Commit Graph

37257 Commits

Author SHA1 Message Date
87b5849a7b kbd bindings: fix issues with delete & backspace bindings in draw/i-edit mode
We now use the same actions in all modes, and the logic is:

1. is there a selected mixer strip and are we in it: if so, delete selected
   processors
2. are we in draw or internal mode? if so ..
   2a. if there are selected control points, delete them
   2b. if not, attempt to delete MIDI notes
   2c. done
3. continue with delete operation as before
2023-04-25 11:38:16 -06:00
595e2e2914
VST3: notify GUI when plugin parameter names change 2023-04-24 22:32:35 +02:00
82447431f4
VST3: properly debug ParamTitlesChanged 2023-04-24 20:58:07 +02:00
3b4f9a231f
VST3: debug ParamTitlesChanged 2023-04-24 19:38:17 +02:00
95de61f74e
Fix race condition when closing a session
~Session calls AudioEngine::remove_session(), which fades out,
then unsets the session, and then in libs/ardour/audioengine.cc:460
```
session_removed.signal(); // wakes up thread that initiated session removal
```

Session d'tor continues, and calls Port::PortDrop(), which
unregisters all ports one at a time.

Concurrently, AudioEngine continues, and calls PortManager::silence_outputs
which gets all ports first (!), and then iterates over them.

There is a race condition which can lead to
DummyAudioBackend::get_buffer: Assertion `valid_port (port)' failed
2023-04-24 17:43:08 +02:00
John Emmas
40738b2bee A couple of extra requirements for DEBUG_THREAD_PRINT 2023-04-24 14:51:04 +01:00
John Emmas
81d7a51498 Minor change to commit #35b5861195 2023-04-24 12:40:36 +01:00
c3f65a2237
Add Lua DSP processor to downmix 5.1 to stereo 2023-04-24 01:59:50 +02:00
649ad0f052
VST3: update parameter and Bus names on plugin's request
This is currently only the backend implementation,
the GUI is not yet notified of the change
2023-04-24 01:54:35 +02:00
c95c11e186 remove debug output 2023-04-23 11:34:28 -06:00
35b5861195 try to avoid output pthread_t as-is, due to MSVC etc. 2023-04-23 11:26:00 -06:00
c16ee928de fix ruler dialog 2023-04-22 17:58:28 -06:00
8cc16f2b81 convert std::cerr output to DEBUG_TRACE 2023-04-22 14:38:44 -06:00
ec5320c5f1 transport master: do not unregister port when session goes away
TransportMasters are independent of the session, and thus their port lifetimes should be
also.
2023-04-22 14:38:44 -06:00
9625d22c0d
Add Lua bindings for TempoEditBehavior
See also 8fbf2c3f52
2023-04-22 22:15:00 +02:00
a7ca4cf8a1 CoreAudio: subscribe to device-alive property
This notifies the user about device disconnect and properly
shuts down the backend.
2023-04-22 19:36:37 +02:00
65c81feb5e fix consistency and accuracy of tempo edit behavior setting 2023-04-22 11:12:21 -06:00
65380797e1
Fix windows debug builds (really now)
This partially reverts commit 4dc4d53004.
2023-04-22 03:00:40 +02:00
7f198c7c2f
Amend 4dc4d53: fix missing use/lib includes for luabindings 2023-04-22 02:18:05 +02:00
4620d138ee import_pt: Look up tracks by name instead of by number
This allows existing tracks with correct names to be the target for import.
2023-04-22 10:09:55 +10:00
4dc4d53004
Fix windows debug builds (obj file too large)
This fixes a "too many sections" issue
```
Fatal error: can't write 159 bytes to section .text of build/libs/ardour/luabindings.cc.1.o: 'file too big'
x86_64-w64-mingw32-as: build/libs/ardour/luabindings.cc.1.o: too many sections (36781)
```
2023-04-22 02:03:20 +02:00
8629aea237 push2: shift held while using touch strip sends modulation, not pitch bend 2023-04-21 17:20:17 -06:00
2aee4765e9 don't try to print pthread_self() 2023-04-21 15:38:40 -06:00
4052537e0f midisurfaces: make connection_handler() private 2023-04-21 15:38:40 -06:00
27155732ff
MIDI input input follows selection groups
This also mitigates an issue that selecting a track in
a group may select other tracks. Previously the last
selected track's input was connected to MIDI ports, which
is usually not the track that the user clicked on.
2023-04-21 22:50:49 +02:00
f718279949 surfaces & event loops: i really mean no more request buffer factories 2023-04-21 13:55:58 -06:00
b0586763ba libpbd: changes to pre-registration of signal emitting threads
There is no need to preallocate request buffers for these threads - the event
loops that require them can allocate them when they discover and register the
pre-registered threads. This also means that event loops do not need to
register request buffer factories.
2023-04-21 13:43:46 -06:00
ba66381ab0 push2: remove unused member 2023-04-21 12:16:37 -06:00
7ad0deff10 abstractui: don't register self as a sending thread
if thread A emits a signal that is handled by thread A, no request buffers are
involved.
2023-04-21 12:16:37 -06:00
4a2c27ed6d abstractui: provide a message if an event loop wakes but finds no work
(this only occurs for debug builds)
2023-04-21 12:16:37 -06:00
6e65e9c82f abstractUI: pseudo-no-op: debug trace message expansion, and some reformatting 2023-04-21 12:16:37 -06:00
5d023b4c60 libpbd: fix an important thinko for cross-thread signal architecture
The old code assumed that the thread that created a request buffer for a given
signal-emitting thread would be the latter thread, and thus a thread-local
pointer to the request buffer could be used. This turns out not to be true: the
GUI thread tends to be responsible for constructing the request buffers for
pre-registered threads.

That mechanism has been replaced by using a RWLock protected map using
pthread_t as the key and the request buffer as the value. This allows any
thread to create and register the request buffers used between any other pair
of threads (because the lookup always uses a pthread_t).

The symptoms of this problem were a signal emitted in an audioengine thread
that was propagated to the target thread, but when the target thread scans its
request buffers for requests, it finds nothing (because it didn't know about
the request buffer). In a sense, the signal was successfully delivered to the
target thread, but no meaningful work (i.e the signal handler) is performed.
2023-04-21 12:16:37 -06:00
6eec11e50e midi surfaces: fix debug trace string 2023-04-21 12:16:37 -06:00
9dc53f9400 midi surfaces: no reason for the connection handler to be virtual 2023-04-21 12:16:37 -06:00
0eed821eb9 JACK: do not set the thread-init callback
Because we use the non-callback API, we can call our thread init callback
ourselves from ::process_thread(). In addition, the init_callback in JACK is
used by every thread JACK creates, including the messagebuffer thread, and this
confuses things from an Ardour POV where the callback was intended just for
realtime threads.
2023-04-21 12:16:37 -06:00
b66bb61650 audioengine thread(s) should have their actual numbered name 2023-04-21 12:16:37 -06:00
074516cdb4 libpbd: provide access from a ScopedConnection to the underlying UnscopedConnection 2023-04-21 12:16:37 -06:00
5dc75694f0 libpbd: fix return type of Signal<>::size() 2023-04-21 12:16:37 -06:00
70e56ba4e9
Amend 2f3841a8, fix Mixbus build 2023-04-21 03:01:26 +02:00
Nil Geisweiller
57a5f96a98
NO-OP: use Tab to indent 2023-04-21 01:00:41 +02:00
Stefan Westerfeld
55dc3113f3
ace-fluidsynth: fix free_path initialization in save 2023-04-21 00:58:24 +02:00
3364fdd9f3
Update context menu for subgroup bus creation
Rather than hiding options that are not available,
all options are shown and the sensitivity is
set accordingly.
2023-04-21 00:41:30 +02:00
2f3841a81d
Add support for MIDI subgroup busses
This also fixes the channel-count use by the bus,
depending on the type (aux or direct out).

Mixbus detection is also moved from the GUI to the
backend.

This also limits the number of subgroup busses to one,
so that "Remove subgroup bus" works properly.
Eventually we should allow multiple subgroup busses
for aux-sends.
2023-04-21 00:40:59 +02:00
bedca7b5ef
Amend prev commit, pick different max channels for custom config 2023-04-20 19:08:29 +02:00
24986b1f17
Add dialog to configure custom number of chnnels 2023-04-20 19:04:39 +02:00
d2a4e0ac9a import_pt: Fix PT import to session with existing tracks
Previously, the PT import would place regions on tracks
numbered from 0, therefore landing on unrelated tracks
when pre-existing tracks were present in the session.

This change skips all existing ardour tracks and imports
the PT regions onto the correctly named, appended tracks.

If any tracks exist with the same names as the ones in the import,
the new tracks get an incremented number at the end of them and
the imported regions are placed on the new track, as expected.
2023-04-20 15:45:32 +10:00
03b4635bea
Fix a small memory leak 2023-04-19 14:20:48 +02:00
7094c82e75
Add Lua bindings to std::shared_ptr<T const>
This is required after the recent RCU change to return
const shared pointers for read (295dbd8e1).
2023-04-19 01:46:58 +02:00
b4d8a3f933 get initial display for tempo ruler more correct 2023-04-18 14:37:46 -06:00
be73956f4c add GUI option for controlling default tempo edit behavior 2023-04-18 14:30:59 -06:00