Johannes Mueller
18511f851e
Put duplicate code of a-comp and a-expander into one file ...
...
... for better maintainability
consolidated duplicate code:
* drawing the dB-grid of a-comp's and a-expander's full display
* drawing the gain reduction bar of a-comp's and a-expander's full display
* the entire only-bars display
2018-06-20 22:57:41 +02:00
Johannes Mueller
0c64eacef5
Consolidated a-comp/a-exp run_mono() and run_stereo() to one run()
...
Up to now we had in a-comp and a-exp one run_mono() and one run_stero()
function which where almost identical except that run_stereo() treated two
in/outs and run_mono() only one. Now we store the number of channels
acomp->n_channels according to the URI and in run() we loop over an array of
pointers to the in/out buffers.
2018-06-20 22:23:54 +02:00
Johannes Mueller
1ad66cfb3c
a-comp: makeup_gain needs to be smoothened after every sample ...
...
... not only once in every run
2018-06-20 21:06:16 +02:00
Johannes Mueller
a0a4db47a7
Add a control port to a-comp select which mode to display inline
2018-06-20 21:06:16 +02:00
Johannes Mueller
869d48c9a6
Make a-comp's meter show numerical values in "4.1f"
...
according to discussion in irc.
2018-06-20 21:06:16 +02:00
Johannes Mueller
89aa17fe00
Put input level meter before output level meter in the generic gui
...
This is done by relying on the fact that the generic gui orders the meters
according to their port indices.
2018-06-20 21:06:16 +02:00
Johannes Mueller
6da18b32b5
Visualize the peak of the compressor state in a-comp
2018-06-20 21:06:16 +02:00
Johannes Mueller
619ba94f51
Drop LPF of input level visualization in a-comp
2018-06-20 21:06:16 +02:00
Johannes Mueller
c9bbb01d98
Show the input level in acomp's inline display rather than output level
2018-06-20 21:06:16 +02:00
Johannes Mueller
ef978d1b35
Inlevel output port to visualize the input level in the generic GUI
2018-06-20 21:06:16 +02:00
Johannes Mueller
87ea757a5d
Improve level vizualisation in a-comp
...
* LPF in the signal visialization
* Lower minimum values
2018-06-20 21:06:16 +02:00
Johannes Mueller
3e124704b0
GR-based visualization in a-comp
2018-06-20 21:06:16 +02:00
Johannes Mueller
d29880da89
New attack and release behavior for a-comp
...
Details in http://tracker.ardour.org/view.php?id=7439
2018-06-20 21:06:16 +02:00
Johannes Mueller
112ac13b90
Don't use acomp->v_gainr outside LV2_EXTENDED ifdefs
2018-06-20 21:06:16 +02:00
52aa9bf848
a-comp: Fix typo with previous patch
2017-11-12 00:16:44 +11:00
f3efff4c7e
a-comp: Fix noise floor - asymptotics
2017-11-11 14:26:50 +11:00
Johannes Mueller
6663a26755
Signal wish to show inline display in gui by lv2:optionalFeature
...
... in .ttl file rather than by extension_data() in code. That's more in the
spirit of LV2.
2017-07-31 21:31:23 +02:00
Johannes Mueller
e75db87bf6
Tweaking the a-comp inline display a bit. Make it more skinny.
2017-07-31 21:31:23 +02:00
Johannes Mueller
2716ce41e0
Indicate whether to show plugin's inline display in GUI
...
This is currently done by an extension data similarly to
LV2_INLINEDISPLAY__interface.
2017-07-31 21:31:23 +02:00
Johannes Mueller
59775df9be
Simplified inline display if the channel strip is not wide enough
...
If the width of the display area is below 200 px, we switch from the graph
display to displaying only two bars, one for output level and one for gain
reduction. In the bar mode we also visualize threshold and ratio.
2017-07-31 21:31:22 +02:00
Johannes Mueller
24cbb1b153
Honor attack and release parameters in a-comp's inline graph
2017-07-31 21:31:22 +02:00
Johannes Mueller
ccab32654b
Indicate gain reduction in a-comp
2017-07-31 21:31:22 +02:00
e65ff3fb4a
Show range -60 .. +10 dBFS in acomp's inline display
2017-07-31 21:31:22 +02:00
Johannes Mueller
85106d81a0
Set makeup to 0.f when bypassed also in stereo version
2017-07-31 21:31:22 +02:00
Johannes Mueller
29df879edd
Adjust the indication of the treshold value by the makup gain.
...
When lifting the compressor curve by the makeup gain value the actual
treshold (the level when the curve kinks in) is also lifted. Therefore we need
to adjust the dashed line indicating the threshold as well as the level when
the color gradient to show compression kicks in.
2017-07-31 21:31:22 +02:00
Johannes Mueller
dff4153024
Also the stereo version needs to set need_expose
2017-07-31 21:31:22 +02:00
Johannes Mueller
f68754b19d
Show a-comp's makeup grain in inline rendering
2017-07-31 21:31:22 +02:00
Johannes Mueller
0109042e7b
Increase range of a-comp#stereo release time
...
Like for the mono version in f52443e17e
2017-07-21 16:11:17 +02:00
Jelle van der Waa
b1cf27bed4
Fix duplicate ‘const’ declaration specifier
2017-07-12 12:09:59 +02:00
5f1d94a7b2
Protect a-comp's display/state against NaN/Inf.
2016-11-29 09:04:13 +01:00
f52443e17e
Increase range of a-comp release time.
...
This facilitates ducking music for voice-overs w/o hold-time.
2016-10-15 21:27:29 +02:00
aca6e667a8
update a-plugins to use official lv2plug.in URI
2016-09-18 19:07:49 +02:00
c6ef3a75d3
backwards compatible a-comp stereo sidechain ports
2016-08-27 18:08:46 +02:00
f814e68e30
Prepare a-comp for click-free bypass/enable
2016-08-27 17:14:49 +02:00
0fa1123f82
NO-OP clean up plugin ttl
2016-08-27 16:01:16 +02:00
613ae0c110
Nobody expects the LV2 inquisition!
2016-08-13 14:51:57 +02:00
dd88461942
clean up plugin ttls - always add semicolon for compatibility
2016-08-09 22:00:38 +02:00
62cd4d43bf
a-Comp: Fix bug with DSP in the knee processing region
2016-07-20 20:10:46 +10:00
f71fdd4143
clean up a-comp, remove old prototype UI
2016-07-14 21:41:16 +02:00
43f8d2503c
a-reverb prototype (based on setBfree b_reverb)
2016-07-12 16:43:10 +02:00
1f02dd2a85
fix compilation with lv2 < 1.10 (lv2 extended)
2016-07-12 13:44:55 +02:00
83e1d9fff3
tweak a-series plugin names
2016-07-05 17:17:59 +02:00
5966612a4f
consistent use of fmaxf() in a-comp
2016-07-05 15:38:24 +02:00
a16c0c445a
a-comp: Use input signal x as cutoff for inline comp curve
2016-07-05 18:36:04 +10:00
2a7bd996cd
a-comp: Fix inline comp curve shading
2016-07-05 18:19:00 +10:00
bf7c4c7d60
a-comp: Fix peak level on both stereo and mono plugins
2016-07-05 15:07:06 +10:00
8507d2c9dd
add required check for cairo in a-comp
2016-07-04 15:10:35 -04:00
2f7c167fc9
a-comp: Make ratio control logarithmic
2016-07-05 02:32:05 +10:00
46bfe2b51a
a-comp: Add stereo version
2016-07-05 02:15:47 +10:00
a1a6dd3865
a-comp display is getting fancy :)
2016-07-04 15:50:05 +02:00
