f87e996013
FP8: unhardcode IDs and strip-count
2017-10-19 16:57:26 +02:00
4c1feac16e
OSC: Move observers to surface based for less traffic.
2017-10-17 14:57:47 -07:00
f0f822feff
OSC: fix crash for wrong number of parameters in set_surface
2017-10-12 13:18:21 -07:00
514c43278b
OSC clean up route observer
2017-10-07 20:23:48 -07:00
2107d09454
US2400: add us2400 files to repository.
2017-10-05 10:55:45 -05:00
0e12c967ea
US2400: add us2400 to surfaces.
2017-10-05 10:03:09 -05:00
b9c6ffac21
fix header order and space alignment
2017-09-24 12:57:27 -04:00
7db12f6b12
convert codebase to use Temporal for various time types
2017-09-24 12:03:54 -04:00
30b087ab3d
globally change all use of "frame" to refer to audio into "sample".
...
Generated by tools/f2s. Some hand-editing will be required in a few places to fix up comments related to timecode
and video in order to keep the legible
2017-09-18 12:39:17 -04:00
de7963941d
Don't build ni-maschine support by default
...
While the pads work, overall integration is still not present, mainly
because the device does not lend itself for editing & mixing in a
DAW environment.
2017-09-18 11:40:53 -04:00
a71171786f
Maschine2 UI: basic widgets
2017-09-18 11:40:53 -04:00
0a6d1ab06e
Skeleton for NI Maschine2 Surface
2017-09-18 11:40:53 -04:00
03e99e9866
fix longstanding compiler warning
2017-09-18 11:40:53 -04:00
c4a5ad33a5
Initial support of Latch for some ctrl-surfaces
2017-09-18 11:40:52 -04:00
766113a024
FP8: call directly into session.
2017-09-18 17:24:57 +02:00
057fd9259e
FP8: add mode to reset gain to unity
...
Re-selecting the most recently selected (blinkig select button) strip
returns gain to unity (0dB)
2017-09-09 21:46:26 +02:00
483ad807ce
fix crashing thinko in push2 code
2017-09-08 18:36:26 -04:00
e07bb07899
OSC: Change jog mode should not stop transport
...
unless started by scrub or shuttle.
2017-08-27 14:15:34 -07:00
dbab25f537
OSC: same fix for /select/*
2017-08-25 10:22:42 -07:00
d7fcdbfe1d
OSC: account for user sending the wrong number of paramters gracefully
2017-08-25 09:45:06 -07:00
ca2d254fdb
OSC cue button up events should not be errors, fixed
2017-08-21 20:08:19 -07:00
ab621b550d
OSC: /cue/enable feedback not changing fixed
2017-08-21 12:10:27 -07:00
6b810b67d9
OSC: aux bus detection fixed for mixbus
2017-08-21 08:40:22 -07:00
Paul Hedderly
18060e597e
prh: Small fix to /cue/send/enable feedback string
2017-08-21 16:23:23 +02:00
6ad4379b4d
OSC: fix issue #7444 send fader position/gain even when 0.
2017-08-10 08:50:46 -07:00
fff9a3cc7f
Allow FaderPort to select VCAs
2017-08-06 22:18:01 +02:00
2d60a69c2d
Consolidate ctrl surface code
2017-08-05 01:28:11 +02:00
81f12f602b
OSC: Fix to make sure buses created with Ardour 4.7 sessions show up
2017-08-03 09:09:02 -07:00
d1558dcab5
OSC: Add command to select Master
2017-08-02 10:43:13 -07:00
ab02284fc2
OSC: expand plugin_descriptor to split into smaller OSC messages (issue #0007433 )
2017-08-01 07:23:27 -07:00
e4925a90cb
OSC: add param to plugin_list response which indicates plugin enable state (OnkelDead)
2017-08-01 07:04:59 -07:00
f51fab35b1
OSC: Make stripname refresh in automation play mode as well.
2017-07-31 07:55:09 -07:00
e94771a58f
OSC: fix VCAs try to connect to controls it does not have.
2017-07-30 18:35:38 -07:00
b5e0b5b09f
PortManager::unregister_port() must be called with process lock
...
This fixes "Failed to register <surface> port" when re-loading a session.
2017-07-28 20:15:15 +02:00
2fa34614d0
Remove unnecessary tests for touch-state
2017-07-25 20:16:04 +02:00
b694ee9e53
OSC: only use gain change signals if value changes
2017-07-24 10:21:31 -07:00
3ab4a1d147
OSC: add use groups to GUI
2017-07-24 10:21:31 -07:00
f3e0fcbb7e
OSC: port mode by default should be manual
2017-07-24 10:21:31 -07:00
f1632fcfd2
OSC: make sure initialization is complete before we allow periodic to run
2017-07-23 20:08:02 -07:00
07e869fda8
OSC: simplify route observer
2017-07-23 20:08:02 -07:00
fde0e293a3
Remove unused "mark" parameter from stop_touch() API
2017-07-24 01:59:18 +02:00
1508838bde
OSC: add /use_group 1/0 command
2017-07-22 12:12:41 -07:00
8af27a7a2e
OSC make all group dispositions the same
2017-07-21 08:22:02 -07:00
b1c73b11fc
FP8: use separate bank offsets per MixMode
2017-07-19 03:04:58 +02:00
601604972c
FP8: Fix Mixbus solo-state and indicate implicit solo (blink)
2017-07-19 01:52:14 +02:00
4922d9f941
FP8: save/restore "two line text" option
2017-07-17 22:59:12 +02:00
601c317d70
Clean up library inheritance (colors.h, utils.h)
...
make libwidget independent of libcanvas.
Confine basics to pbd and gtkmm2ext.
2017-07-17 21:06:04 +02:00
b732aa2ca1
fix void return with value (amend d5d297c4)
2017-07-06 18:01:49 +02:00
d5d297c407
Fix FP8 shutdown sequence (amend d421e56fc)
2017-07-06 16:55:02 +02:00
2a809dcf70
OSC: add delta controls to master, monitor and select as well
2017-07-05 08:08:57 -07:00
b11c64ea5b
OSC: GUI tweaking
2017-07-03 13:22:56 -07:00
b87bec3200
FP8: "Link" mode works with AutomationControl only.
2017-07-03 19:56:16 +02:00
ebc8e352bf
FP8: toggle editor/mixer (now that "link" button is used)
...
..and some TODO notes.
2017-07-03 01:42:36 +02:00
b942c76df9
FP8: properly control enum+integer parameters.
2017-07-02 21:05:42 +02:00
0310f89971
FP8: Implement "Control-Link"
2017-07-02 18:19:13 +02:00
ec76d7ce03
OSC: GUI indicate invalid port and set to old port on defocus if not valid
2017-07-02 08:28:34 -07:00
34c0e3f1c8
FP8: plugin GUI display options
2017-07-02 02:06:48 +02:00
d1d6e696aa
FP8: fix 2-line text
2017-07-02 01:57:21 +02:00
c42db10044
OSC: issue 7176 patch applied. shows plugin descriptors.
2017-07-01 13:13:04 -07:00
2219021389
OSC: add feedback for solo isolate and solo safe to strips (issue 7161)
2017-07-01 11:49:08 -07:00
8bc25fb971
OSC: add strip type flag for master and monitor to strip list
2017-07-01 11:14:55 -07:00
58beb02024
FP8: Use Mixer-Order
2017-07-01 17:11:55 +02:00
a967a942d2
OSC: include all of select in feedback[13]
2017-06-30 20:47:42 -07:00
296c9ae03e
OSC: try to prevent race when clearing devices
2017-06-30 20:13:18 -07:00
41bc5bc116
OSC: test param type in a way that works when optimized too.
2017-06-30 19:05:30 -07:00
d421e56fc0
FP8: Clear input port on close. Fixes crash when switching snapshots
...
The midi_input_handler for the AsyncMIDIPort is connected to the
main event-loop. Events may still be delivered after the surface was
destroyed.
That by itself is not harmful, unless a given message produces a reply:
The _output_port is already gone, FaderPort8::tx_midi crashes.
2017-07-01 02:55:47 +02:00
Johannes Mueller
f7452c2a3a
Addressing #7371 : don't trigger session->undo() from non-GUI-thread
...
When triggering Session::undo() or Session::redo() from a
non-GUI-thread (e.g. from a surface protocol) Ardour crashes if setting a
CairoWidget dirty due to a ENSURE_GUI_THREAD assertion. (see #7371 )
By triggering undo by BasicUI::access_action() rather than by Session::undo()
we ensure that the GUI thread will finally call Session::undo().
So more like a workaround ... but better than crashing :)
2017-07-01 01:04:44 +02:00
389d2cab36
FP8: Scribble-strip display preferences
2017-06-30 19:55:03 +02:00
cd728fdd73
FP8: Allow to select Plugin Presets
2017-06-30 19:13:55 +02:00
1fe1d17ef8
FP8: don't allow to toggle Channelstrip bypass/enable
2017-06-30 02:31:36 +02:00
773c31afc0
FaderPort8 updates
...
* use 2 lines for Plugin Parameter Names
* Expose Plugin Bypass/Enable per plugin
- Shift + Select in Plugin Select Mode
- Bypass Button in Plugin Parameter Edit Mode
2017-06-30 01:59:12 +02:00
86ee4de7a9
OSC: simplify GUI and make less error-prone
2017-06-24 13:13:53 -07:00
33bfe681c9
OSC: Allow /bank_up to accept -1 as well as 1 so encoder can work.
2017-06-23 18:08:04 -07:00
01e75da96b
OSC: make sed_fader work with banking too.
2017-06-23 17:34:22 -07:00
0b21143234
OSC: Add master_send_enable for MB
2017-06-23 17:09:54 -07:00
1fad162256
OSC: redo math for redux control with fewer calls.
2017-06-23 17:09:54 -07:00
2ea14c25ec
OSC: Messages too fast at bank_change/refresh slowed down.
2017-06-23 17:09:54 -07:00
2a08746437
OSC: Fix math error in send fader feedback
2017-06-23 14:26:29 -07:00
1138b62fb8
amend 5e5f7a55; re-add wrongly removed variable
2017-06-23 18:15:50 +02:00
66a3dd7ded
MCU: Remove use of AutomationType as ID, part two.
...
This may need some small tweaks for MB channelstrip to set
print-format (like LV2 plugins would) for cases where the default
value_as_string() differs.
2017-06-23 17:39:20 +02:00
5e5f7a55ee
MCU: Remove use of AutomationType as ID, part one.
2017-06-23 17:39:20 +02:00
5aad9d9a33
OSC: only show visible plugins (not MB channel strip PI)
2017-06-22 22:40:06 -07:00
7af5de2074
OSC: Add increment fader.
2017-06-22 12:54:03 -07:00
57e7531b1f
OSC: allow mixbuses to show
2017-06-22 10:20:48 -07:00
3baf360733
OSC: use internal_to_interface or reverse
2017-06-22 09:21:51 -07:00
3b718c60de
OSC: Accept mixed parameter types for touch
2017-06-21 15:18:56 -07:00
55df5b39bc
Prepare removal of redundant get_user/set_user API.
2017-06-21 18:13:41 +02:00
cb48bb0e1c
remove min/max unbound -- LADSPA special case.
...
This explicit case should never have existed in the first place.
Plugins can always implicitly exceed the range and are expected to
cope with out-of-range values (e.g. meters when fed with a peaking signal
may return an out-of-bounds value)
2017-06-21 18:12:20 +02:00
567c0a8f53
Switch to PBD control-math and prefer Controllable API
...
Note: Control-surfaces should always use interface_to_internal()
and internal_to_interface().
2017-06-21 18:12:04 +02:00
fd3bd35203
OSC: value not initialized soon enough
2017-06-20 13:11:59 -07:00
10db824461
Use Stripable::Sorter in libs
2017-06-17 04:36:28 +02:00
0331a9a233
OSC: plugin feedback mathfix - 0 param (meter) checked for.
2017-06-16 11:33:02 -07:00
7c84deb2c4
OSC: Add send/plugin page values to GUI
2017-06-14 10:28:45 -07:00
d76e6d84c7
OSC: save and restore send/plugin page size.
2017-06-14 08:18:43 -07:00
9c0f6ea948
OSC: Allow set_surface to set send and plugin page sizes.
2017-06-13 16:56:10 -07:00
23554fd185
FP8: use proper API to detect automation-playback
...
The custom code didn't take touch + touching into account when
another surface was touching automation.
2017-06-13 18:09:53 +02:00
9441e8d484
OSC: select channel plugin support with paging.
2017-06-12 12:31:04 -07:00
c69049a853
Fix a compiler warning (optimized builds)
2017-06-12 17:20:41 +02:00
8b8f47430a
OSC: add option to send /reply instead of #reply (OSC1.0 compat)
2017-06-10 09:43:46 -07:00
c4a4857b87
OSC: add optional paging to sends in select.
2017-06-06 09:08:35 -07:00
d35dfa9c93
OSC: Some surfaces may use float for ssid. Accept this too.
2017-05-31 08:39:55 -07:00
b343108756
OSC: check controllable exists before using
2017-05-31 08:39:55 -07:00
640d9d355f
Use correct property name in generic MIDI surface
...
Fixes restoring the feedback interval property, but as the mutator/setter
method doesn't seem to be used this change should have no affect.
2017-05-26 08:48:04 +10:00
2c40b46ca9
OSC: fix return value for successful touch
2017-05-24 13:58:49 -07:00
1e95ccf07d
OSC: Added lpf and hpf controls for freq,enable and slope
2017-05-24 07:37:21 -07:00
f493b24e3e
OSC add feedback for extra comp and eq controls
2017-05-23 17:16:42 -07:00
2f1ad4d9a2
OSC - make /strip/list accept a parameter like everything else
2017-05-23 15:14:31 -07:00
4d927c6bd4
Use braces in BasicUI::jump_by_bars()
2017-05-23 09:13:27 +10:00
7fe188ec92
Use braces in BasicUI::jump_by_seconds()
2017-05-23 09:13:27 +10:00
df185e575e
Use correct variable in BasicUI::jump_by_seconds
2017-05-23 09:13:27 +10:00
b3fb75fead
OSC: Further fixes so multiple controls can touch at once.
2017-05-20 10:17:31 -07:00
ab069b1372
OSC: fix c++98 mistake
2017-05-20 09:09:01 -07:00
6926b7eb75
OSC: Catch case of surface sending fader move before touch
2017-05-19 15:48:36 -07:00
84e1a216bc
OSC: Add fake timeout based touch
2017-05-18 15:32:12 -07:00
d3738b087e
MCP: Fix issue with strip "select" buttons that stayed stuck on.
...
* Depending on individual strips to watch the selection property is prone to failure.
* Stripable_selection_changed() is called when a selection operation is completed.
2017-05-17 15:55:43 -05:00
60cc2823f3
MCP: map the well-known EQ knobs more explicitly, not heuristically.
2017-05-17 15:53:14 -05:00
f2aac0bcae
OSC: Add /strip/fader/touch
2017-05-15 19:38:41 -07:00
f3f1816899
remove unused variable
2017-05-15 19:38:41 -07:00
7e791981f0
OSC: added automation name feedback
2017-05-15 07:43:59 -07:00
fee4b7b3ea
OSC: combine two identical if() statements
2017-05-15 07:43:59 -07:00
b9bbea7174
It might not be obvious why... but 'ARDOUR::ControlProtocol::name()' needs to be a virtual function
...
Basically, libardour is calling functions from libardour_cp and vice versa. For example, libardour needs 'ARDOUR::ControlProtocol::name()' whereas ardour_cp needs 'ARDOUR::Route::soloed()' and various others. Ordinarily, this would require each library to get built before the other one! :-(
To get around this (in MSVC at least) one of the libraries must be forced to use late binding (e.g. by declaring its functions as 'virtual'). It looks like this is already being done for most of the other functions from 'ARDOUR::ControlProtocol', so let's do it for this function too...
2017-05-15 14:46:34 +01:00
3d26a29e8a
Sanitize "well-known" ctrl API
2017-05-14 00:17:11 +02:00
3e2004aa73
OSC: make /*/automation more generic so other controls can be easily added
2017-05-13 14:18:29 -07:00
82e6de3a3f
The #end should be #endif
2017-05-13 08:43:33 -07:00
6a28e02799
More tweaks to FP8 layout for 32C
2017-05-13 07:54:08 -05:00
3efe5bde5f
Update FP8: new controllables, clarify 32C bell-shape labels
2017-05-13 02:02:54 +02:00
7021d02782
don't actually use a method from libardourcp inside libardour; use a PBD::Signal to avoid linker issues
2017-05-12 17:49:09 +01:00
32c3db5c59
OSC: GUI label change
2017-05-12 07:29:29 -07:00
774ebc42e3
OSC: Create new surface struct for ALL incoming messages
2017-05-12 07:29:29 -07:00
eb3f50e15c
change the way ControlProtocols (control surfaces) are notified and handle Stripable selection changes
...
The Editor continues to notify them, but via a direct call to ControlProtocolManager, not a signal.
The CP Manager calls the ControlProtocol static method to set up static data structures holding
selection info for all surfaces and then notifies each surface/protocol that selection has changed.
2017-05-12 14:51:39 +01:00
efc2660fec
MCP: Mixbus32C: Restore missing filter controls to the Dyn page.
2017-05-12 15:44:01 +02:00
8ba868e933
MCU: F-keys are reserved only for user-defined actions; no need for explicit handling.
2017-05-12 15:43:55 +02:00
e6e2b6800e
MCP: Momentarily light buttons when they are used to trigger a defined action.
...
*This is mainly for F-keys
*If a button is not assigned an action, it will not light,
hopefully indicating to the user that it is unmapped.
2017-05-12 15:43:52 +02:00
6f298b1a83
Mackie control panel: display the profile name when any button action is changed.
2017-05-12 15:43:44 +02:00
471ed5af4e
OSC: also init unsaved params on session load.
2017-05-11 13:58:25 -07:00
a51e82a29e
OSC: Initialize all surface struct values on creation
2017-05-11 10:52:38 -07:00
d42da9046e
OSC: Actually set feedback on first /strip/command
2017-05-11 08:21:40 -07:00
0124c2e99d
OSC: fix manual port setting to take effect on first incoming message
2017-05-10 14:14:27 -07:00
a76ee7a4d8
OSC: bind should be boost::bind
2017-05-10 09:56:45 -07:00
c8f805ef7c
OSC: Automation feedback should match command
2017-05-10 09:42:48 -07:00
6c97d70127
OSC: change function name to be better description
2017-05-10 09:21:19 -07:00
50e362ffd3
OSC: simplify code.
2017-05-10 08:02:03 -07:00
86149840a1
resolve ambiguity
2017-05-10 05:00:03 +02:00
e8387e101f
Enums are not Classes in C++98
2017-05-10 04:29:41 +02:00
82fed14f41
OSC: Fix select fader automation play feedback as well fixes issue #7160
2017-05-09 14:10:49 -07:00
a12d4c87c6
OSC: Get gain feedback to show with automation Play.
2017-05-09 13:38:57 -07:00
c3c7dfd3e8
OSC: Add Automation mode feedback to /strip
2017-05-09 12:40:20 -07:00
155401b875
OSC: removed letter automation modes to not conflict with feedback
2017-05-09 11:52:21 -07:00
fe5a778535
OSC: Propagate return value so debug shows errors
2017-05-09 09:05:30 -07:00
56ebea48c0
OSC: set Automation mode for fader
2017-05-09 07:55:32 -07:00
f4d62a2a8e
OSC: automation mode get strip (step 2)
2017-05-09 07:55:32 -07:00
9b4d58393d
OSC: Add framework for /*/automation mode
2017-05-09 07:55:32 -07:00
1eb18f8e27
OSC: make some more paths work with or without a parameter.
2017-05-05 15:02:22 -07:00
379ad3357d
OSC: remove debug output.
2017-05-05 15:02:22 -07:00
0c035778e1
libardour now has CoreSelection object to manage selection status of Stripables and AutomationControls
2017-05-05 18:56:25 +01:00
417f63a29e
FP8: use new libardour API
2017-05-05 17:08:42 +02:00
8288fa40b9
FP8: ignore inactive muted tracks w/mute-clear
2017-05-05 15:36:08 +02:00
3a75e7c53b
FP8: solo+mute undo
...
Eventually this should be moved into libardour: Mixer undo history.
the tentative solution is specifically ifdef'ed FP8_MUTESOLO_UNDO.
2017-05-05 15:26:52 +02:00
a3c70696b6
OSC: personal monitoring, fix crash and minor bugs
2017-05-04 15:52:09 -07:00
c784f70966
OSC: Add /jog/mode/name
2017-05-03 21:38:52 -07:00
16e545ad73
OSC: Fix puctuation
2017-05-03 21:36:58 -07:00
2cb54dec60
OSC: arrange modes in a more logical order.
2017-05-03 18:19:45 -07:00
2bbf83e109
OSC: Add multimode /jog command
2017-05-03 16:33:33 -07:00
2abefde534
OSC scrub, fix numbers to work with usec rather than msec.
2017-05-01 13:53:03 -07:00
e5182f3eb4
OSC: fix scrub to not use boost ptime.
2017-05-01 13:45:47 -07:00
5f06ae43d8
OSC: add /scrub function
2017-05-01 07:08:02 -07:00
a283784cce
FP8: channel-navigation/scroll select track on encoder press
2017-04-29 12:38:53 +02:00
de45ac0e76
FP8: snap-to scroll tracks, both editor+mixer
2017-04-29 12:38:53 +02:00
2012dc2553
OSC: correct spelling
2017-04-21 07:29:13 -07:00
ea1769d711
Resolve potential variable name ambiguity for older compilers
2017-04-21 16:05:24 +02:00
b6c222555f
NO-OP: re-order code, add comments
2017-04-20 17:19:03 +02:00
8add4eefad
FP8: some code comments and cleanup
2017-04-20 16:06:47 +02:00
0656d5ab1a
Use XMLNode::get/set_property API in Faderport surface
2017-04-19 09:36:59 +10:00
23eb1fbf01
Use PBD::string_to<bool>() in GenericMidiControlProtocol class
...
Equivalent to PBD::string_is_affirmative()
2017-04-19 09:36:59 +10:00
7170dd84d8
Use XMLProperty::get/set_property API in CC121 Surface module
2017-04-19 09:36:54 +10:00
bd533e305d
Use XMLNode::set_property API in WiimoteControlProtocol class
2017-04-19 09:36:54 +10:00
bd3965e278
Use XMLNode::get/set_property in Push2 surface
...
Fix push2 property names to use hyphen word separator.
2017-04-19 09:36:54 +10:00
0df955412e
Use XMLNode::set_property in OSC_GUI class
2017-04-19 09:36:54 +10:00
6c1e7153ef
Use XMLNode::get/set_property API in OSC class
2017-04-19 09:36:54 +10:00
1680811dbf
Use XMLNode::get_property API in Mackie DeviceInfo class
2017-04-19 09:36:54 +10:00
77b4e041ac
Use XMLNode::get/set_property API in mackie Surface class
2017-04-19 09:36:54 +10:00
86f403cbbd
Use XMLNode::get/set_property API in MackieControlProtocol class
2017-04-19 09:36:54 +10:00
9554dd4445
Use XMLNode::get/set_property API in mackie surface DeviceProfile class
2017-04-19 09:36:54 +10:00
f82cb87f0c
Use XMLNode::get/set_property API in MIDIControllable class
2017-04-19 09:36:54 +10:00
3be0170e82
Use XMLNode::get/set_property API in GenericMidiControlProtocol class
2017-04-19 09:36:54 +10:00
f28bfb2648
Use XMLNode::get/set_property API in FaderPort class
2017-04-19 09:36:54 +10:00
8144b197c0
Use XMLNode::get/set_property API in ARDOUR::ControlProtocol class
2017-04-19 09:36:54 +10:00
63296285be
Add missing header include to ControlProtocol class source file
2017-04-19 09:36:47 +10:00
362303f793
FP8: Fix sort-order
2017-04-18 16:09:44 +02:00
5dce10500c
FP8: handle backend changes + reconnect
...
When the backend is dropped or changed, on engine-restart
the connection_handler() re-establishes already connected ports.
There's no disconnect when the backend dies or is hard-stopped.
2017-04-18 15:14:00 +02:00
3243e17c71
FP8: allow to re-initialize the Strips w/o restart
2017-04-18 15:01:54 +02:00
bce08cf4f3
FP8: experiment with selection-mode
2017-04-18 13:39:42 +02:00
629b5e0446
clear + re-init faderport at disconnect
2017-04-18 03:20:33 +02:00
8e5a972a24
Managed to trigger an assert()
...
Create new Mixbus session, initially incrementally adding Busses to
the session triggers a series of "assign_stripables()"
2017-04-17 23:50:11 +02:00
84804f7d90
cont'd FP8 tweaks
...
* include Mixbus PRE plugin on Mixbusses
* Mixbus master-assign on right-most "S" button
* fix parameter-banking and assignment
* fix typo in 029e963fb
2017-04-17 20:06:00 +02:00
029e963fb5
FP8: limit fader range
...
In case of VCA masters or otherwise the value can exceed the max
+6dB and internal_to_interface() returns a value > 1.0 which cannot
be represented on the physical fader (MIDI &0x7f wraps)
2017-04-16 23:48:06 +02:00
55cd96df8d
Clean up after generic MIDI surface -- #7311
...
When there are some non-released MIDIControllables, signal are still
delivered to the objects, even if there's no surface thread to handle
the signals anymore.
2017-04-16 19:06:17 +02:00
67f2e4b866
FP8: add metronome level reset
2017-04-16 17:18:23 +02:00
8a3d9317bd
FaderPort8 details:
...
* make shift buttons equivalent
* 2 x stop: move to session-start
* RTZ: return to zero (not session-start)
* in Pan mode: encoder controls pan-width (w/o shift)
2017-04-15 21:20:51 +02:00
18dcd4d7ff
FP8: Configuration UI layout & design (add image, separators)
2017-04-15 15:19:58 +02:00
60c12df517
Fondle Port 8
...
* only start touch on parameters in "Touch" mode.
* fix "mute clear" (also affect mute-automation in touch)
2017-04-14 23:03:31 +02:00
74c8ba5c9a
FP8: assign toggled plugin-parameters to buttons
2017-04-14 23:03:31 +02:00
7197231f4c
FP8: Allow binding "Select" to a controllable or functor
2017-04-14 23:03:31 +02:00
43d9feabd3
cont'd FP8 refinement & details
...
* Access pan-width via shift, press encoder to reset
* Add "touch-start" to encoder events
* Show plugin-param value-bar
* Sends & well-known ctrls: follow strip-selection
* map "select" to strip-selection in Sends-mode
* Fader group override (via shift)
* Prev/Next button tweaks.
* consistent enum naming ...
2017-04-14 19:56:42 +02:00
d43a23fe28
Faderport8 control surface support
2017-04-13 21:21:59 +02:00
d64ca9be08
Properly expose "well known" comp_redux output.
2017-04-12 21:14:50 +02:00
6b8be8fa71
Fix set-*-from-edit-range actions, when accessed from control surfaces.
2017-04-01 09:57:06 -05:00
eb1bd9d8e2
OSC: don't skip when deleting cue observers
2017-03-29 16:24:43 -07:00
8de580c123
OSC: Clear devices should clear cue observers as well.
2017-03-29 16:07:21 -07:00
e7ca514887
OSC: reduce feedback noise for surfaces using /strip/list
2017-03-26 21:16:45 -07:00
f5931457fb
OSC: tell surfaces using /strip/list they need to rebuild after strip add/remove
2017-03-24 14:05:39 -07:00
011c4a05d8
OSC: update /strip/list response to add aux, midi bus and VCAs
2017-03-24 13:07:03 -07:00
f69808b372
BasicUI moved toggle_click,toggle_roll and stop_forget from menu action to session calls
2017-03-19 23:09:45 -07:00
7d41e542fe
OSC: add feedback for /monitor/mute,dim,mono
2017-03-19 08:54:58 -07:00
1af7e97fd0
basic_ui send midi_panic directly to session rather than through GUI
2017-03-19 07:27:24 -07:00
b0e5ab1b81
OSC add /monitor/mute,dim,mono
2017-03-18 20:05:04 -07:00
caae0546a7
OSC fix toggle_monitor_mute/dim/mono in basic_ui
2017-03-18 14:14:02 -07:00
891ad41c48
OSC: fix pan stuck at centre.
2017-03-15 13:24:13 -07:00
175027fb6c
OSC amend access_action with action in line to ignore if param is 0
2017-03-15 09:20:42 -07:00
cd4462323f
OSC: add new /access_action/group/action f 1 for float only controllers
2017-03-14 18:47:41 -07:00
dc98fa6f3f
Fix Faderport Proj button (show-editor action)
2017-03-14 09:27:59 -05:00
248521221c
OSC debug: "ALL" == all messages incl. invalid ones
2017-03-13 22:35:07 +01:00
6af51b52ff
Use dedicated "show editor/mixer" actions
2017-03-10 17:52:42 +01:00
f21111d7df
Faderport uses the Mix and Proj buttons to summon mixer and editor; there is no longer a Toggle.
2017-03-09 14:29:08 -06:00
ad6ddf70df
Don't allow GMCP to override loading_state_version
...
- GMPC does not use it directly
- when GMPC was enabled Stateful::loading_state_version was set to 1000
(the protocol is at 1.0.0)
- it messes up session-loading, particularly various plugin states and
templates (e.g Processor::set_state_2X was used)
2017-03-04 17:55:22 +01:00
f1e6cc50b0
Revert "libs: debug output for faderport/editor mixer strip sync"
...
This reverts commit 6fb91b1ac2
2017-02-25 19:56:51 +01:00
df52c8c748
OSC: correct busses spelling in GUI
2017-02-25 08:49:18 -08:00
6fb91b1ac2
libs: debug output for faderport/editor mixer strip sync
2017-02-24 23:10:03 +01:00
2b9525c991
try to make sure faderport shows the same strip as the editor mixer strip
2017-02-24 22:54:25 +01:00
febd1d5c88
remove misleading/incorrect comment
...
The previously-commented code is precisely what gets invoked
when solo state changes, and had nothing to do with actually
changing solo state in any way.
2017-02-24 10:18:57 +01:00
6fbdfa353b
OSC: remove invalid feedback for solo and pan az.
2017-02-23 15:45:28 -08:00
b5dbfc9931
leave a ToDo note for the mackie surface
2017-02-17 04:02:15 +01:00
9d8829f5bf
Remove direct calls to set solo_control()
...
Changing solo-state needs to be done in rt-context to atomically
propagate solo/mute.
set_control() queues a rt-event, later Session::rt_set_control() calls
Session::update_route_solo_state() to propagate solo/mute.
2017-02-17 03:58:51 +01:00
8243aeb3a1
remove debugging stacktrace from mackie code
2017-02-09 12:47:25 +01:00
e75c713e5e
make the leftmost mixer stripable API at least work as advertised
2017-02-01 11:57:37 +01:00
0f4530af0d
add new API to ControlProtocol to allow GUI to specify left-most mixer strip
...
Subject To Change. Mileage May Vary. Offer Not Good In All Territories.
2017-02-01 11:46:42 +01:00
bb74bba1c7
mackie: catch data on what presentation info aspects changed; don't change banks on a PI change
2017-02-01 10:27:34 +01:00
9e7652ca62
debugging with markk: stacktrace on bank switch in mackie code
2017-01-31 20:12:04 +01:00
6f66fbbf73
remove recently added MackieControl DEBUG_TRACE msgs
2017-01-31 19:16:50 +01:00
1c9df390bc
stop DEBUG_TRACE for MackieControl crashing in some conditions
2017-01-31 19:16:35 +01:00
0d72fe65a2
mackie: use "markN" for new markers, like the GUI (not "markerN")
2017-01-31 18:24:39 +01:00
7c517f6566
mackie: check modifier bits for button AFTER identifying possibly remapped button ID
2017-01-31 18:08:44 +01:00
efd222afe9
mackie: more debug tracing
2017-01-31 17:52:59 +01:00
58c1ff368c
mackie: more debug tracing
2017-01-31 17:48:49 +01:00
9dc2ef28be
mackie: more debug tracing for remapped buttons
2017-01-31 17:43:33 +01:00
8f13d33efe
Revert "mackie: make profile-mapped keys maybe actually do something"
...
This reverts commit 0d7f88afbd
2017-01-31 17:37:45 +01:00
de189721e8
Revert "mackie: improve previous commit - use button_id not button.bid() to make remapping work"
...
This reverts commit 16804e20c8
2017-01-31 17:37:23 +01:00
16804e20c8
mackie: improve previous commit - use button_id not button.bid() to make remapping work
2017-01-31 17:31:10 +01:00
0d7f88afbd
mackie: make profile-mapped keys maybe actually do something
2017-01-31 17:23:45 +01:00
404686d258
more mackie debug tracing
2017-01-31 17:05:30 +01:00
