Add foldback strip documentation

This commit is contained in:
Len Ovens 2019-09-19 08:26:17 -07:00
parent 6a784fa96c
commit 976060f5e2
6 changed files with 198 additions and 4 deletions

181
include/foldback-strip.html Normal file
View File

@ -0,0 +1,181 @@
<figure class="right">
<img src="/images/foldback-gui.png" alt="The Foldback strip">
<figcaption>
The Foldback strip
</figcaption>
</figure>
<p>
The <dfn>Foldback section</dfn> is an optional feature that provides stage monitoring mixes.
Many times the main mix is used for this purpose is a setup with only the control room. However,
for a separate studio and multiple monitor mixes for in ear use, a separate set of foldback
buses provides that flexability.
</p>
<p>
These foldback buses may be mono for a stage monitor wedge or stereo to allow
inear or headphones to have different mixes for each ear, such as one's self in one
ear and the rest of the music in the other.
</p>
<p>
A foldback mixer strip can be created on the fly by creating a Foldback Bus in the same manner
as any other bus is created, from the
<kbd class="menu">Track &gt; Add Track, Bus or VCA</kbd> Window. Once at least one
Foldback bus has been created, the Foldback strip will appear in the mixer window
</p>
<p>
The <kbd class="menu">View &gt; Mixer: Show Foldback Strip</kbd> checkbox will determine if the
Foldback strip is visible. The Foldback strip appears Just to the left of the Master strip in the
Mixer window. It comprises:
</p>
<ol>
<li>Previous and Next buttons</li>
<!--li>Detach/attach control. This separates the Foldback strip into its own floating window</li-->
<li>Hide button</li>
<li>Foldback bus name button</li>
<li>Invert button</li>
<li>Show sends button</li>
<li>Send controls</li>
<li>Bus pan control</li>
<li>Processor box</li>
<li>Listen button</li>
<li>Foldback bus level control</li>
<li>Foldback bus output routing</li>
<li>Comments button</li>
</ol>
<h2>Previous and Next</h2>
<p>
The Previous button shows the previous Foldback bus in the Foldback strip.
The Next button shows the next Foldback strip. The button will be disabled
if there are no nore Foldback buses in that direction.
</p>
<h2>Hide</h2>
<p>
The hide button hides the Foldback strip when not being adjusted.
The Foldback strip can be shown again from the main menu
<kbd class="menu">View &gt; Mixer: Show Foldback Strip</kbd> item.
</p>
<h2>Name button</h2>
<p>
The name button shows the name of the current Foldback bus. It has two
menus the Foldback bus selection menu, activated with a mouse button 1
click and the context menu, activated with a mouse button 3 click. The
context menu has these items in it:
</p>
<ul>
<li><kbd class="menu">Comments</kbd> is the same as the Comments button
at the bottom of the strip</li>
<li><kbd class="menu">Outputs</kbd> shows the output routing grid</li>
<li><kbd class="menu">Save as a template</kbd> opens the template save
dialog. The template saved has the same number of channels and the same
processors but does not have any sends selected.</li>
<li><kbd class="menu">Rename</kbd> shows a rename dialog that allows the Foldback
bus name to be renamed</li>
<li><kbd class="menu">Active</kbd> toggles The active status of the current
Foldback bus</li>
<li><kbd class="menu">Protect Against Denormals</kbd> turns on denormal
protection for the current Foldback bus</li>
<li><kbd class="menu">Remove</kbd> will remove the current Foldback bus</li>
</ul>
<h2>Invert Buttons</h2>
<p>
The invert buttons (one for each channel) invert the audio signal. This
may be useful in some situations for controlling feedback. However,
proper microphone and monitor placement or the use of head phones
or in ear monitoring will be more effective.
</p>
<h2>Show Sends</h2>
<p>
Show sends allows the send levels and pan to be controlled from the
originating track by using the main fader for the track. The fader and
pan controls will change color to indicate this mode and the show sends
button will flash to indicate this mode. Changing the current Foldback
bus will disable this mode.
</p>
<h2>The Send Box</h2>
<p>
The send box shows controls for each send. There is a context menu available
by clicking mouse button 3 anywhere in the send box.
</p>
<ul>
<li><kbd class="menu">Assign Selected Tracks</kbd> creates foldback sends on each
selected track that feed the current Foldback bus</li>
<li><kbd class="menu">Assign Selected Tracks and Buses</kbd> creates foldback sends on each
selected track and bus that feed the current Foldback bus</li>
<li><kbd class="menu">Copy track/bus gains to sends</kbd> Sets the gain on the send to be the
same as the gain of the track or bus the send comes from for the current
Foldback bus</li>
<li><kbd class="menu">Set sends gain to -inf</kbd> sets the gain on all sends
for the current Foldback bus to -inf (the lowest gain possible)</li>
<li><kbd class="menu">Set sends gain to 0dB</kbd> sets the gain on all sends
for the current Foldback bus to 0dB</li>
</ul>
<h3>The Send Control Block</h3>
<p>
<img src="/images/foldback-send.png" alt="The Foldback send">
</p>
<p>
There is a send control block for every send to the current Foldback
bus. The Send control block features three controls:
</p>
<ul>
<li>The button which shows the Foldback bus' name, has an active "LED"
indicator and has a context menu (mouse button 3) with items for that
send</li>
<li>The knob, only present on a stereo Foldback bus, which controls
the pan azimuth</li>
<li>The horizontal slider which control the level input from that channel</li>
</ul>
<p>
The button LED can be clicked to enable or disable that send, the button
context menu is similar to the send box above but only for this send. It
also has a remove option to remove this send from the current foldback mix.
</p>
<h2>The Pan Control</h2>
<p>
This is just like every other track or bus strip and works the same way.
</p>
<h2>The Processor Box</h2>
<p>
This processor box is the same as on the other tracks and buses and allows
for adding things like reverb to the foldback mix without writing it to the track.
It would also be possible to add in sound from a reverb bus instead.
</p>
<h2>The Listen Button</h2>
<p>
This is only available in PFL or AFL mode as it uses the same code as
the solo on other tracks and buses. It allows the control room monitor
or headphones to hear what the performer will hear in their monitor.
</p>
<h2>The Foldback Level Knob</h2>
<p>
This controls the output level being sent to the stage monitor.
</p>
<h2>The Output Port Selector</h2>
<p>
This is similar to the output selectors on the tracks and buses. It
differs in only a few ways. First it is never automatically connected.
A Foldback bus is always meant to be directly connected to an output
device and never to master or the monitor bus. The choices shown
Therefore reflect this.
</p>
<h2>The Comment Button</h2>
<p>
Just like the track and bus comment button, this allows opening a
window to type in notes about the current foldback bus for future
reference.
</p>

View File

@ -8,4 +8,7 @@
the input signal of all tracks that are armed for recording, and playing
back the unarmed tracks.
</p>
<p>
Ardour also includes a <a href="@@foldback-strip">Foldback section</a>
to provide separate monitor mixes for each performer.
</p>

View File

@ -71,11 +71,13 @@
<tr><th>[] Show Editor Mixer</th><td>When checked, the selected tracks' mixer strip is displayed on the left of the editor window, allowing for a quick access to e.g. effects and routing</td></tr>
<tr><th>[] Show Editor List</th><td>In the Editor window, shows the <a href="@@editor-lists">Editor List</a>, giving access to a number of handy lists (regions, tracks, &hellip;)</td></tr>
<tr><th>[] Toggle Mixer List</th><td>In the Mixer view, shows the Mixer list, giving access to some handy lists (<a href="@@favorite-plugins-window">Favorite plugins</a>, <a href="@@strips-list">The Strip list</a>,&hellip;)</td></tr>
<tr><th>[] Toggle Monitor Section Visibility</th><td>If the <kbd class="option">Use monitoring section on this session</kbd> has been checked in the <a href="@@session-properties#properties-monitoring">Session Properties window</a>, shows or hides the Monitor Section in the Mixer</td></tr>
<tr><th>[] Show Measure Lines</th><td>If checked, in the Editor, shows a vertical white line at each measure start</td></tr>
<tr><th>[] Show Summary</th><td>If checked, in the Editor, shows the <a href="@@summary">Summary</a>, allowing a faster navigation in the session</td></tr>
<tr><th>[] Show Group Tabs</th><td>If checked, makes the groups visible as tabs on the left in the Editor, and on the top in the mixer</td></tr>
<!--tr><th>[] Show Measure Lines</th><td>If checked, in the Editor, shows a vertical white line at each measure start</td></tr-->
<tr><th>[] Show Marker Lines</th><td>If checked, each marker is extended across all the tracks in the editor with a line of the same color</td></tr>
<tr><th>[] Mixer: Show Mixer List</th><td>In the Mixer view, shows the Mixer list, giving access to some handy lists (<a href="@@favorite-plugins-window">Favorite plugins</a>, <a href="@@strips-list">The Strip list</a>,&hellip;)</td></tr>
<tr><th>[] Mixer: Show VCAs</th><td>In the Mixer view, shows the VCA Strips if there are any</td></tr>
<tr><th>[] Mixer: Show Monitor Section</th><td>If the <kbd class="option">Use monitoring section on this session</kbd> has been checked in the <a href="@@session-properties#properties-monitoring">Session Properties window</a>, shows or hides the Monitor Section in the Mixer</td></tr>
<tr><th>[] Mixer: Show Foldback Strip</th><td>In the Mixer view, shows the Foldback Strip if there are any</td></tr>
</table>

View File

@ -622,6 +622,14 @@ uri: ardours-interface/the-master-bus-strip
part: subchapter
---
---
title: Foldback Section
include: foldback-strip.html
link: foldback-strip
uri: ardours-interface/foldback-strip
part: chapter
---
---
title: Editor Tracks
link: track-controls

Binary file not shown.

After

Width:  |  Height:  |  Size: 19 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 3.2 KiB