manual/_manual/22_using-control-surfaces/06_Ableton_Push2.html

367 lines
13 KiB
HTML
Raw Normal View History

---
layout: default
title: Using the Ableton Push 2
menu_title: Ableton Push 2
---
<p>
2016-09-27 16:11:56 -04:00
<img alt="the Ableton Push 2 surface" src="/images/push2-main.jpg">
</p>
<p>
2016-09-26 23:25:55 -04:00
Since version 5.4, Ardour has had full support for the Ableton
Push2. This is an expensive but beautifully engineered control
surface primarily targetting the workflow found in Ableton's Live
software and other similar tools such as Bitwig. As of 5.4, Ardour
does not offer the same kind of workflow, so we have repurposed the
Push 2 to be used for mixing and editing and musical performance,
2016-09-26 23:25:55 -04:00
without the clip/scene oriented approach in Live. This may change in
future versions of Ardour.
</p>
<h2>Connecting the Push 2</h2>
<p>
Plug the USB cable from the Push 2 into a USB2 or USB3 port on your
computer. For brighter backlighting, also plug in the power supply
(this is not necessary for use).
</p>
2016-09-27 16:44:15 -04:00
<p>ft
The Push 2 will be automatically recognized by your operating
system, and will appear in any of the lists of possible MIDI ports
in both Ardour and other similar software.
</p>
<p>
To connect the Push 2 to Ardour, open the Preferences dialog, and
then click on "Control Surfaces". Click on the "Enable" button
in the line that says "Ableton Push 2" in order to activate Ardour's
Push 2 support.
</p>
<p>
Once you select the input and output port, Ardour will initialize
the Push 2 and it will be ready to use. You only need do this
once: once these ports are connected and your session has been
saved, the connections will be made automatically in this and other
future sessions.
</p>
2016-09-27 16:15:24 -04:00
<h2>Push 2 Configuration</h2>
<p>
The only configuration option at this time is whether the pads send
aftertouch or polyphonic pressure messages. You can alter this
setting via the Push 2 GUI, accessed by double-clicking on the "Push
2" entry in the control surfaces list.
<p>
<img alt="the Push 2 configuration dialog"
src="/images/push2-gui.png">
</p>
2016-09-26 23:25:55 -04:00
<h2>Basic Concepts</h2>
<p>
2016-09-26 23:25:55 -04:00
With the Push 2 support in Ardour 5.4, you can do the following
things:
<dl>
2016-09-26 23:25:55 -04:00
<dt>Perform using the 8 x 8 pad "grid"</dt>
<dd>The Push 2 has really lovely pressure-sensitive pads that can
also generate either aftertouch or note (polyphonic) pressure.</dd>
<dt>Global Mixing</dt>
<dd>See many tracks at once, and control numerous parameters for each.</dd>
<dt>Track/Bus Mixing</dt>
<dd>View a single track/bus, with even more parameters for the track.</dd>
<dt>Choose the mode/scale, root note and more for the pads</dt>
<dd>37 scales are available. Like Live, Ardour offers both
"in-key" and "chromatic" pad layouts.</dd>
</dl>
2016-09-27 15:56:10 -04:00
... plus a variety of tasks related to transport control, selection,
import, click track control and more.
</p>
2016-09-26 23:25:55 -04:00
<h2>Musical Performance</h2>
<p>
2016-09-26 23:25:55 -04:00
Messages sent from the 8x8 pad grid and the "pitch bend bar" are
2016-09-27 15:56:10 -04:00
routed to a special MIDI port within Ardour called "Push 2 Pads"
2016-09-26 23:25:55 -04:00
(no extra latency is incurred from this routing). Although you can
manually connect this port to whatever you wish, the normal
behaviour of Ardour's Push 2 support is to connect the pads to the
most recently selected MIDI track.
</p>
<p>
2016-09-26 23:25:55 -04:00
This means that to play a soft-synth/instrument plugin in a given
MIDI track with the Push 2, you just need to select that track.
</p>
<p>
2016-09-26 23:25:55 -04:00
If multiple MIDI tracks are selected at once, the first selected
track will be used. Note that messages originating from all other
controls on the Push 2 will <em>not</em> not be delivered to the
2016-09-27 15:56:10 -04:00
"Push 2 Pads" port. This makes no difference in practice, because
2016-09-26 23:25:55 -04:00
the other controls do not send messages that are useful for musical
performance.
</p>
2016-09-26 23:25:55 -04:00
<h2>Global Mix</h2>
<p>
2016-09-26 23:25:55 -04:00
This is the default mode that Ardour will start the Push 2 in. In
this mode, the 8 knobs at the top of the device, the 8 buttons below
them, the video display and the 8 buttons below that are combined to
provide a global view of the session mix.
2016-09-27 15:45:07 -04:00
</p>
<p>
<img alt="global mix mode on Push2 screen"
src="/images/push2-globalmix.png">
</p>
2016-09-26 23:25:55 -04:00
<p>
The upper buttons are labelled by text in the video display just
below them. Pressing one of the buttons changes the function of the
knobs, and the parameters that will shown for each track/bus in the
2016-09-27 16:44:15 -04:00
display.
</p>
<p>
As of Ardour 5.4, the possible parameters are:
2016-09-26 23:25:55 -04:00
<dl>
<dt>Volumes</dt>
<dd>The display shows a knob and text displaying
the current gain setting for the track, and a meter that
corresponds precisely to the meter shown in the Ardour GUI for
that track. Changing the meter type (e.g. from Peak to K12) in the
GUI will also change it in the Push 2 display. The physical knob
will alter track/bus gain.
</dd>
<dt>Pans</dt>
<dd>The display shows a knob indicating the pan direction/azimuth
for the corresponding track/bus. Turning the physical knob will
pan the track left and right. If the track/bus has no panner
(i.e. it has only a single output), no knob is shown and the
physical knob will do nothing. </dd>
<dt>Pan Widths</dt>
<dd><p>For tracks with 2 outputs, the display will show a knob
indicating the pan width setting for the corresponding
track/bus. The physical knob can be turned to adjust the
width.
</p>
<p>
Unlike many DAWs, Ardour's stereo panners have "width"
parameter that defaults to 100%. You cannot change the pan
direction/azimuth of a track with 100% width, but must first
reduce the width in order to pan it. Similarly, a track panned
anywhere other than dead center has limits on the maximum
width setting. If these concepts are not familiar to you,
please be aware than many DAWs use a "panner" that actually
implement "balance" and not "panning", hence the difference.
</p>
</dd>
<dt>A Sends</dt>
<dd>The display shows a knob indicating the gain level for the
first send in that track. If the track has no send, no knob will
be shown, and the physical knob for that track will do nothing.
</dd>
2016-09-26 23:27:27 -04:00
<dt>B Sends, C Sends, D Sends</dt>
<dd>Like "A Sends", but for the 2nd, 3rd and 4th sends of a
2016-09-26 23:25:55 -04:00
track/bus respectively.
2016-09-26 23:27:27 -04:00
</dd>
2016-09-26 23:25:55 -04:00
</dl>
</p>
<p>
To change which tracks are shown while in global mix mode, use the
left and right arrow/cursor keys just below and to the right of the
display. Tracks and busses that are hidden in Ardour's GUI will also
be hidden from display on the Push 2.
</p>
<p>
To select a track/bus directly from the Push 2, press the
corresponding button below the display. The track name will be
highlighted, and the selection will change in Ardour's GUI as well
(and also any other control surfaces).
</p>
<h3>Soloing and Muting in Global Mix mode</h3>
<p>
The Solo and Mute buttons to the left of the video display can be
used to solo and mute tracks while in Global Mix mode. The operation
will be applied to the <em>first</em> currently selected
track(s).
</p>
<p>
There are two indications that one or more tracks are soloed:
<ol>
<li>The solo button will blink red</li>
<li>Track names will be prefixed by "*" if they are soloed, and
"-" if they are muted due to soloing.</li>
</ol>
</p>
<p>
To cancel solo, either:
<ul>
<li>Select the soloed track(s) and press the solo button
again</li>
<li>Press and hold the solo button for more than 1 second</li>
</ul>
</p>
2016-09-26 23:25:55 -04:00
<h2>Track Mix</h2>
<p>Track Mix mode allows you to focus on a single track in more detail
than is possible in Global Mix mode. To enter (or leave) Track Mix
mode, press the "Mix" button.
</p>
2016-09-27 15:45:07 -04:00
<p>
2016-09-27 15:53:13 -04:00
2016-09-27 15:45:07 -04:00
</p>
<p>
In Track Mix mode, various aspects of the state of the first
selected track/bus will be displayed on the Push 2. Above the
display, the first 4 knobs control track volume (gain), pan
directiom/azimuth, pan width, and where appropriate, track input
trim.
</p>
<p>
Below the display, 7 buttons provide immediate control of mute,
solo, rec-enable, monitoring (input or disk or automatic), solo
isolate and solo safe state. When a a track is muted due to other
track(s) soloing, the mute button will flash (to differentiate from
its state when it is explicitly muted).
</p>
<p>
The video display also shows meters for the track, which as in
Global Mix mode, precisely match the meter type shown in Ardour's
GUI. There are also two time displays showing the current playhead
position in both musical (beats|bars|ticks) format, and as
hours:minutes:seconds.
</p>
<p>
To change which track is visible in Track Mix mode, use the
left/right arrow/cursor keys just below and to the right of the
video display.
</p>
2016-09-26 23:25:55 -04:00
2016-09-27 15:53:13 -04:00
<h2>Scale Selection</h2>
<p>
Press the Scale button to enter Scale mode. The display will look
like this:
</p>
<p>
<img alt="track mix mode on Push2 screen"
src="/images/push2-scale.png">
</p>
<p>
In the center, 37 scales are presented. Scroll through them by
either using the cursor/arrow keys to the lower right of the
display, or the knobs above the display. The scale will change
dynamically as you scroll. You can also scroll in whole pages using
the upper right and upper left buttons above the display (they will
display "<" and ">" if scrolling is possible).
</p>
<p>
To change the root note of the scale, press the corresponding button
above or below the video display.The button will be lit to indicate
your selection (and the text will be highlighted).
</p>
<p>
By default, Ardour configures the Push 2 pads to use "in-key" mode,
where all pads correspond to notes "in" the chosen scale. Notes
corresponding to the root note, or the equivalent note in higher
octaves, are highlighted with the color of the current target MIDI
track.
</p>
<p>
In
"chromatic" mode, the pads correspond to a continuous sequence of
notes starting with your selected root note. Pads corresponding to
notes in the scale are illuminated; those corresponding to the root
note are lit with the color the current target MIDI track. Other
pads are left dark, but you can still play them.
</p>
<p>
To switch between them, press button on the lower left of the video
display; the text above it will display the current mode (though it
is usually visually self-evident from the pad lighting pattern).
</p>
2016-09-27 15:57:47 -04:00
<p>
To leave Scale mode, press the "Scale" button again. You may also
use the upper left button above the display, though if you have
scrolled left, it may require more than one press.
</p>
2016-09-27 15:53:13 -04:00
2016-09-26 23:25:55 -04:00
<h2>Specific Button/Knob Functions</h2>
<p>
In addition to the layouts described above, many (but not all) of
the buttons and knobs around the edges of the Push 2 will carry out
various functions related to their (illuminated) label. As of Ardour
5.4, this includes:
<dl>
<dt>Metronome (button and adjacent knob)</dt>
<dd>
Enables/disables the click (metronome). The knob directly above
it will control the volume (gain) of the click.
</dd>
<dt>Undo/Redo</dt>
<dd>
Undo or redo the previous editing operation.
</dd>
<dt>Delete</dt>
<dd>
Deletes the currently selected region, or range, or
note. Equivalent to using Ctrl/Cmd-x on the keyboard.
</dd>
<dt>Quantize</dt>
<dd>
If a MIDI region is selected in Ardour, this will open the
quantize dialog.
</dd>
<dt>Duplicate</dt>
<dd>
Duplicates the current region or range selection.
</dd>
<dt>Rec-Enable</dt>
<dd>
Enables and disables Ardour's global record enable state.
</dd>
<dt>Play</dt>
<dd>
Starts and stops the transport.
</dd>
<dt>Add Track</dt>
<dd>
Opens Ardour's Add Track/Bus dialog.
</dd>
<dt>Browse</dt>
<dd>
Open's Ardour's import dialog to select and audition existing
audio and MIDI files.
</dd>
<dt>Master</dt>
<dd>
Pressing this button jumps directly to Track Mix mode, with the
master out bus displayed.
</dd>
<dt>Cursor arrows</dt>
<dd>
These are used by some modes to navigate within the display (e.g
Scale mode). In other modes, the up/down cursor arrows will
scroll the GUI display up and down, while the left/right cursor
arrows will generally scroll within the Push 2 display itself.
</dd>
<dt>Repeat</dt>
<dd>
Enables/disables loop playback. This will follow Ardour's "loop
is mode" preference, just like the loop button in the Ardour
GUI.
</dd>
<dt>Octave buttons</dt>
<dd>
These shift the root note of the current pad scale up or down by
1 octave.
</dd>
<dt>Page buttons</dt>
<dd>
These scroll Ardour's editor display left and right along the
timeline.
</dd>
<dt>Master (top right) knob</dt>
<dd>
This knob controls the gain/volume of Ardour's main output. If
the session has a monitor saec
</dd>
</dl>
2016-09-26 23:25:55 -04:00
</p>