17 lines
1.0 KiB
HTML
17 lines
1.0 KiB
HTML
---
|
|
layout: default
|
|
title: Comparing Aux Sends and Subgroups
|
|
---
|
|
|
|
|
|
|
|
<p>Auxes and Subgroups do share a common concept - they both provide a way for 1 or more tracks (or busses) to send their signal to a single bus so that common signal processing can be applied to the mix of their signals. </p>
|
|
<p>An aux send leaves the existing signal routing to the main mix inplace, and is typically used to create a separate mix to send to (for example) monitors or headphones (for performer monitor mixes). </p>
|
|
<p>Subgroups remove the original signal routing to the main mix, but create a new one that delivers the output of the subgroup bus to the main mix instead.</p>
|
|
<p>The following two diagrams compares the signal flow when using subgroups and when using aux sends:</p>
|
|
<h2>Subgroup signal routing</h2>
|
|
<p><img height="400px" src="/files/manual/a3/images/subgroup_routes.png" atl="sub group signal routing"></p>
|
|
<h2>Aux send signal routing</h2>
|
|
<p><img height="400px" src="/files/manual/a3/images/aux_routing.png" atl="aux signal routing"></p>
|
|
|