334 lines
13 KiB
HTML
334 lines
13 KiB
HTML
<ul>
|
||
<li>
|
||
<a href="#bcf2000">Behringer BCF-2000</a>
|
||
</li>
|
||
<li>
|
||
<a href="#xtouch">Behringer X-Touch</a>
|
||
</li>
|
||
<li>
|
||
<a href="#compact">Behringer X-Touch Compact</a>
|
||
</li>
|
||
<li>
|
||
<a href="#mini">Behringer X-Touch Mini</a>
|
||
</li>
|
||
</ul>
|
||
<h2 id="bcf2000">Behringer BCF-2000 Faders Controller</h2>
|
||
<figure>
|
||
<a href="/images/BCF2000.png"><img style="max-width:500px;" alt="Digramatic Image of the BCF2000" src="/images/BCF2000.png"></a>
|
||
<figcaption>
|
||
Digramatic Image of the BCF2000 (click for a full-size view)
|
||
</figcaption>
|
||
</figure>
|
||
|
||
<p>
|
||
The Behringer BCF-2000 Fader Controller is a control surface with 8 motorized
|
||
faders, 8 rotary encoders and 30 push buttons. The device is a class
|
||
compliant USB Midi Interface and also has standard Midi DIN IN/OUT/THRU ports.
|
||
The device has included a Mackie/Logic Control Emulation Mode since firmware v1.06.
|
||
Any devices with a firmware older than v1.06 will require an update before
|
||
Mackie Control Emulation works as described here.
|
||
</p>
|
||
|
||
<figure>
|
||
<a href="/images/BCF2000-EG.png"><img style="max-width:500px;" alt="Digramatic Image of the BCF2000 in Edit Global Mode" src="/images/BCF2000-EG.png"></a>
|
||
<figcaption>
|
||
Digramatic Image of the BCF2000 in Edit Global Mode (click for a full-size view)
|
||
</figcaption>
|
||
</figure>
|
||
|
||
<p>
|
||
In order to put the controller into Mackie/Logic control mode, the unit must be
|
||
turned on while holding the third button from the left in the top most row
|
||
of buttons (under the rotary encoder row). The button must be held down until <kbd class="input">EG</kbd>
|
||
or edit global mode is displayed on the LCD screen of the unit. The global parameters
|
||
can then be edited using the 8 rotary encoders in the top row.
|
||
</p>
|
||
|
||
<ul>
|
||
<li>
|
||
Encoder #1 sets the operating mode and should be set to <kbd class="input">U-1</kbd> or
|
||
USB mode 1 if using with a USB cable connection.
|
||
</li>
|
||
<li>
|
||
Encoder #3 sets the foot switch mode and should most likely be set to
|
||
<kbd class="input">Auto</kbd> to detect how the foot switch is wired.
|
||
</li>
|
||
<li>
|
||
Encoder #5 sets the device id, if you are using only 1 device the id
|
||
should be set to <kbd class="input">ID 1</kbd>. If you are using multiple BCF/BCR2000 each
|
||
device is required to be set up sequentially and one at a time.
|
||
</li>
|
||
<li>
|
||
Encoder #7 controls the MIDI <dfn>Dead Time</dfn> or the amount of milliseconds
|
||
after a move has been made that the device ignores further changes, this
|
||
should be set to <kbd class="input">100</kbd>.
|
||
</li>
|
||
<li>
|
||
Encoder #8 controls the MIDI message <dfn>Send Interval</dfn> in milliseconds
|
||
and should be set to <kbd class="input">10</kbd>
|
||
</li>
|
||
</ul>
|
||
|
||
<p>
|
||
To exit the <kbd class="input">EG</kbd> mode press the <kbd class="button">Exit</kbd> button. The device is now
|
||
ready to use with Ardour.
|
||
</p>
|
||
|
||
<h3>Modes of Operation</h3>
|
||
|
||
<figure>
|
||
<a href="/images/BCF2000-Modes.png"><img style="max-width:500px;" alt="Digramatic Image of the BCF2000 Control Modes" src="/images/BCF2000-Modes.png"></a>
|
||
<figcaption>
|
||
Digramatic Image of the BCF2000 Control Modes (click for a full-size view)
|
||
</figcaption>
|
||
</figure>
|
||
|
||
<p>
|
||
The four buttons arranged in a rectangle and located under the Behringer logo
|
||
are the mode selection buttons in Logic Control Emulation Mode,
|
||
currently Ardour has implemented support for two of these modes.
|
||
</p>
|
||
<p>
|
||
The surface can be broken into 8 groups of controls:
|
||
</p>
|
||
|
||
<ol>
|
||
<li>The rotary encoders at the top of the device</li>
|
||
<li>The first row of buttons under the encoders</li>
|
||
<li>The second row of buttons under the encoders</li>
|
||
<li>The row of motorized faders<li>
|
||
<li>The group of 4 buttons at the top right that will be
|
||
referred to here as the <dfn>Shift Group</dfn></li>
|
||
<li>The group of 4 buttons under the <dfn>Shift Group</dfn>
|
||
referred to here as the <dfn>Mode Group</dfn></li>
|
||
<li>The group of 2 buttons under the <dfn>Mode Group</dfn>
|
||
referred to here as the <dfn>Select Group</dfn></li>
|
||
<li>The group of 4 buttons under the <dfn>Select Group</dfn>
|
||
referred to here as the <dfn>Transport Group</dfn></li>
|
||
</ol>
|
||
|
||
<h3>Mixer Pan Mode</h3>
|
||
|
||
|
||
<figure>
|
||
<a href="/images/BCF2000-Pan.png"><img style="max-width:500px;" alt="Digramatic Image of the BCF2000 Control Modes" src="/images/BCF2000-Pan.png"></a>
|
||
<figcaption>
|
||
Digramatic Image of the BCF2000 Control Modes (click for a full-size view)
|
||
</figcaption>
|
||
</figure>
|
||
|
||
<p>
|
||
This is the standard work mode that organizes the control surface to emulate
|
||
a standard mixer layout where controls for each track/bus are arranged vertically.
|
||
The order of the faders is either controlled by the order of the tracks in the
|
||
mixer or can be set manually by the user.
|
||
</p>
|
||
|
||
<table class="dl">
|
||
<tr><th>Encoders</th>
|
||
<td>Mixer Pans. The red LEDs show the amount of pan left or right</td></tr>
|
||
<tr><th>First Row of Buttons</th>
|
||
<td>Mixer Mutes. The button led lights up if the track is currently muted</td></tr>
|
||
<tr><th>Second Row of Buttons</th>
|
||
<td>Select Active Track/Bus. Currently selected track/bus is indicated by the button led</td></tr>
|
||
<tr><th>Faders</th>
|
||
<td>Mixer Gains</td></tr>
|
||
<tr><th>Shift Group</th>
|
||
<td>
|
||
<ul>
|
||
<li>The top and bottom left buttons are simply shifts to change the function of other buttons.</li>
|
||
<li>The top right is the <dfn>Fine Control</dfn> button that allows the increment values sent by
|
||
by rotary encoders and faders to be a small value for more precise editing. This button
|
||
can also act as a shift button.</li>
|
||
<li>The bottom right is the <dfn>Global Shift</dfn> button that allows you to change back to the
|
||
standard Mixer Pan view from other views and modes. This button can also act as a shift button.</li>
|
||
</ul>
|
||
</td></tr>
|
||
<tr><th>Mode Group</th>
|
||
<td>
|
||
<ul>
|
||
<li>The top two buttons functions are not currently implemented in Ardour.</li>
|
||
<li>The bottom left button sets the device to <dfn>Pan</dfn> mode and should currently be lit</li>
|
||
<li>The bottom right button sets the device to <dfn>Send</dfn> mode but will only allow the switch
|
||
if the currently selected track/bus has a send or sends to control.</li>
|
||
</ul>
|
||
</td></tr>
|
||
<tr><th>Select Group</th>
|
||
<td>
|
||
In this mode they function as bank select left and right. If the current session has more than 8 tracks
|
||
the next set of 8 tracks is selected with the right button and the faders will move to match the
|
||
current gain settings of that bank of 8 tracks/busses. If the last bank contains less than 8
|
||
tracks/busses the unused faders will move to the bottom and the pan lights will all turn
|
||
off. An unlimited amount of tracks can be controlled with the device.
|
||
</td></tr>
|
||
<tr><th>Transport Group</th>
|
||
<td>
|
||
<ul>
|
||
<li>The upper left button controls <dfn>Rewind</dfn>.</li>
|
||
<li>The upper right button controls <dfn>Fast Forward</dfn></li>
|
||
<li>The lower left button controls <dfn>Stop</dfn></li>
|
||
<li>The lower right button controls <dfn>Play</dfn></li>
|
||
</ul>
|
||
</td></tr>
|
||
</table>
|
||
|
||
<h3>Send Mode</h3>
|
||
|
||
<figure>
|
||
<a href="/images/BCF2000-Send.png"><img style="max-width:500px;" alt="Digramatic Image of the Send Mode" src="/images/BCF2000-Send.png"></a>
|
||
<figcaption>
|
||
Digramatic Image of the Send Mode (click for a full-size view)
|
||
</figcaption>
|
||
</figure>
|
||
|
||
<p>
|
||
Send mode allows for the top row of encoders to control the sends for a selected channel.
|
||
One interesting option is to flip the controls from the encoders to the faders by pressing
|
||
the <kbd class="button">shift 1</kbd> button and the <kbd class="button">global view</kbd> button at the same time.
|
||
</p>
|
||
|
||
<table class="dl">
|
||
<tr><th>Encoders</th>
|
||
<td>
|
||
In send mode, the encoders control sends from left to right instead of mixer pans.
|
||
If there are less than 8 sends the behavior of the encoder will be to continue controlling
|
||
the mixer pan. Visually it's indicated by the change in the LED from originating at the 12
|
||
o'clock position to originating at the 7 o'clock position. If <kbd class="button">FLIP</kbd> is pressed
|
||
the encoder will control the mixer gain for the selected track/bus.
|
||
</td></tr>
|
||
<tr><th>First row of buttons</th>
|
||
<td>No Change</td></tr>
|
||
<tr><th>Second row of buttons</th>
|
||
<td>No Change.</td></tr>
|
||
<tr><th>Faders</th>
|
||
<td>
|
||
No change unless <kbd class="button">FLIP</kbd>is pressed then it controls the send for the selected track/bus.
|
||
</td></tr>
|
||
<tr><th>Shift Group</th>
|
||
<td>No Change</td></tr>
|
||
<tr><th>Select Group</th>
|
||
<td>No Change</td></tr>
|
||
<tr><th>Transport Group</th>
|
||
<td>No Change</td></tr>
|
||
</table>
|
||
|
||
<h3>Mixer Pan While Holding <kbd class="button">Shift 1</kbd></h3>
|
||
|
||
<figure>
|
||
<a href="/images/BCF2000-Shift1.png"><img style="max-width:500px;" alt="Digramatic Image of the Mixer Mode while holding down shift 1" src="/images/BCF2000-Shift1.png"></a>
|
||
<figcaption>
|
||
Digramatic Image of the Mixer Mode while holding down <kbd class="button">Shift 1</kbd>
|
||
</figcaption>
|
||
</figure>
|
||
|
||
<p>
|
||
The operations of various buttons change while holding down the <kbd class="button">Shift 1</kbd> button:
|
||
</p>
|
||
|
||
<table class="dl">
|
||
<tr><th>Encoders</th>
|
||
<td>No Change</td></tr>
|
||
<tr><th>First row of buttons</th>
|
||
<td>These now control the Soloing of each track/bus in the current bank</td></tr>
|
||
<tr><th>Second row of buttons</th>
|
||
<td>These now control the Enable Record for each track</td></tr>
|
||
<tr><th>Faders</th>
|
||
<td>No Change</td></tr>
|
||
<tr><th>Shift Group</th>
|
||
<td>No change</td></tr>
|
||
<tr><th>Mode Group</th>
|
||
<td>No Change</td></tr>
|
||
<tr><th>Select Group</th>
|
||
<td>
|
||
These now change the current bank of tracks being controlled over by
|
||
one. So if tracks 1-8 where controlled, pushing the <kbd class="button">right</kbd> button will change the
|
||
controlled tracks to 2-9, and pressing the <kbd class="button">left</kbd> would then shift back to controlling tracks 1-8.
|
||
</td></tr>
|
||
<tr><th>Transport Group</th>
|
||
<td>
|
||
<ul>
|
||
<li>The upper left now controls turning on and off <dfn>Loop</dfn> mode.</li>
|
||
<li>The upper right now toggles <dfn>Click</dfn>.</li>
|
||
<li>The lower left toggles <dfn>Replace</dfn>.</li>
|
||
<li>The lower right toggles <dfn>Global Record</dfn>.</li>
|
||
</ul>
|
||
</td></tr>
|
||
</table>
|
||
|
||
<h3>Mixer Pan While Holding <kbd class="button">Shift 2</kbd></h3>
|
||
|
||
<figure>
|
||
<a href="/images/BCF2000-Shift2.png"><img style="max-width:500px;" alt="Digramatic Image of the Mixer Mode while holding down shift 2" src="/images/BCF2000-Shift2.png"></a>
|
||
<figcaption>
|
||
Digramatic Image of the Mixer Mode while holding down <kbd class="button">Shift 2</kbd>
|
||
</figcaption>
|
||
</figure>
|
||
|
||
<p>
|
||
The operations of various buttons change while holding down the <kbd class="button">Shift 2</kbd> button:
|
||
</p>
|
||
|
||
<table class="dl">
|
||
<tr><th>Encoders</th>
|
||
<td>No Change</td></tr>
|
||
<tr><th>First row of buttons</th>
|
||
<td>FIX ME</td></tr>
|
||
<tr><th>Second row of buttons</th>
|
||
<td>These now control setting up different <dfn>Views</dfn>. See below for more info</td></tr>
|
||
<tr><th>Faders</th>
|
||
<td>No Change</td></tr>
|
||
<tr><th>Shift Group</th>
|
||
<td>No change</td></tr>
|
||
<tr><th>Mode Group</th>
|
||
<td>No Change</td></tr>
|
||
<tr><th>Select Group</th>
|
||
<td>Left button controls <dfn>Undo</dfn>(FIXME: NEEDS VERIFICATION)</td></tr>
|
||
<tr><th>Transport Group</th>
|
||
<td>FIX ME</td></tr>
|
||
</table>
|
||
|
||
<h3>Views</h3>
|
||
|
||
<figure>
|
||
<a href="/images/BCF2000-Views.png"><img style="max-width:500px;" alt="Digramatic Image of the LED display for different Views" src="/images/BCF2000-Views.png"></a>
|
||
<figcaption>
|
||
Digramatic Image of the LED display for different Views
|
||
</figcaption>
|
||
</figure>
|
||
|
||
<h2 id="xtouch">Behringer X-Touch</h2>
|
||
<p>
|
||
The Behringer X-Touch is a direct emulation of the Mackie Control and has all the
|
||
buttons the Mackie device does. There is a "Behringer X-Touch" map included with
|
||
Ardour. The X-Touch can be connected to the computer with USB or through a MIDI port.
|
||
Using USB keeps MIDI ports free for other uses. The ethernet port uses RTP MIDI
|
||
which should show up as MIDI devices on MacOS computers.
|
||
</p>
|
||
|
||
<h2 id="compact">Behringer X-Touch Compact</h2>
|
||
<p>
|
||
The Behringer X-Touch Compact has a Mackie Control mode. From the device manual:</p>
|
||
<p class="note">"To switch between standard operating mode and MC (Mackie Control) mode, press
|
||
and hold down the MC button in the bottom left corner, and then turn on
|
||
the unit’s power switch. Keep holding down the MC button until the MC MODE LED
|
||
lights continuously to show that the unit is in MC mode."</p>
|
||
<p>
|
||
There is a "Behringer X-Touch Compact" map included with Ardour. The X-Touch can be
|
||
connected to the computer with USB or through a MIDI port. Using USB keeps MIDI ports
|
||
free for other uses.
|
||
</p>
|
||
|
||
<p>
|
||
The Behringer X-Touch Compact has fewer controls than the mackie control and therefore
|
||
less function as well. See pages 19-21 of the Behringer X-Touch Compact Quick Start Guide
|
||
For an explanation of what controls on the Compact map to which Makie Control buttons.
|
||
</p>
|
||
<h2 id="mini">Behringer X-Touch Mini</h2>
|
||
<p>
|
||
The Behringer X-Touch Mini says it can emulate Mackie control as well. At present there
|
||
is no map for the Mini. The control layout in Mackie Control mode is shown below.
|
||
</p>
|
||
<img alt="X-Touch Mini MC mode layout" src="/images/xtouch-mini-mcp.png">
|
||
|
||
<p class=fixme>Missing content</p>
|