
nick_m
71ed5865f5
Temporary work-around for note colour.
2016-07-10 02:18:37 +10:00
nick_m
8e99b59af5
Make TempoMap::bbt_at_frame() more efficient.
...
- should be a no-op
2016-07-10 02:18:37 +10:00
nick_m
db686cca38
Show correct bbt representation of region length in region list.
...
- fixes single-tempo assumption.
2016-07-10 02:18:37 +10:00
nick_m
95ba43916f
Improve performance of automation range moves.
2016-07-10 02:18:37 +10:00
nick_m
7a6efaaf3d
Quick fix to get trim working again (bahaving oddly during trim right now)
2016-07-10 02:18:37 +10:00
nick_m
32a579ec28
Fix ordering thinko in note selected colour.
2016-07-10 02:18:37 +10:00
nick_m
9f61f8a5b0
Complete the task of Playlist::flush_notifications ()
2016-07-10 02:18:36 +10:00
nick_m
550f2925cc
Performance - don't redisplay model immediately in MidiRegionView::enable_display ().
...
- allows MidiRegionView::reset_width_dependent_items () to do it
as intended (i think).
2016-07-10 02:18:36 +10:00
nick_m
e856615c75
Performance tweak - NoteBase doesn't recalculate colour as often.
...
- not sure if we can store this atm.
2016-07-10 02:18:36 +10:00
nick_m
3c1bc99df9
Improve midi model redraw performance by caching colours.
2016-07-10 02:18:36 +10:00
nick_m
c6f2095fb7
Improve the performance of TempoMap::frame_at_beat ().
...
- should be a no-op
2016-07-10 02:18:36 +10:00
nick_m
6b0eadc62f
Use mostly beat-based calculation for displayed midi note position.
2016-07-10 02:18:36 +10:00
nick_m
0e63fa65b5
Remove frame conversion for MidiRegionView::note_in_region_range(), speed up tempo dilation
2016-07-10 02:18:36 +10:00
nick_m
93c24e4433
Paste uses exact beats. rework _start_beats calculation in copy-with-offset ctor.
2016-07-10 02:18:36 +10:00
nick_m
94e0a15325
Exact beat - provide audio->music mapping for region split.
...
- for those not in the know, this series provides a way to
remove the temporal distortion introduced when using an
audio frame-based gui for music-locked objects.
In short, the gui uses an audio frame representation to move
objects. It displays the object using frame_at_beat(), quantizing
the time value to audio frames. This is fine until the user selects
that frame but expects it to be interpreted as a beat.
Thus beat_at_frame() would not produce the user-expected beat
(temporal quantization error of up to 0.5 audio samples).
This is one method of mapping audio time to music time accurately.
2016-07-10 02:18:36 +10:00
nick_m
2d5238d875
Make some musical operations on music-locked regions operate in beats.
...
- use exact beats to determine frame position.
- see comments in tempo.cc for more.
- this hasn't been done for split yet, but dragging and
trimming are supported.
2016-07-10 02:18:36 +10:00
0d050de94e
move latency-recompute into dedicated thread.
...
this fixes an issue with jack1 and jack_latency_recompute() since must not
send a server request from inside the server callback.
2016-07-09 17:42:58 +02:00
b64a6b658e
handle internal-sends from audio to midi busses
2016-07-09 13:51:52 +02:00
20e216afcc
commence testing
2016-07-09 11:55:05 +02:00
56c4eebfdd
move LatencyChanged detection from Plugin to Processor (plugin-insert)
...
* support all Plugin APIs (not implementation specific)
* also check for latency changes when plugins are hard en/disabled
2016-07-09 04:42:21 +02:00
49c9569039
Make MIDI busses possible targets of internal sends
...
The session only added an internal return to new audio busses, and so
only those were proposed in the "New Aux Send" list. Also add the return
to new midi busses, now that internal sends know how to deal with midi.
2016-07-09 02:17:00 +02:00
09c4c51335
Make internal sends aware of non-audio data
...
When most internal sends are created, they are given a panner shell
which is then responsible for audio dispatch. Other data types were left
there without handling them at all. Ensure that all available data is
sent provided the internal send has enough outgoing buffers.
2016-07-09 02:00:27 +02:00
820f99d484
Make Delivery::run more Datatype-agnostic
...
Note that checking the number of output ports is not needed because
IO::copy_to_outputs() will stop if there are less ports of the right
type than buffers (or even none).
2016-07-09 01:21:27 +02:00
d6534eb143
Assert that nobody calls IO::copy_to_output with empty bufs
...
IO::copy_to_output() crashed if there was no channel to copy from. Since
all callers seem to check before calling, just assert() that it is not
the case.
2016-07-09 01:21:27 +02:00
ac923be7af
fix port-sort order for good.
...
TODO find out how to make std::set::find() work with custom sort order,
as std::find may only be O(N) and not O(log (N)).
2016-07-08 21:37:42 +02:00
97b1725023
OSC: Add well known controls for pan and compressor
2016-07-08 11:54:37 -07:00
f84a7605d8
pre-sort port-names
2016-07-08 20:44:21 +02:00
bda5a4a4e6
fix incorrect behaviour of mixer strip [X] (hide) buttons
2016-07-08 14:42:54 -04:00
b7dc66c903
untested hack for AU multi-bus outputs which are not explicitly listed
2016-07-08 20:29:39 +02:00
1228faf2cf
fix thinko
2016-07-08 13:34:52 -04:00
