6e082b16b2
OSC: Add collect of groups or subgroups
2018-06-30 15:25:17 -07:00
baa00942a2
Add method to find subgroup_bus
2018-06-30 15:23:37 -07:00
88c82aeb56
Fix code style
2018-06-30 14:14:31 -07:00
cd0f5e06a9
when creating a route from a template, use correct call to setup XML state so that name/ports are unique
2018-06-28 19:14:37 -04:00
9336bddee2
call IO::prepare_for_reset() on BOTH IO nodes of a PortInsert's XML state, not just one of them.
...
Allows drag-n-drop of port inserts to work
2018-06-28 19:03:59 -04:00
ff03eeab04
fix mixing scope brace
2018-06-25 10:06:57 -04:00
d7ac5792b8
Accommodate recently removed source(s) in our MSVC project (libardour)
...
(this also needs ardour_genericmidi to link to both evoral and boost-regex)
2018-06-25 12:11:10 +01:00
87bab9c0f7
OSC: make select logic more sensible
2018-06-24 20:04:54 -07:00
8725ed5bd1
add Ctl_Dial to get better behaviour when binding a MIDI controller KNOB/DIAL to a toggled controllable.
...
No intent to change Ctl_Momentary or Ctl_Toggle behaviour, plus I tried to document what they are intended to support
2018-06-21 22:28:11 -04:00
870625973e
remove debug output
2018-06-21 15:27:58 -04:00
8a18929d57
remove Session::controllable_by_descriptor() and move code into GenericMIDI code (the only user).
...
This also removes enums introduced to describe well-known parameters for Mixbus. Lookup now involves string
parsing every time, but this is not likely to be a notable cost.
2018-06-21 13:05:58 -04:00
637e70749c
Add script to normalize all tracks
2018-06-20 23:35:55 +02:00
Johannes Mueller
18511f851e
Put duplicate code of a-comp and a-expander into one file ...
...
... for better maintainability
consolidated duplicate code:
* drawing the dB-grid of a-comp's and a-expander's full display
* drawing the gain reduction bar of a-comp's and a-expander's full display
* the entire only-bars display
2018-06-20 22:57:41 +02:00
Johannes Mueller
0c64eacef5
Consolidated a-comp/a-exp run_mono() and run_stereo() to one run()
...
Up to now we had in a-comp and a-exp one run_mono() and one run_stero()
function which where almost identical except that run_stereo() treated two
in/outs and run_mono() only one. Now we store the number of channels
acomp->n_channels according to the URI and in run() we loop over an array of
pointers to the in/out buffers.
2018-06-20 22:23:54 +02:00
Johannes Mueller
65fed2fa89
Make makeup_gain smoothening of a-expander same as in a-comp
2018-06-20 22:10:54 +02:00
4b37e248e1
OSC: fix pre gcc5 problem
2018-06-20 12:39:34 -07:00
e34f006658
OSC: Add /select/vca/toggle
2018-06-20 12:39:34 -07:00
Nikolaus Gullotta
57ce573796
check-in of cleaned up plugin tags by Harrison Consoles intern Chris Hickman
2018-06-20 14:15:18 -05:00
Johannes Mueller
1ad66cfb3c
a-comp: makeup_gain needs to be smoothened after every sample ...
...
... not only once in every run
2018-06-20 21:06:16 +02:00
Johannes Mueller
a0a4db47a7
Add a control port to a-comp select which mode to display inline
2018-06-20 21:06:16 +02:00
Johannes Mueller
f647ac7dae
Allow plugin inline displays to shrink
...
Plugin inline displays were forbidden to shrink as this might cause a deadlock
when the shrinkage causes the scrollbar to disappear.
display shrink → scrollbar unneeded → scrollbar disappears →
more horizontal space -> display grows -> scrollbar appears →
less horizontal space -> display shrink and so forth
This was formerly avoided by not allowing display shrinkage.
The solution proposed here sets the maximum height of the display to the
current height, if a scrollbar is present during resizing and has not been
present during the last resizing. So if this scrollbar disappears (after
resizing it might no longer be needed), the display would have the possibility
to grow, but it does not grow vertically as the maximum height is limited to
the current height.
2018-06-20 21:06:16 +02:00
Johannes Mueller
869d48c9a6
Make a-comp's meter show numerical values in "4.1f"
...
according to discussion in irc.
2018-06-20 21:06:16 +02:00
Johannes Mueller
89aa17fe00
Put input level meter before output level meter in the generic gui
...
This is done by relying on the fact that the generic gui orders the meters
according to their port indices.
2018-06-20 21:06:16 +02:00
Johannes Mueller
6da18b32b5
Visualize the peak of the compressor state in a-comp
2018-06-20 21:06:16 +02:00
Johannes Mueller
619ba94f51
Drop LPF of input level visualization in a-comp
2018-06-20 21:06:16 +02:00
Johannes Mueller
c9bbb01d98
Show the input level in acomp's inline display rather than output level
2018-06-20 21:06:16 +02:00
Johannes Mueller
ef978d1b35
Inlevel output port to visualize the input level in the generic GUI
2018-06-20 21:06:16 +02:00
Johannes Mueller
87ea757a5d
Improve level vizualisation in a-comp
...
* LPF in the signal visialization
* Lower minimum values
2018-06-20 21:06:16 +02:00
Johannes Mueller
3e124704b0
GR-based visualization in a-comp
2018-06-20 21:06:16 +02:00
Johannes Mueller
d29880da89
New attack and release behavior for a-comp
...
Details in http://tracker.ardour.org/view.php?id=7439
2018-06-20 21:06:16 +02:00
Johannes Mueller
112ac13b90
Don't use acomp->v_gainr outside LV2_EXTENDED ifdefs
2018-06-20 21:06:16 +02:00
Nikolaus Gullotta
00fe5a86b1
sr = 0, not rate
2018-06-19 13:56:42 -05:00
Nikolaus Gullotta
c2d162c33e
cap redrawing at 15 times /s
2018-06-19 13:54:16 -05:00
Johannes Mueller
e6a6778466
Revert frame -> sample changes where it's a frame as in Gtk::Frame
2018-06-19 20:17:40 +02:00
6edea6064e
OSC: reworking of previous/next select
2018-06-19 09:46:29 -07:00
2fa49c51b2
OSC: Feedback was not making it to surface
2018-06-19 09:46:29 -07:00
5ce341c127
OSC group sharing should be cleared for VCAs
2018-06-19 09:46:29 -07:00
0141700d4b
OSC: added context based previous/next select
2018-06-19 09:46:29 -07:00
641b8a1139
OSC: select should not show expand if invalid
2018-06-19 09:46:29 -07:00
cc78d78390
OSC expand off should check current sellect
2018-06-19 09:46:29 -07:00
fee23d8778
OSC: Allow expand to be global
2018-06-19 09:46:28 -07:00
293326cd94
OSC do not recalc select if still valid
2018-06-19 09:46:28 -07:00
3a6d7ba321
context menus should have accelerators
2018-06-14 17:30:14 -04:00
59a3b040a3
Hide designated LV2 freewheeling port.
2018-06-09 14:40:46 +02:00
7fbbfc0729
Allow snapping to the start of the video timeline. (should work, but needs testing on a machine with harvid).
2018-06-08 16:12:35 -05:00
1c3dbc7d9e
Remove duplicate class-keys (amend d95df9164)
2018-06-06 15:07:08 +02:00
28f8772c3a
remove aeffectx.h; use vestige.h
2018-06-04 17:38:41 -04:00
c79d0c1a9b
NO-OP: Modify a #include (purely for consistency)
2018-06-04 10:43:19 +01:00
f448041ec0
no error logging for CURL HTTP requests; future callers can request it if necessary
2018-06-02 13:24:31 -04:00
Nikolaus Gullotta
820cbc8c4f
forgot else in selected-tracks check.
2018-06-01 11:25:46 -05:00
