32c3db5c59
OSC: GUI label change
2017-05-12 07:29:29 -07:00
774ebc42e3
OSC: Create new surface struct for ALL incoming messages
2017-05-12 07:29:29 -07:00
eb3f50e15c
change the way ControlProtocols (control surfaces) are notified and handle Stripable selection changes
...
The Editor continues to notify them, but via a direct call to ControlProtocolManager, not a signal.
The CP Manager calls the ControlProtocol static method to set up static data structures holding
selection info for all surfaces and then notifies each surface/protocol that selection has changed.
2017-05-12 14:51:39 +01:00
efc2660fec
MCP: Mixbus32C: Restore missing filter controls to the Dyn page.
2017-05-12 15:44:01 +02:00
8ba868e933
MCU: F-keys are reserved only for user-defined actions; no need for explicit handling.
2017-05-12 15:43:55 +02:00
e6e2b6800e
MCP: Momentarily light buttons when they are used to trigger a defined action.
...
*This is mainly for F-keys
*If a button is not assigned an action, it will not light,
hopefully indicating to the user that it is unmapped.
2017-05-12 15:43:52 +02:00
47291389bc
Mackie MCP: Assign some F-keys for default user profile.
2017-05-12 15:43:50 +02:00
6f298b1a83
Mackie control panel: display the profile name when any button action is changed.
2017-05-12 15:43:44 +02:00
471ed5af4e
OSC: also init unsaved params on session load.
2017-05-11 13:58:25 -07:00
a51e82a29e
OSC: Initialize all surface struct values on creation
2017-05-11 10:52:38 -07:00
feab5ef91e
re-order per-object and global selection change signals
2017-05-11 18:29:03 +01:00
d42da9046e
OSC: Actually set feedback on first /strip/command
2017-05-11 08:21:40 -07:00
24d5f1a624
Tweak/fix splash screen event-loop
...
Prevent possible endless loop in Splash::display() and handle
some related edge-cases and race conditions WRT expose_done
and is_visible().
2017-05-11 14:20:56 +02:00
26593d08ed
NO-OP: whitespace
2017-05-11 14:20:56 +02:00
b4346862e1
context click on marker > loop range should set loop range
2017-05-11 13:16:07 +01:00
5830ddfec2
emit per-Stateful PropertyChanged signal when Stripables become selected
2017-05-11 10:04:28 +01:00
0124c2e99d
OSC: fix manual port setting to take effect on first incoming message
2017-05-10 14:14:27 -07:00
c0b54e868f
Fix another possible case of illegal use of reserved port-names
...
Session::io_name_is_legal() is used for Routes and Processors:
Route::set_name(), ProcessorBox::rename_processor() and
and Route::ensure_track_or_route_name() -- it is not used for actual
I/O objects.
2017-05-10 20:29:08 +02:00
a82cfd2461
Fix reserved ports:
...
* "Click" is not translated
* add auditioner and FaderPort ctrl surfaces.
2017-05-10 20:29:08 +02:00
a76ee7a4d8
OSC: bind should be boost::bind
2017-05-10 09:56:45 -07:00
c8f805ef7c
OSC: Automation feedback should match command
2017-05-10 09:42:48 -07:00
6c97d70127
OSC: change function name to be better description
2017-05-10 09:21:19 -07:00
50e362ffd3
OSC: simplify code.
2017-05-10 08:02:03 -07:00
2b33d35e5c
Remove ambiguity to keep MSVC happy
...
NB: Do we really need 'floor()' here?? (we seem to be multiplying integers)
2017-05-10 12:22:57 +01:00
bcbdd858fa
Selection::get_stripables() needs to recurse into an Automatable's child Automatables when looking for for an Automation Control
...
It also needs renaming (to come)
2017-05-10 08:52:55 +01:00
86149840a1
resolve ambiguity
2017-05-10 05:00:03 +02:00
e8387e101f
Enums are not Classes in C++98
2017-05-10 04:29:41 +02:00
7b0ac0e20a
ArdourButton: Pick up initial action sensitivity
...
e.g. monitor-section show/hide button
2017-05-10 00:26:02 +02:00
0e6e6cfde6
Remember Monitor-section state (show/hide, attached/detached)
2017-05-10 00:26:02 +02:00
ac03e4a937
Bump VST param-name length limit to 128 bytes and centralize definition
...
The official VST spec says 8 bytes, JUCE uses 24 + 1, and there's
anecdotal evidence that some VSTs use up to 100 (which apparently works
in many hosts).
2017-05-10 00:26:02 +02:00
82fed14f41
OSC: Fix select fader automation play feedback as well fixes issue #7160
2017-05-09 14:10:49 -07:00
a12d4c87c6
OSC: Get gain feedback to show with automation Play.
2017-05-09 13:38:57 -07:00
c3c7dfd3e8
OSC: Add Automation mode feedback to /strip
2017-05-09 12:40:20 -07:00
155401b875
OSC: removed letter automation modes to not conflict with feedback
2017-05-09 11:52:21 -07:00
fe5a778535
OSC: Propagate return value so debug shows errors
2017-05-09 09:05:30 -07:00
56ebea48c0
OSC: set Automation mode for fader
2017-05-09 07:55:32 -07:00
f4d62a2a8e
OSC: automation mode get strip (step 2)
2017-05-09 07:55:32 -07:00
9b4d58393d
OSC: Add framework for /*/automation mode
2017-05-09 07:55:32 -07:00
37a4987dab
Ardour does support VST's audioMasterGetProductString, return true;
2017-05-09 16:31:42 +02:00
4e08f5c169
iterator std::set::erase (iterator) is C++11
2017-05-08 16:30:54 +02:00
2c7cb9065f
Limit clock displays to 30days (720hours) by default.
...
This prevents various edge-cases of selection-clocks (eg. unbound range
selection after start-range; and makes it near impossible to roll-over
2^63 using GUI operations)
2017-05-08 12:37:17 +02:00
2ed08f0771
fix copy-n-paste error
2017-05-08 11:03:35 +01:00
0596032b36
fix logic when removing routes
...
Selection change and re-order signals are distinct.
2017-05-08 10:56:24 +01:00
7b2063d62d
remove misc. debug output
2017-05-08 10:41:12 +01:00
7d523dc43c
when removing a Route from Session, remove it from CoreSelection and signal that change if necessary
2017-05-08 10:41:12 +01:00
24b8004bf7
when removing Stripables from CoreSelection by ID, be sure to remove all possible entries in the Selection
...
A Stripable may have itself plus zero-to-N automation controls in
CoreSelection.
2017-05-08 10:41:12 +01:00
005fa9176a
allow Session to call Session::remove_stripable_by_id()
2017-05-08 10:40:27 +01:00
8ddbbe427d
when a Route is removed, don't bother triggering a sync-presentation-info-from-treeview because it isn't necessary
...
Also, don't update mixer selection unless selection actually changed
2017-05-08 10:40:27 +01:00
d51049f343
when a Route is removed, don't bother triggering a sync-presentation-info-from-treeview because it isn't necessary
2017-05-08 10:40:27 +01:00
Hiroki Inagaki
eb133dd934
Update Japanese translation
2017-05-08 11:02:24 +02:00
