61d413ada4
Make 'Tap tempo' set the bpm to a running average
...
Keep a running average of the interval between clicks on the 'Tap tempo'
button, and use that average to set the bpm value.
2014-07-05 21:47:49 +01:00
e0eaea6471
Add 'Tap tempo' button to 'Edit tempo' dialogue
...
Add a 'Tap tempo' button to the 'Edit tempo' dialogue box that uses
gettimeofday() to time the interval between successive clicks and sets the
beats-per-minute appropriately.
2014-07-05 21:47:48 +01:00
c9b0f0fcb7
debug info to trace down "cannot rename temp session file" errors
...
..but actually, the real error may be concurrent
calls to Session::save_state()
2014-07-05 20:53:22 +02:00
63d81d2419
purge states of Audio-backends that are N/A
...
fixes crashes/assert() when using different builds while
sharing ardour.rc with n/a engine backends marked active.
2014-07-04 15:52:14 +02:00
a86c98df7a
fix up various keybindings added/modified by Ben so that they work.
...
There is still the mystery of why we can specify Return and KP_Return but not Tab.
2014-07-04 08:03:51 -04:00
8fa0f7bc0b
disable latency-compensation preparations for now
...
Don't add delaylines to tracks by default just yet,
currently only sends are aligned with delaylines
2014-07-04 13:57:35 +02:00
e083deff83
rename the action that cycles through edit modes, since there are more than two
2014-07-04 07:49:46 -04:00
b64634e32e
move location of menus file loading and call ActionManager::enable_accelerators() to get all actions setup for binding options
2014-07-04 07:49:26 -04:00
08b1a9d520
add ActionManager::enable_accelerators(), which takes all known Actions and registers them via the UIManager as accelerators.
...
This makes them available for use with key bindings/shortcuts/accelerators even if they have no proxy widget
2014-07-04 07:48:41 -04:00
a2c7fe03ef
remove all accelerator declarations from ardour.menus.in, since they are about to be automatically registered for ALL actions
2014-07-04 07:36:49 -04:00
ba8898bd5f
add new regions created by split to selection after operation is complete
2014-07-03 19:43:35 -04:00
555a5d6348
lots of keybinding changes. added a new action to allow removing markers at the playhead location. numpad now allows you to access marks higher than 9. to locate to a marker, use the numpad decimal to start and end the operation - for example press .19. to locate to marker 19. also added alternate bindings for redo, delete, and several other alternates that will be needed in subsequent commits. tab is not working, using either Tab or nabla in the binding.in file
2014-07-03 17:50:14 -05:00
ba33c6dab6
revert part of 0f1c7b1d71
which broke lots of stuff based on region selection
2014-07-03 15:51:06 -04:00
80d1631aa3
if a Range end is trimmed, in follow-edits mode, locate to the range end so it can be auditioned. (same as trimming a region end)
2014-07-03 12:56:33 -05:00
043b76569d
fix the naming and behavior of always-play-range to match the button, which is follow-edits. when you select a range, the playhead should jump to the start of the range and begin to play the selection. BUT (unlike previous implementation) if the user wants to relocate the playhead, then that should be allowed. The user should always remain in charge of the playhead location. NOTE: your previous config setting will be invalidated. You must re-save a session to overwrite with the new config variable
2014-07-03 12:56:33 -05:00
53a5f5d8ca
actually do something in WaveView::region_resized() which is called whenever the region is resized; implement WaveView::set_region_start() which could be used by an xfade editor etc.
2014-07-03 10:00:12 -04:00
a1c8e67e50
add a method to cancel a pending play_range. this is needed when we are modifying the range with keyboard commands.
2014-07-02 17:35:38 -05:00
0f1c7b1d71
start-range and finish-range should graphically show the range being created. also add bindings for comma and period in addition to existing bindings which require a numpad. the old ones are now alternates. all primary functionality should appear on the qwerrty, and the numpad should be considered an ergonomic redundant alternative if you have one
2014-07-02 17:35:37 -05:00
007664c3db
unique filenames across all searched folders
2014-07-02 23:36:06 +02:00
77e716943f
round A/V offset to video-frames.
2014-07-02 23:36:06 +02:00
3c2c048f40
reinstate same logic, slightly differently implementedm, for choosing range/object mode when pointer is in smart mode and in a track but not in a region
2014-07-02 16:23:46 -04:00
3dbf37eab7
simplify zooming, remove Editor::clamp_samples_per_pixel(), fix getting "stuck" at max and min zoom levels
2014-07-02 15:53:24 -04:00
4c79d35838
remove unused "zoom range clock" from code as part of zoom simplifications
2014-07-02 14:56:36 -04:00
976f006cc0
display key name when debugging keyboard/accel stuff
2014-07-02 12:54:49 -04:00
bc3559925a
allow escape key to work
2014-07-02 12:54:49 -04:00
3047919833
remove implicit range. start-range and end-range work better. documentation changes coming soon
2014-07-02 09:18:31 -05:00
190542c1d0
splice mode is undefined, undocumented, and buggy. ripple does most of what we want. remove splice for now. leave code because it may be revived later
2014-07-01 16:43:00 -05:00
960e5a3c7c
Ripple mode: ripple all after start of first selected region
...
Ripple drags should affect all regions which start at or after the
beginning of the first selected region, not just those which start after
its end.
2014-07-01 20:43:34 +01:00
264c62eb26
Ripple mode: remove debug output
...
Remove std::cerr output, and tidy up a couple of comments.
2014-07-01 20:43:34 +01:00
3f112f17c0
remove debug output
2014-07-01 15:11:09 -04:00
0a87bbc37b
add partial support for mute automation (playback does not work, data is not recorded in the session)
2014-07-01 14:37:05 -04:00
e3a6ea0273
give drop zone its own cursor-ability
2014-07-01 14:37:05 -04:00
e5e12acc56
Merge branch 'ripple-mode-cc' into cairocanvas
...
Fix up merge conflicts in
gtk2_ardour/editor_mouse.cc
gtk2_ardour/editor_ops.cc
Also fix up compile errors.
2014-07-01 19:10:47 +01:00
da65f3778c
Fixes for ripple mode drag
...
Make undo of ripple mode dragging work a bit better, and hopefully prevent
rippled regions from jumping about when being dragged.
2014-07-01 18:46:13 +01:00
cabd3783fe
Ripple mode: fix undo of paste
...
Fix undo of region paste operations in ripple mode.
2014-07-01 18:38:14 +01:00
83ae6beca5
Remove unused code
...
This code was changed to implement ripple mode, but meanwhile it was
removed altogether in cairocanvas. Remove it here too to simplify merging.
2014-07-01 18:38:13 +01:00
23e7cf1019
merge with master.
...
Manually resolved conflicts in import.cc and session.cc
2014-07-01 09:46:18 -04:00
4244ea6546
left-align all pref/option labels for consistency.
2014-07-01 14:52:35 +02:00
b47c20783d
(hopefully) fix smart-mode breakage of xfade operations
...
We needed to set the selected regionview from a click when clicking on xfade items, but I also removed duplicate logic for some similar items
2014-06-30 19:18:34 -04:00
dff73d34d9
move draggable playhead to editor tab of preferences
2014-06-30 19:18:34 -04:00
d790881a84
remove cruft
2014-06-30 22:58:09 +02:00
0ec4784c2b
change default take-name
2014-06-30 22:58:08 +02:00
e8fc8aa992
new UI config var to allow playhead to be optionally draggable (default is: yes, it can be dragged)
2014-06-30 16:32:38 -04:00
d816c225a4
more extensive canvas debug message for canvas-enter-leave tracing
2014-06-30 16:32:01 -04:00
79b9a044b8
add event-insensitivity to the list of conditions that causes a container to NOT add its children to the list of items-at-point
2014-06-30 16:31:31 -04:00
7b8fd17719
make canvas drop sensitive to scroll events
2014-06-30 14:47:57 -04:00
89f673a7a7
context click over a trim handle is semantically equivalent to a context click on the xfade
2014-06-30 13:58:46 -04:00
5165bf241d
new region base color
2014-06-30 13:58:46 -04:00
416abf7f1c
ensure that Editor::entered_track is reset during session deletion to avoid a crash when we explicitly unset it elsewhere
2014-06-30 13:58:46 -04:00
156f01cda6
fix bae86a2d
- retain default values
...
set element values before calling update()
2014-06-30 19:01:28 +02:00