manual/include/inserts.html

36 lines
1.7 KiB
HTML

<p>
<dfn>Inserts</dfn> are signal tap points that can be placed anywhere
inside a channel strip. Unlike Auxes, they will interrupt the signal flow,
feeding the signal from before the insert point to its <dfn>Insert
send(s)</dfn>, and connecting the remainder of the channel strip to the
<dfn>Insert return(s)</dfn>, both of which are either audio device or JACK ports.
While jack ports are visible to other JACK applications, ALAS ports are only
useful for patching in audio equipment external to the computer. If inserting
a software processor is required, a plugin would be the first choice. If a plugin
is not available then the jackd audio backend would have to be used. This is
not very common any more but there are some older jack clients that require
using jack.<br>
Inserts work the same as the inserts on analog consoles except they are not
normalled like most jacks on an analog console.
</p>
<p>
An insert allows to either use a special external DSP JACK
application that is not available as a plugin, or to splice an external
analog piece of gear into a channel strip, such as a vintage
compressor, tube equalizer, etc. In the latter case, the inserts would first
be connected to a pair of hardware ports, which are in turn connected to the
outboard gear.
</p>
<p>
Disabling (bypassing) an insert is done by clicking on its LED in the processor box.
</p>
<p class="note">
When an insert is created, the signal will be interrupted until the relevant
connections to the insert ports are made!
</p>
<p class="note">
Inserts will incur an additional period of latency, which can be
measured and compensated for during mixing, but not during tracking!
</p>