113 lines
4.7 KiB
HTML
113 lines
4.7 KiB
HTML
---
|
|
layout: default
|
|
title: OSC: Personal Monitoring Control
|
|
---
|
|
|
|
<p>
|
|
Personal monitoring can allow a performer with a smart phone to set
|
|
their personal monitor mix for a floor wedge or inear monitoring.
|
|
</p>
|
|
<h3>Setup</h3>
|
|
<p>
|
|
Some setup needs to be done in the GUI mixer window before this can
|
|
work.
|
|
</p>
|
|
<ul>
|
|
<li>
|
|
Create a bus for each performer who will have personal
|
|
monitoring. A good practice is to name the bus with the
|
|
performers name.
|
|
</li>
|
|
<li>
|
|
Connect the output of that bus to one of the audio
|
|
interface's playback ports that is not otherwise used. OSC
|
|
will now include this bus in it's list of aux buses as it
|
|
no longer has it's output connected to the Master bus.
|
|
</li>
|
|
<li>
|
|
Add an aux send to each channel the performer needs to hear
|
|
in their personal mix. Many performers only need three or
|
|
four sources to be mixed. If the performer needs to hear a
|
|
a set of inputs that are combined into a bus, adding the
|
|
aux send to that bus may make more sense than adding ten
|
|
drum channels for example.
|
|
</li>
|
|
<li>
|
|
If the performer wishes to hear effects in their monitor,
|
|
an extra send from the send bus, placing the performers aux
|
|
send after the effect or a plugin can be added in line in
|
|
the aux bus itself.
|
|
</li>
|
|
</ul>
|
|
<p>
|
|
This gives stage or studio monitoring for the performer.
|
|
</p>
|
|
|
|
<h3>The OSC commands and feedback for personal monitoring</h3>
|
|
<p>
|
|
All of the personal monitoring commands and feedback start with a
|
|
<em>/cue</em>. It is expected that a surface used as a personal
|
|
monitor control will use only <em>/cue</em> commands.
|
|
</p>
|
|
<p class="note">
|
|
The send controls and feedback all have the send id (1 to n) in line
|
|
as part of the OSC path. So the path for the second send would be
|
|
<em>/cue/send/fader/2</em> to set the level. It is considered that
|
|
most surfaces used for this will only be able to handle one parameter.
|
|
</p>
|
|
<h4>Commands</h4>
|
|
<dl class="bindings">
|
|
<dt><kbd class="osc">/cue/connect</kbd></dt>
|
|
<dd>Returns a list of aux buses.</dd>
|
|
<dt><kbd class="osc">/cue/aux <em>aux-number</em></kbd></dt>
|
|
<dd>where <em>aux-number</em> is an integer which is the aux bus
|
|
number this surface will use.</dd>
|
|
<dt><kbd class="osc">/cue/next_aux</kbd></dt>
|
|
<dd>Sets the the aux bus to one bus higher.</dd>
|
|
<dt><kbd class="osc">/cue/previous_aux</kbd></dt>
|
|
<dd>Sets the aux to one bus lower.</dd>
|
|
<dt><kbd class="osc">/cue/connect</kbd></dt>
|
|
<dd>Returns a list of aux buses.</dd>
|
|
<dt><kbd class="osc">/cue/fader <em>position</em></kbd></dt>
|
|
<dd>where <em>position</em> is a float for the position of the fader
|
|
between 0.0 and 1.0.</dd>
|
|
<dt><kbd class="osc">/cue/mute <em>state</em></kbd></dt>
|
|
<dd>where <em>state</em> is a float of 0.0 for mute off and 1.0 for mute on.</dd>
|
|
<dt><kbd class="osc">/cue/send/fader/<em>id</em> <em>position</em></kbd></dt>
|
|
<dd>where <em>position</em> is a float for the position of the fader
|
|
between 0.0 and 1.0.</dd>
|
|
<dt><kbd class="osc">/cue/send/enable/<em>id</em> <em>state</em></kbd></dt>
|
|
<dd>where <em>state</em> is a float of 0.0 for disable and 1.0 for enable.</dd>
|
|
</dl>
|
|
<h4>Feedback</h4>
|
|
<dl class="bindings">
|
|
<dt><kbd class="osc">/cue/name <em>name</em></kbd></dt>
|
|
<dd>where <em>name</em> is a string that is the name of the currently
|
|
selected aux bus.</dd>
|
|
<dt><kbd class="osc">/cue/name/<em>id</em> <em>name</em></kbd></dt>
|
|
<dd>where <em>name</em> is a string that is the name of the aux bus
|
|
that <em>id</em> belongs to.</dd>
|
|
<dt><kbd class="osc">/cue/fader <em>position</em></kbd></dt>
|
|
<dd>where <em>position</em> is a float from 0.0 to 1.0 that shows the
|
|
fader position for the selected aux bus.</dd>
|
|
<dt><kbd class="osc">/cue/mute <em>state</em></kbd></dt>
|
|
<dd>where <em>state</em> is a float of 0.0 or 1.0 that shows the state
|
|
of the mute for the selected aux bus.</dd>
|
|
<dt><kbd class="osc">/cue/signal <em>activity</em></kbd></dt>
|
|
<dd>where <em>activity</em> is a float of 0.0 or 1.0 that shows audio
|
|
activity for the selected aux bus.</dd>
|
|
<dt><kbd class="osc">/cue/send/name/<em>id</em> <em>name</em></kbd></dt>
|
|
<dd>where <em>name</em> is a string that is the name of the channel
|
|
that send <em>id</em> belongs to.</dd>
|
|
<dt><kbd class="osc">/cue/send/fader/<em>id</em> <em>position</em></kbd></dt>
|
|
<dd>where <em>position</em> is a float from 0.0 to 1.0 that is the position
|
|
for the fader for the send that <em>id</em> belongs to.</dd>
|
|
<dt><kbd class="osc">/cue/send/enable/<em>id</em> <em>state</em></kbd></dt>
|
|
<dd>where <em>state</em> is a float of 0.0 or 1.0 that is the state
|
|
of the enable for the send that <em>id</em> belongs to.</dd>
|
|
</dl>
|
|
<p>
|
|
While a fader is being adjusted, the corresponding <em>/*/name</em>
|
|
text will give the level in db.
|
|
</p>
|