manual/include/latency-considerations.html

<p>  
  In the days of analog tape recording, the routing of monitor signals was
  performed with relays and other analog audio switching devices.  Digital 
  recorders have the same feature, but may impart some 
  <a
  href="/synchronization/latency-and-latency-compensation/"><dfn>latency</dfn></a> 
  (delay) between the time you make a noise and the time that you hear it 
  come back from the recorder.
</p>
<p>
  The latency of <em>any</em> conversion from analog to digital and back to 
  analog is about 1.5&ndash;2&nbsp;ms. Some musicians claim that even the 
  basic <abbr title="Analog to Digital to Analog">A/D/A</abbr> conversion 
  time is objectionable. However even acoustic instruments such as the piano 
  can have approximately 3&nbsp;ms of latency, due to the time the sound
  takes to travel from the instrument to the musician's ears. Latency below 
  5&nbsp;ms should be suitable for a professional recording setup. Because
  2&nbsp;ms are already used in the A/D/A process, you must use extremely low 
  <dfn>buffer sizes</dfn> in your workstation <abbr title="Input/Output">I/O</abbr> 
  setup to keep the overall latency below 5ms. Not all 
  <a href="/setting-up-your-system/the-right-computer-system-for-digital-audio/">computer audio systems</a> 
  are able to work reliably at such low buffer sizes.
</p>
<p>
  For this reason it is sometimes best to route the monitor signal
  through an external mixing console while recording, an approach taken by
  most if not all professional recording studios. Many computer I/O devices 
  have a hardware mixer built in which can route the monitor signal "around"
  the computer, avoiding the systemlatency.<br>
  In either case, the monitoring hardware may be digital or analog.  And in 
  the digital case you will still have the A-D-A conversion latency of
  1&ndash;2&nbsp;ms.
</p>