Correct busses spelling

include/controlling-track-ordering.html

@@ -81,7 +81,7 @@
 </p>
 
 <p>
-  Remote IDs are assigned to tracks and buses in the order that they appear in
+  Remote IDs are assigned to tracks and busses in the order that they appear in
   the mixer window from left to right, starting from #1; manual assignment of
   remote IDs is not possible. The master bus and monitor section can be
   accessed by name.

include/osc58-controlling-ardour-with-osc.html

@@ -110,13 +110,13 @@ here</em>"/&gt;</kbd>
   deal with this is to think of strip_types items being worth a number and
   then adding all those numbers together for a value to send.
   Strip Types will determine what kind of strips will be included in
-  bank. This would include: Audio, MIDI, buses, VCAs, Master, Monitor
+  bank. This would include: Audio, MIDI, busses, VCAs, Master, Monitor
   and hidden or selected strips.
 </p>
 <p>
   Aside from setting the track types for the main mix assignments, using
   /set_surface/strip_types with more than one surface button will allow
-  switching between modes for example: inputs only, buses only,
+  switching between modes for example: inputs only, busses only,
   selected only, hidden only, by having the buttons send values of: 3,
   12, 256, 512. A full mix button might have a value 31.
 </p>

include/osc58-feedback-and-strip-types-values.html

@@ -28,10 +28,10 @@
 		2	- MidiTracks.
 	</li>
 	<li>
-		4	- AudioBuses.
+		4	- AudioBusses.
 	</li>
 	<li>
-		8	- MidiBuses.
+		8	- MidiBusses.
 	</li>
 	<li>
 		16	- VCAs.
@@ -60,7 +60,7 @@
   to show inline with other strips.
 </p>
 <p>
-  Some handy numbers to use might be: 15 (all tracks and buses), 31
+  Some handy numbers to use might be: 15 (all tracks and busses), 31
   (add VCAs to that). Master or Monitor strips are generally not useful
   on a surface that has dedicated controls for these strips as there are
   /master* and /monitor* commands already. However, on a surface with
@@ -72,17 +72,17 @@
 <p class-"note">
   Audio Aux? say what? I am sure most people will have noticed that they
   can find no <em>Aux</em> strips in the Ardour mixer. There are none.
-  There are buses that can be used a number of ways. From analog days,
+  There are busses that can be used a number of ways. From analog days,
   in OSC, a bus is something that gets used as a sub mix before ending up
   going to Master. An auxiliary bus is used like a separate mixer and
   it's output goes outside the program or computer to be used as:
   a monitor mix, a back up recording, or what have you. In OSC where
   controller strips may be limited, it may be useful not to use up a
   strip for an aux that is not really a part of the mix. It is also
-  useful to get a list of only aux buses if the control surface is a
+  useful to get a list of only aux busses if the control surface is a
   phone used to provide talent monitor mix control on stage. Each
   performer would be able to mix their own monitor. The user is free
-  to enable both buses and auxes if they would prefer.
+  to enable both busses and auxes if they would prefer.
 </p>
 
 <h3>feedback</h3>

include/osc58-personal-monitoring-control.html

@@ -18,7 +18,7 @@
 		<li>
 			Connect the output of that bus to one of the audio
 			interface's playback ports that is not otherwise used. OSC
-			will now include this bus in it's list of aux buses as it
+			will now include this bus in it's list of aux busses as it
 			no longer has it's output connected to the Master bus.
 		</li>
 		<li>
@@ -55,7 +55,7 @@
 <h4>Commands</h4>
 <dl class="bindings">
   <dt><kbd class="osc">/cue/connect</kbd></dt>
-  <dd>Returns a list of aux buses.</dd>
+  <dd>Returns a list of aux busses.</dd>
   <dt><kbd class="osc">/cue/aux <em>aux-number</em></kbd></dt>
   <dd>where <em>aux-number</em> is an integer which is the aux bus
   number this surface will use.</dd>
@@ -64,7 +64,7 @@
   <dt><kbd class="osc">/cue/previous_aux</kbd></dt>
   <dd>Sets the aux to one bus lower.</dd>
   <dt><kbd class="osc">/cue/connect</kbd></dt>
-  <dd>Returns a list of aux buses.</dd>
+  <dd>Returns a list of aux busses.</dd>
   <dt><kbd class="osc">/cue/fader <em>position</em></kbd></dt>
   <dd>where <em>position</em> is a float for the position of the fader
   between 0.0 and 1.0.</dd>

include/osc58-using-the-setup-dialog.html

@@ -103,7 +103,7 @@
   and hidden strips. If it is desired to only see input tracks the
   others can be deselected. It is also possible to change these settings
   from the control surface. A set of buttons could select showing only
-  inputs or only buses. If a group is selected in the GUI then showing
+  inputs or only busses. If a group is selected in the GUI then showing
   only selected strips will show only that group. Showing hidden tracks
   is handy for cases where a groups of tracks that grouped to a bus or
   controlled by a VCA are hidden, but one of those tracks needs a tweak.

include/understanding-basic-concepts-and-terminology.html

@@ -93,7 +93,7 @@
   kick, snare and overhead tracks, it may be helpful to connect the output of
   each to a bus called "drums", so that the drum kit's level can be set as a
   unit, and processing (such as equalization or compression) can be applied to
-  the mix of all the tracks. Such buses are also called <dfn>groups</dfn>.
+  the mix of all the tracks. Such busses are also called <dfn>groups</dfn>.
 </p>
 
 <h2>Regions</h2>