188 lines
6.3 KiB
HTML
188 lines
6.3 KiB
HTML
---
|
|
layout: default
|
|
title: Stereo Panner
|
|
---
|
|
|
|
<p>
|
|
The default stereo panner distributes 2 inputs to 2 outputs. Its
|
|
behaviour is controlled by two parameters, width and position. The
|
|
default settings for the stereo panner
|
|
are width=100%>, position=center (L=50%,
|
|
R=50%). This panner assumes that you have 2 uncorrelated,
|
|
independent signals that you wish to distribute to two outputs.
|
|
</p>
|
|
<div class="well">
|
|
<p>
|
|
With the default values it is not possible to alter the position,
|
|
since the width is already spread entirely across both outputs. To
|
|
alter the position, you must first reduce the width.
|
|
</p>
|
|
</div>
|
|
|
|
<h2>Stereo Panner User Interface</h2>
|
|
|
|
<img src="/images/stereo-panner-annotated.png" alt=""/>
|
|
|
|
<p>
|
|
The panner user interface consists of 3 elements, divided between
|
|
the top and bottom half. Click and/or drag in the top half to
|
|
control position; click and/or drag in the bottom half to control
|
|
width (see below for details).
|
|
<p>
|
|
<p>
|
|
In the top half is the position indicator, which shows where the
|
|
center of the stereo image is relative to the left and right
|
|
edges. When this is the middle of the panner, the stereo image is
|
|
centered between the left and right outputs. When it all the way to
|
|
the left, the stereo image collapses to just the left speaker.
|
|
</p>
|
|
<p>
|
|
In the bottom half are two signal indicators, one marked "L" and the
|
|
other "R". The distance between these two shows the width of the
|
|
stereo image. If the width is reduced to zero, there will only be a
|
|
single signal indicator marked "M" (for mono), and whose color will
|
|
change to indicate the special state.
|
|
</p>
|
|
|
|
<p>
|
|
It is possible to invert the outputs (see below) so that whatever
|
|
would have gone to the right channel goes to the left and vice
|
|
versa. When this happens, the entire movable part of the panner
|
|
changes color to indicate clearly that this is the case.
|
|
</p>
|
|
|
|
<h3>Position vs. L/R</h3>
|
|
|
|
<p>
|
|
Although the implementation of the panner uses the "position"
|
|
parameter, when the user interface displays it numerically, it shows a pair of numbers that
|
|
will be familiar to most audio engineers.
|
|
</p>
|
|
|
|
<table>
|
|
<tr><th>Position</th><th>L/R</th><th>English</th></tr>
|
|
<tr><td>0</td><td>L=50% R=50%</td><td>signal image is midway between
|
|
left and right speakers</td></tr>
|
|
|
|
<tr><td>-1</td><td>L=100% R=0%</td><td>signal image is entirely
|
|
at the left speaker </td></tr>
|
|
|
|
<tr><td>1</td><td>L=0% R=100%</td><td>signal image is entirely
|
|
at the right speaker</td></tr>
|
|
</table>
|
|
|
|
<p>
|
|
One way to remember this sort of convention is that the middle of the
|
|
USA is not Kansas, but "Los Angeles: 50% New York: 50%".
|
|
</p>
|
|
|
|
<h2>Examples In Use</h2>
|
|
|
|
<table>
|
|
<tr><th>Appearance</th><th>Settings</th></tr>
|
|
<tr><td><img src="/images/stereo-panner.png"></td><td>Width=100%,
|
|
L=50 R=50</td></tr>
|
|
<tr><td><img src="/images/stereo-panner-zero.png"></td><td>Width=0%,
|
|
L=50 R=50</td></tr>
|
|
<tr><td><img src="/images/stereo-panner-inverted.png"></td><td>Width=-100%, Position = 0 (center)</td></tr>
|
|
<tr><td><img src="/images/stereo-panner-right.png"></td><td>Width=36%,
|
|
L=44 R=56</td></tr>
|
|
<tr><td><img src="/images/stereo-panner-hard-right.png"></td><td>Width=0%,
|
|
L=0 R=100</td></tr>
|
|
</table>
|
|
|
|
<h2>Using the mouse</h2>
|
|
|
|
<p>Mouse operations in the upper half of the panner adjust the position
|
|
parameter, constrained by the current width setting.
|
|
</p>
|
|
|
|
<p>Mouse operations in the lower half of the panner adjust the width
|
|
parameter, constrained by the current position setting.
|
|
</p>
|
|
|
|
<p>To change the position smoothly, press the right button and drag
|
|
within the top half of the panner, then release. The position will
|
|
be limited by the current width setting. <em>Note: you do not need
|
|
to grab the position indicator in order to drag</em>
|
|
</p>
|
|
|
|
<p>To change the width smoothly, press the right button and drag
|
|
within the lower half of the panner, then release. The width will be
|
|
limited by the current position setting.<em>Note: you do not need to
|
|
grab the L/R indicators in order to drag</em>
|
|
</p>
|
|
|
|
<dl class="faq">
|
|
|
|
<dt>Reset to defaults</dt>
|
|
<dd>Click <key class="mod3">right button</key></dd>
|
|
|
|
<dt>Change to a "hard left"</dt>
|
|
<dd>Double click <key class="mod2">right button</key> in the upper left half
|
|
of the panner</dd>
|
|
|
|
<dt>Change to a "hard right"</dt>
|
|
<dd>Double click <key class="mod2">right button</key> in the upper right half
|
|
of the panner</dd>
|
|
|
|
<dt>Move position as far left as possible, given width</dt>
|
|
<dd>Double click <key>right button</key> in the upper left half of the
|
|
panner</dd>
|
|
|
|
<dt>Move position as far right as possible, given width</dt>
|
|
<dd>Double click <key>right button</key> in the upper right half of the
|
|
panner</dd>
|
|
|
|
<dt>Set the position to center</dt>
|
|
<dd>Click <key>right button</key> in the upper middle of the panner</dd>
|
|
|
|
<dt>Reset to maximum possible width</dt>
|
|
<dd>Double click <key>right button</key> on the lower left side</dd>
|
|
|
|
<dt>Invert (flip channel assignments)</dt>
|
|
<dd>Double click <key>right button</key> on the lower right side</dd>
|
|
|
|
<dt>Set width to 0°</dt>
|
|
<dd>Double click <key>right button</key> in the lower middle</dd>
|
|
</dl>
|
|
|
|
<h4>Keyboard bindings</h4>
|
|
|
|
When the pointer is within a stereo panner user interface, the following
|
|
keybindings are available to operate on that panner:
|
|
|
|
<dl>
|
|
<dt><key>↑</key> / <key class="mod1">↑</key></dt>
|
|
<dd>increase width by 1° / 5°</dd>
|
|
<dt><key>↓</key> / <key class="mod1">↓</key></dt>
|
|
<dd>decrease width by 1° / 5°</dd>
|
|
<dt><key>←</key> / <key class="mod1">←</key></dt>
|
|
<dd>move position 1° / 5° to the left</dd>
|
|
<dt><key>→</key> / <key class="mod1">→</key></dt>
|
|
<dd>move position 1° / 5° to the right</dd>
|
|
<dt><key>0</key></dt>
|
|
<dd>reset position to center</dd>
|
|
<dt><key class="mod2">↑</key></dt>
|
|
<dd>reset width to 180° (100%)</dd>
|
|
</dl>
|
|
|
|
<h4>Using the scroll wheel/touch scroll</h4>
|
|
|
|
When the pointer is within a stereo panner user interface, the scroll
|
|
wheel may be used as follows:
|
|
|
|
<dl>
|
|
<dt>left / <key class="mod1">left</key></dt>
|
|
<dd>increase width by 1° / 5°</dd>
|
|
|
|
<dt>right / <key class="mod1">right</key></dt>
|
|
<dd>decrease width by 1° / 5°</dd>
|
|
|
|
<dt>up / <key class="mod1">up</key></dt>
|
|
<dd>move position 1° / 5° to the left</dd>
|
|
|
|
<dt>down / <key class="mod1">down</key></dt>
|
|
<dd>move position 1° / 5°to the right</dd>
|
|
</dl>
|