ardour/manual
13
0
Fork 0
Code Pull Requests Releases Activity

Merge branch 'ovenwerks-master'

Browse Source
This commit is contained in:
Paul Davis 2015-10-08 09:28:10 -04:00
commit 356c836892
1 changed files with 10 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
_manual/22_using-control-surfaces/02_devices-using-mackielogic-control-protocol/05_working-with-extenders.html
View File

@ -25,19 +25,18 @@ menu_title: Working With Extenders
</p>
<p>
When an <code>Extenders</code> value of greater than 0 is used, extra midi
ports will appear for the extenders to be connected to. <code>mackie
control</code> will remain always the leftmost controller. The MIDI ports
for any extra controlers will be named <code>mackie control #2</code> and
up. The numbers will go from left to right.
ports will appear for the extenders to be connected to. The MIDI ports
for the controllers will be named <code>mackie control #1</code>,
<code>mackie control #2</code> and up. The numbers will go from left to
right. That is, from lowest number channel to highest.
</p>
<p>
The <code>MasterPosition</code> value is the number of positions from
left to where the master unit (with the master fader) is. So if there are
three surfaces, <code>&lt;MasterPosition value="1"/&gt;</code> will expect
the master on the left, <code>&lt;MasterPosition value="2"/&gt;</code>
would be master in the middle and <code>&lt;MasterPosition
value="3"/&gt;</code> would be master on the right. So the position
matches the port name.
The <code>MasterPosition</code> value is the port number the master unit
(with the master fader) is connected to. So if there are three surfaces,
<code>&lt;MasterPosition value="1"/&gt;</code> will expect the master on
the left, <code>&lt;MasterPosition value="2"/&gt;</code> would be master
in the middle and <code>&lt;MasterPosition value="3"/&gt;</code> would be
master on the right. So the position matches the port name.
</p>
<p class="note">
The default value of <code>&lt;MasterPosition value="0"/&gt;</code> has