120 lines
6.2 KiB
HTML
120 lines
6.2 KiB
HTML
|
|
<figure class="right">
|
|
<img src="/images/bus-mixer-strip.png" alt="A bus mixer strip">
|
|
</figure>
|
|
|
|
<p>
|
|
An Ardour bus can be considered a virtual track, as in a track that doesn't
|
|
have a playlist (so, no regions). Its use is to "group" some audio signals to
|
|
be treated the same way. One simple use case is to group all the audio tracks
|
|
containing the different drums of a drumkit. Routing all the drums tracks
|
|
outputs to a bus allows, once the different levels amongst the drums have been
|
|
set, to adjust the global level of the drumkit in the mix.
|
|
</p>
|
|
<p>
|
|
Bus usage goes way beyond this simple example though: busses, as tracks, can
|
|
receive plugins for common audio treatment, and be routed themselves as needed.
|
|
This makes for a very useful tool that is very commonly used both for musical
|
|
purposes and computing ones: instead of using e.g. ten discrete delay plugins on
|
|
ten different tracks, busses are often used as receivers of <a
|
|
href="@@aux-sends">sends</a>, and only one delay plugin is used on this bus,
|
|
reducing the processing power needed.
|
|
</p>
|
|
|
|
<h2>Audio Busses vs MIDI Busses</h3>
|
|
|
|
<p>
|
|
Ardour supports two types of busses: Audio and MIDI. A MIDI bus differs from an
|
|
audio bus just by:
|
|
<p>
|
|
<ul>
|
|
<li>its input (which is midi, as shown by the red signal lines in the processor box) instead of <em>n</em> audio</li>
|
|
<li>the fact that an instrument can be placed on it at creation time, whereas it can't easily be done for an audio bus</li>
|
|
<li>as for tracks, the MIDI bus doesn't have a trim knob or invert phase button(s).</li>
|
|
</ul>
|
|
<p>
|
|
MIDI busses provide a particularly efficient workflow for virtual drumkits where
|
|
the arrangement uses different MIDI tracks. Moreover, busses with both Audio and
|
|
MIDI inputs are well suited for vocoders and similar plugins, where a MIDI
|
|
signal controls an audio one.
|
|
</p>
|
|
<p class="note">
|
|
Adding any audio input to a MIDI bus transforms it into an audio bus.
|
|
</p>
|
|
|
|
<h2>Description</h2>
|
|
<p>
|
|
Busses look and behave exactly like tracks, so they share nearly <a href="@@audiomidi-mixer-strips">
|
|
all of their controls</a>. The differences are:
|
|
</p>
|
|
<ul>
|
|
<li>as the busses dont have a playlist (and cannot host any media), they can't be recorded on. The recording controls are not present</li>
|
|
<li>an <kbd class="menu">Aux</kbd> button replaces these controls.</li>
|
|
</ul>
|
|
<p>
|
|
Clicking the <kbd class="menu">Aux</kbd> button makes every track that sends a
|
|
signal to this bus through <a href="@@aux-sends">Aux sends</a> blink in
|
|
turquoise. Right clicking this button brings up a menu:
|
|
</p>
|
|
<table class="dl">
|
|
<tr><th>Assign all tracks (prefader)</th><td>Creates an Aux Send in every track, to this bus. The send is placed just before the fader</td></tr>
|
|
<tr><th>Assign all tracks and busses (prefader)</th><td>Creates an Aux Send in every track and every bus, to this bus. The send is placed just before the fader</td></tr>
|
|
<tr><th>Assign all tracks (postfader)</th><td>Same as above, but the send is placed just after the fader</td></tr>
|
|
<tr><th>Assign all tracks and busses (postfader)</th><td>Same as above, with tracks and busses</td></tr>
|
|
<tr><th>Assign selected tracks (prefader)</th><td>Same as for all tracks, but only applies to the selected tracks</td></tr>
|
|
<tr><th>Assign selected tracks and busses (prefader)</th><td>Same as for all tracks and busses, but only applies to the selected tracks and busses</td></tr>
|
|
<tr><th>Assign selected tracks (postfader)</th><td>Same as above, but the send is placed just after the fader</td></tr>
|
|
<tr><th>Assign selected tracks and busses (postfader)</th><td>Same as above, with tracks and busses</td></tr>
|
|
<tr><th>Set sends gain to -inf</th><td>For all the sends to this bus, put the send fader to −∞ so no signal is sent</td></tr>
|
|
<tr><th>Set sends gain to 0dB</th><td>For all the sends to this bus, put the send fader at the default position, 0dB (100% of th signal is sent)</td></tr>
|
|
</table>
|
|
|
|
<h2>Connecting a track to a bus</h2>
|
|
<p>
|
|
Depending on the user's workflow and the way busses are used, two possibilities exists:
|
|
</p>
|
|
|
|
<h3>Connecting a track to a bus via its outputs</h3>
|
|
|
|
<img class="left" src="/images/connecting_bus_output.png" alt="Connecting a bus through a track's outputs">
|
|
<p>
|
|
Connecting the output(s) of a track to the input(s) of the bus sends
|
|
<em>all</em> the audio/MIDI to the bus. In the mixer strip, select (at the
|
|
bottom) the OUTPUT button (often, by default, "Master"), and in the list,
|
|
choose the input of a bus. Note that only the bus able to receive this output
|
|
will show up, e.g. a mono bus wont be able to be connected to the output of a
|
|
stereo track).
|
|
</p>
|
|
<p>
|
|
Obviously, doing so will (by default) disconnect the output from the Master's
|
|
input, which means all the audio/MIDI will be routed to the bus. For more
|
|
complex routing, the OUTPUT button allows to show the <kbd class="menu">Routing
|
|
Grid</kbd> that allows to plug the output of the track to multiple outputs at
|
|
once, be it busses, tracks, Master… The button will then reflect these
|
|
multiple connections by showing a <em>*number*</em>, number being the number of
|
|
connections made in the routing grid.
|
|
</p>
|
|
|
|
<h3>Connecting a track to a bus via Sends</h3>
|
|
|
|
<img class="left" src="/images/connecting_bus_send.png" alt="Connecting a bus through a send">
|
|
<p>
|
|
This allows not to interrupt the natural flow of the signal, i.e. the track will
|
|
still output to what its connected to (e.g. Master). The signal is "tapped" at
|
|
the point of insertion of the send, to be sent to the bus, by <kbd class="mouse">right</kbd>
|
|
clicking where in the signal flow the signal should be tapped, and selecting <kdb class="menu">
|
|
New Aux Send… > name_of_the_bus</kbd>.
|
|
</p>
|
|
<p>
|
|
By <kbd class="mouse">left-clicking</kbd> the send meter, it is possible to
|
|
adjust the amount of signal sent to the bus. This is often the way tracks are
|
|
connected to an effect bus, like a Delay bus.
|
|
</p>
|
|
|
|
<p class="note">
|
|
Busses can be plugged to other busses, through outputs or sends. Both example
|
|
workflows discussed previously, i.e. busses for grouping tracks and busses for
|
|
effects, can both coexist, as e.g. a "grouping" drum bus can have a send to a
|
|
reverb bus, and be connected to a compressor bus.
|
|
</p>
|