manual/include/devices-using-mackielogic-control-protocol.html
2017-03-21 14:41:38 +01:00

68 lines
2.5 KiB
HTML

<p>
This will walk you through the process of configuring and using
a MIDI control surface with Ardour that uses the <dfn>Mackie Control
protocol</dfn> (MCP) or <dfn>Logic Control protocol</dfn>. Devices that
have been tested and are known to work include the SSL Nucleus, Mackie
Control Pro (plus extenders), Behringer devices in Mackie/Logic mode,
and Steinberg CMC devices.
</p>
<h2>Enabling Mackie Control in Ardour</h2>
<p>
Navigate to <kbd class="menu">Edit &gt; Preferences &gt; Control Surfaces</kbd>.
Double-click on <kbd class="menu">Mackie Control</kbd> to see the setup dialog:
</p>
<img src="" alt="Mackie Control Setup Dialog" />
<p>
From the selector at the top, choose the type of device you are using.
(<a href="@@what-to-do-if-your-device-is-not-listed">
What to do if your device is not listed</a>).
</p>
<p>
Once your setup is complete, click "OK" to close the dialog. Now click
on the enable checkbox for "Mackie Control".
</p>
<h2>Devices using ipMIDI</h2>
<p>
If you are using a device that uses ipMIDI, such as the SSL Nucleus, no
MIDI port connections are required&mdash;Ardour and your control
surface will be able to talk to each other automatically so long as
your control surface and computer are both connected to the same network.
</p>
<h2>Connecting control surface and Ardour MIDI ports</h2>
<p>
Before attempting to use a Mackie Control device that communicates via
a standard MIDI cable or a USB cable, you should ensure that
<a href="@@midi-on-linux">your Linux
MIDI environment is setup</a>.
If you are using a device that uses normal MIDI (via a standard MIDI or
USB cable), you need to connect Ardour's Mackie Control in and out ports
to the MIDI ports leading to and coming from the control surface.
</p>
<p>
When you have made these connections once, Ardour will recreate them
for you in the future, as long as you leave Mackie Control enabled.
</p>
<h2>Customizing your control surface</h2>
<p>
Every possible global Mackie Control button can be bound to any <a
href="/appendix/menu-actions-list/">
action</a> present in Ardour's GUI. Please check your control surface
page for suggestions.
</p>
<h2>Preparing your device for use with Ardour</h2>
<p>
Most interfaces will require some configuration to send and respond to
MCP.
</p>
<p class="note">
When setting up the control surface, do <em>not</em> use "Pro Tools"
mode. Pro Tools is the only DAW that still requires HUI. The rest of
world uses Mackie Control Protocol. Ardour does not support HUI at
this time.
</p>