manual/include/osc58-using-the-setup-dialog.html

192 lines
7.0 KiB
HTML

<p>
Starting with Ardour 5.1 OSC has a graphic setup dialog. This dialog
can be accessed from Preferences->Control Surfaces. Select OSC and
click on the Show Protocol Settings.
</p>
<p>
The Ardour OSC dialog has three tabs. The main tab, the Strip Types
tab and the Feedback tab.
</p>
<p>
Many OSC devices get their IP from a DHCP making it difficult to set
an IP in Ardour's OSC settings. Therefore, most of the settings are
<em>default</em> settings. Values are set and the next OSC surface to
send an OSC message to Ardour will use those settings. An OSC
surface that has previously sent a message to Ardour will retain the
settings it already had. Any change to a setting will reset all
device settings. A <em>/refresh</em> message will set that device to
any new settings. The use of <em>/set_surface</em> will override all
settings except <em>Port Mode</em>. <em>Port Mode</em> affects all
connected surfaces and so all surfaces must use either the set manual
port or send OSC messages from the same port they expect to receive
feedback on.
</p>
<h2>Dialog settings</h2>
<h3>OSC setup tab</h3>
<figure>
<img alt="The OSC configuration dialog" src="/images/osc-dialog.png">
<figcaption>
The OSC configuration dialog
</figcaption>
</figure>
<h4>Connection:</h4>
<p>
This field is informational only. It shows where Ardour will receive
OSC messages. The system Name and the Port are the most important parts.
Normally, Ardour will use 3819 as its server port. However, if some
other server is already using this port, Ardour will try to use the next
port up and will keep trying up to 10 ports up.
</p>
<h4>Port Mode:</h4>
<figure>
<img alt="Port Mode Dropdown" src="/images/osc-portmode.png">
<figcaption>
Port Mode Dropdown
</figcaption>
</figure>
<p>
This drop down allows the choice of Auto or Manual outbound port
setting. The Auto port mode, will send OSC messages back to
the port messages from that surface are received from. This setting
allows two surfaces on the same IP to operate independently. However,
there are a number of OSC control surfaces that do not monitor the
same port they send from and in fact may change ports they send from
as well. Manual allows the outgoing port, the port the surface will
receive on, to be manually set. In Manual port mode only one control
surface per IP can work. Most phone or tablet OSC controllers like
touchOSC or Control need Manual port mode. More than one controller
can be used so long as each has it's own IP.
</p>
<h4>Manual Port:</h4>
<p>
This is an Entry box for setting the outgoing port when in
Manual port mode.
</p>
<h4>Bank Size:</h4>
<p>
This sets the default bank size for the next surface to send a
<em>/set_surface/*</em> OSC message. Bank size 0 (the default) sets
no banking and allows controlling all strips included in strip_types
at once. The entry area will be bright blue for a port that is not
valid (ports below 1024 or 3819).
</p>
<h4>Send Page Size:</h4>
<p>
This allows setting the size of pages for sends. In the case there are
more sends than controls. A size of 0 is the same as no paging and
all sends are directly controllable.
</p>
<h4>Plugin Page Size:</h4>
<p>
This allows setting the size of pages for plugin controls. Some
plugins have hundreds of controls and so it may be necessary to page
the plugin controls to a limited number of physical controls. A size
of 0 is the same as no paging and all plugin controls are directly
controllable.
</p>
<h4>Gain Mode:</h4>
<figure>
<img alt="Gain Mode Dropdown" src="/images/osc-gainmode.png">
<figcaption>
Gain Mode Dropdown
</figcaption>
</figure>
<p>
Sets the faders (and sends faders) feedback math to position where a
value between 0 and 1 represents the fader position of the same fader
in the mixer GUI or dB where the feedback from fader movement will be
returned as a dB value. When the Gain Mode is set to position, the
/*/name feedback for the channel will show dB values in text while the
fader is being adjusted and then return the name text.
</p>
<h4>Debug:</h4>
<figure>
<img alt="Debug Mode Dropdown" src="/images/osc-debug.png">
<figcaption>
Debug Mode Dropdown
</figcaption>
</figure>
<p>
For debugging purposes this allows logging either all OSC messages
Ardour receives or invalid messages received or none.
</p>
<h4>Preset:</h4>
<figure>
<img alt="Preset Loader" src="/images/osc-preset.png">
<figcaption>
Preset Loader
</figcaption>
</figure>
<p>
Ardour now allows the use of preset settings. The default settings
used are the settings from the last session or the factory defaults
the first time OSC is enabled. As soon as any of these settings are
changed, the Preset will change to "User" and the new settings will be
save to the osc directory in the
<a href="@@files-and-directories-ardour-knows-about">Ardour configuration directory</a> as
<em>user.preset</em>. This preset file can be renamed for future use.
It is suggested to also change the name value inside to avoid confusion
in the preset listing. Ardour will ship with some of it's own presets
that go with some popular OSC control and map combinations.
</p>
<h4>Clear OSC Devices</h4>
<p class="note">
This button has been removed after Ardour 5.10. Instead this action
is triggered by any change in the settings.
</p>
<p>
This button clears operating device profiles so that Ardour will reset
all devices settings to use the new defaults from changed settings. a
device may still override these new settings with the /set_surface set
of commands. The reason for setting defaults settings is that some OSC
controllers are not able to send more than one parameter at a time and
so having correct defaults allows one "Connect" button rather than 4.
</p>
<h3>Default Strip Types tab</h3>
<figure>
<img alt="The Default Strip Types tab" src="/images/osc-strip-types.png">
<figcaption>
The Default Strip Types tab
</figcaption>
</figure>
<p>
This allows selecting which of Ardour's mixer strips will be available
for control. The Factory default is all strips except master, monitor
and hidden strips. If it is desired to only see input tracks the
others can be deselected. It is also possible to change these settings
from the control surface. A set of buttons could select showing only
inputs or only busses. If a group is selected in the GUI then showing
only selected strips will show only that group. Showing hidden tracks
is handy for cases where a groups of tracks that grouped to a bus or
controlled by a VCA are hidden, but one of those tracks needs a tweak.
</p>
<h3>Default Feedback tab</h3>
<figure>
<img alt="The Default Feedback tab" src="/images/osc-feedbackdefault.png">
<figcaption>
The Default Feedback tab
</figcaption>
</figure>
<p>
This allows setting up which controls provide feedback. The Factory
default is none. If the controller is unable to receive feedback, this
should be left blank. In the case of metering, Metering as a LED strip
only works if Metering as a Float is disabled.
</p>