manual/_manual/14_signal-routing.html
2017-01-03 18:03:08 +01:00

49 lines
1.7 KiB
HTML

---
layout: default
title: Signal Routing
---
<p>
Ardour does most of its internal <dfn>signal routing</dfn> via JACK:
all track and bus inputs and outputs are JACK ports, as are sends and
inserts, which means they can be tapped into by other JACK clients.
Only the signal flow inside a track or bus (i.e. from <a
href="/working-with-plugins/processor-box/">processor to processor</a>) is
handled internally.<br />
By default, Ardour will create the following connections for you:
</p>
<ul>
<li>
<dfn>Track inputs</dfn> are optionally auto-connected to hardware inputs, in round robin
order, depending on the setting you chose in the
<a href="/working-with-sessions/new-session-dialog/"><kbd
class="menu">Session &gt; New Session</kbd> dialog</a>.
</li>
<li>
<dfn>Bus inputs</dfn> are left disconnected.
</li>
<li>
The number of <dfn>track and bus outputs</dfn> are equal to the number
of inputs of the master bus.
</li>
<li>
Track and bus outputs are always auto-connected to the master bus inputs.
</li>
<li>
Master bus outputs are connected to hardware outputs.
</li>
</ul>
<p>
This configuration is sufficient to do basic tracking and playback of many
sessions without any adjustment by the user. If you are using Ardour and
start to change these connections, be certain that you have a good reason
to do so &mdash; it is generally not necessary and often leads to problems.
</p>
<p>
However, for many workflows during mixing, more complicated signal routing
is required. Ardour offers many possibilties for connecting things in the
way you may need or want them.
</p>
{% children %}