manual/include/monitor-setup-in-ardour.html
2018-11-08 11:35:01 -08:00

50 lines
1.7 KiB
HTML

<p>Ardour has three main settings which affect how
monitoring is performed. The first is
<kbd class="menu">Edit &gt; Preferences &gt; Signal Flow &gt;
Record monitoring handled by</kbd>. There are two or three
options here, depending on the capabilities of the hardware.
</p>
<p> The other two settings are more complex. One is
<kbd class="menu">Tape machine mode</kbd>, found in the
same dialog, and the other is the
<kbd class="option">Session &gt; Properties &gt; Monitoring
automatically follows transport state</kbd> setting.
</p>
<p>
Monitoring also depends on the state of the track's record-enable button,
the session record-enable button, and on whether or not the transport is
rolling.
</p>
<h3>Software or Hardware Monitoring Modes</h3>
<p>
If Ardour is set to <dfn>external monitoring</dfn>, Ardour does not do any
monitoring.
</p>
<h2>Monitoring in Non-Tape-Machine Mode</h2>
<p>
When <dfn>Tape-Machine mode is off</dfn>, and a track is armed, Ardour
<em>always</em> monitors the live input, except in one case: if the transport is
rolling, the session is not recording, and <dfn>auto-input</dfn> is active,
the playback from an armed track will be heard.
</p>
<p>
Unarmed tracks will play back their contents from disc, unless the
transport is stopped <em>and</em> <dfn>auto-input</dfn> is enabled.
In this case, the track monitors its live input.
</p>
<h2>Monitoring in Tape-Machine Mode</h2>
<p>
In <dfn>Tape-Machine mode</dfn>, when a track is armed, its behaviour is
the same as in non-tape-machine mode.
</p>
<p>
Unarmed tracks however will always just play back their contents from
disk; the live input will never be monitored.
</p>