manual/include/timecode-generators-and-slaves.html

290 lines
11 KiB
HTML
Raw Normal View History

2013-02-15 13:21:59 -05:00
<p>
2014-02-18 17:13:02 -05:00
Ardour supports three common timecode formats:
<abbr title="Linear/Longitudinal Time Code"><dfn>LTC</dfn></abbr>,
<abbr title="MIDI Time Code"><dfn>MTC</dfn></abbr>, and
<dfn>MIDI Clock</dfn>, as well as
2014-02-18 17:13:02 -05:00
<dfn>JACK-transport</dfn>, a JACK-specific timecode implementation.
2013-02-15 13:21:59 -05:00
</p>
<p>
Ardour can generate timecode and thus act as timecode <dfn>master</dfn>,
providing timecode information to other applications. Ardour can also be
<dfn>slaved</dfn> to some external source in which case the playhead
follows the incoming timecode.<br>
Combining the timecode slave and generator modes, Ardour can also
2014-02-18 17:13:02 -05:00
<dfn>translate</dfn> timecode. e.g create LTC timecode from incoming MTC.
2013-02-15 13:21:59 -05:00
</p>
<h2>Ardour Timecode Configuration</h2>
<p>
Each Ardour session has a specific timecode frames-per-second setting which
2014-02-18 17:13:02 -05:00
is configured in <kbd class="menu">session &gt; properties &gt;
timecode</kbd>. The selected timecode affects the timecoderuler in the main
2014-02-18 17:13:02 -05:00
window as well as the clock itself.
2013-02-15 13:21:59 -05:00
</p>
2013-02-15 18:49:44 -05:00
<p>
Note that some timecode formats do not support all of Ardour's available
2014-02-18 17:13:02 -05:00
fps settings. MTC is limited to 24, 25, 29.97 and 30 fps.
2013-02-15 18:49:44 -05:00
</p>
<p>
2014-02-18 17:13:02 -05:00
The video pull-up modes change the effective samplerate of Ardour to allow
for changing a film soundtrack from one frame rate to another. The concept is
beyond the scope of this manual, but Wikipedia's entry on
<a href="http://en.wikipedia.org/wiki/Telecine">Telecine</a>
2014-02-18 17:13:02 -05:00
may get you started.
2013-02-15 18:49:44 -05:00
</p>
2013-02-15 13:21:59 -05:00
<h2>Ardour Timecode Generator Configuration</h2>
<p>
This is pretty straightforward: simply turn it on. The MTC and MIDI-Clock
2014-02-18 17:13:02 -05:00
generator do not have any options. The LTC generator has a configurable
output level. JACK-transport cannot be <em>generated</em>. Jack itself is
always synced to its own cycle and cannot do varispeed&mdash;it will
2014-02-18 17:13:02 -05:00
always be synced to a hardware clock or another JACK master.
2013-02-15 13:21:59 -05:00
</p>
<p>
The relevant settings for timecode generator can be found in
2014-02-18 17:13:02 -05:00
<kbd class="menu">Edit &gt; Preferences &gt; MIDI Preferences</kbd> (for MTC,
MC) and
<kbd class="menu">Edit &gt; Preferences &gt; Transport Preferences</kbd>
(for LTC).
2013-02-15 13:21:59 -05:00
</p>
<p>
The timecode is sent to jack-ports <code>ardour:MTC out</code>,
<code>ardour:MIDI clock out</code> and <code>ardour:LTC-out</code>. Multiple
2014-02-18 17:13:02 -05:00
generators can be active simultaneously.
2013-02-15 13:21:59 -05:00
</p>
2014-02-18 17:13:02 -05:00
<p class="note">
Note that, as of Jan 2014, only the LTC generator supports latency
compensation. This is due to the fact the Ardour MIDI ports are not
2014-02-18 17:13:02 -05:00
yet latency compensated.
2013-02-15 13:21:59 -05:00
</p>
<p>
In <kbd class="menu">Session &gt; Properties</kbd>, it is possible to
define an offset between Ardour's internal time and the timecode sent.
2014-02-18 17:13:02 -05:00
Currently only the LTC generator honors this offset.
2013-02-15 13:21:59 -05:00
</p>
2013-02-15 18:49:44 -05:00
<p>
Both LTC and MTC are limited to 30&nbsp;fps. Using frame rates larger
than that will disable the generator. In both cases also only 24, 25,
29.97df (drop-frame) and 30&nbsp;fps are well defined by specifications (such as
2014-02-18 17:13:02 -05:00
SMPTE-12M, EU and the MIDI standard).
2014-02-02 17:16:21 -05:00
</p>
2013-02-15 13:21:59 -05:00
2013-02-15 17:20:27 -05:00
<h3>MTC Generator</h3>
2013-02-15 13:21:59 -05:00
<p>
The <dfn>MTC generator</dfn> has no options. Ardour sends full MTC
frames whenever the transport is relocated or changes state (start/stop).
MTC <dfn>quarter frames</dfn> are sent when the transport is rolling and
2014-02-18 17:13:02 -05:00
the transport speed is within 93% and 107%.
2013-02-15 13:21:59 -05:00
</p>
2013-02-15 17:20:27 -05:00
<h3>LTC Generator</h3>
2013-02-15 13:21:59 -05:00
<p>
The level of the <dfn>LTC generator</dfn> output signal can be configured
in in the <kbd class="menu">Preferences &gt; Transport</kbd> dialog. By
default it is set to -18&nbsp;dBFS, which corresponds to 0dBu in an EBU
2014-02-18 17:13:02 -05:00
calibrated system.
2013-02-15 13:21:59 -05:00
</p>
<p>
The LTC generator has an additional option to keep sending timecode even
when the transport is stopped. This mode is intended to drive analog tape
2014-02-18 17:13:02 -05:00
machines which unspool the tape if no LTC timecode is received.
2013-02-15 13:21:59 -05:00
</p>
2013-02-15 18:49:44 -05:00
<p>
LTC is send regardless of Ardour's transport speed. It is accurately
generated even for very slow speeds (&lt;5%) and only limited by the
soundcard's sampling-rate and filter (see
2014-02-18 17:13:02 -05:00
<a
href="http://en.wikipedia.org/wiki/Gibbs_phenomenon#Signal_processing_explanation">Gibbs phenomenon</a>)
2014-02-18 17:13:02 -05:00
for high speeds.
</p>
2013-02-15 18:49:44 -05:00
2013-02-15 13:21:59 -05:00
<h2>Ardour Slave Configuration</h2>
<p>
The timecode source can be switched with the button just right of
2014-02-18 17:13:02 -05:00
Ardour's main clock. By default it is set to <kbd
class="menu">Internal</kbd> in which case Ardour will ignore any external
timecode. The button allows to toggle between Internal and the configured
timecode source which is chosen in <kbd class="menu">Edit &gt; Preferences
2014-02-18 17:13:02 -05:00
&gt; Transport</kbd>.
2013-02-15 13:21:59 -05:00
</p>
<p>
When Ardour is <dfn>chasing</dfn> (synchronizing to) an external timecode
2014-02-18 17:13:02 -05:00
source, the following cases need to be distinguished:
2013-02-15 13:21:59 -05:00
</p>
<ol>
<li>the timecode source shares the clock</li>
<li>the timecode source is independent (no wordclock sync)</li>
2013-02-15 13:21:59 -05:00
</ol>
<p>and</p>
2013-02-15 13:21:59 -05:00
<ol>
<li>the timecode source uses the same FPS setting as Ardour</li>
<li>the timecode source runs at different frames-per-second</li>
2013-02-15 13:21:59 -05:00
</ol>
<p>
2014-02-18 17:13:02 -05:00
In both cases the first option is preferred: clock sync + same FPS setting.
2013-02-15 13:21:59 -05:00
</p>
<h3>Frames-per-second</h3>
<p>
If the frames-per-second do not match, Ardour can either re-calculate
2014-02-18 17:13:02 -05:00
and map the frames, or the configured FPS (<kbd class="menu">Session &gt;
Properties</kbd>) can be changed automatically while the slave is active.
The behavior is configured with the checkbox <kbd class="option">Edit
&gt; Preferences &gt; Transport &gt; Match session video frame rate to
2014-02-18 17:13:02 -05:00
external timecode</kbd>.
</p>
<p>
When enabled, the session video frame rate will be changed to match that
of the selected external timecode source. When disabled, the session video
frame rate will not be changed to match that of the selected external
timecode source. Instead the frame rate indication in the main clock will
flash red, and Ardour will convert between the external timecode standard
2014-02-18 17:13:02 -05:00
and the session standard.
</p>
<p class="warning">
29.97 drop-frame timecode is another corner case. While the SMPTE 12M-1999
specifies 29.97df as 30000/1001 frames per second, not all hardware devices
follow that standard. The checkbox
<kbd class="option">Lock to 29.9700 fps instead of 30000/1001</kbd> allows
to use a compatibility mode for those devices.<br>
When enabled, the external timecode source is assumed to use 29.970000 fps
instead of 30000/1001. SMPTE 12M-1999 specifies 29.97df as 30000/1001. The
<abbr title="specification">spec</abbr> further mentions that drop-frame
timecode has an accumulated error of -86&nbsp;ms over a 24-hour period.
Drop-frame timecode would compensate exactly for a NTSC color frame rate
of 30 * 0.9990 (ie 29.970000). That is <em>not</em> the actual rate. However,
some vendors use that rate&mdash;despite it being against the
specs&mdash;because the variant of using exactly 29.97 fps yields zero
timecode drift.
2013-02-15 13:21:59 -05:00
</p>
2013-02-15 15:49:33 -05:00
<h3>Clock Sync Lock</h3>
2013-02-15 13:21:59 -05:00
<p>
As described in the
2014-02-18 17:13:02 -05:00
<a href="http://manual.ardour.org/synchronization/on-clock-and-time/">On Clock and Time</a>
chapter, timecode and clock are independent. If the external timecode
source is not in sample-sync with the audio hardware (and JACK), Ardour
2014-02-18 17:13:02 -05:00
needs to run at varispeed to adjust for the discrepancy.
2013-02-15 13:21:59 -05:00
</p>
<p>
The checkbox <kbd class="option">External timecode is sync locked</kbd>
allows to select the behavior according to your setup. When enabled, it
indicates that the selected external timecode source shares sync (Black
2014-02-18 17:13:02 -05:00
&amp; Burst, Wordclock, etc) with the audio interface.
2013-02-15 13:21:59 -05:00
</p>
<p>
In other words: if enabled, Ardour will only perform initial
synchronization and keep playing at speed 1.0 instead of vari-speed
2014-02-18 17:13:02 -05:00
adjusting to compensate for drift.
2013-02-15 13:21:59 -05:00
</p>
2014-02-18 17:13:02 -05:00
<p class="note">
Note that vari-speed is unavailable when recording in Ardour, and all
tracking happens at speed 1.0. So if you want to record in sync with
2014-02-18 17:13:02 -05:00
external timecode it must be sample-locked or it will drift over time.
2013-02-15 13:21:59 -05:00
</p>
2014-02-18 17:13:02 -05:00
<h3>MIDI Clock</h3>
2013-02-15 13:21:59 -05:00
<p>
<dfn>MIDI Clock</dfn> is not a timecode format but tempo-based time. The
absolute reference point is expressed as beats-per-minute and Bar, Beat
and Tick. There is no concept of sample-locking for MIDI clock signals.
2014-02-18 17:13:02 -05:00
Ardour will vari-speed if necessary to chase the incoming signal.
2013-02-15 13:21:59 -05:00
</p>
<p>
Note that the MIDI Clock source must be connected to the
2014-02-18 17:13:02 -05:00
<code>ardour:MIDI clock in</code> port.
2013-02-15 13:21:59 -05:00
</p>
<h3>LTC&mdash;Linear Timecode</h3>
2013-02-15 13:21:59 -05:00
<p>
The <dfn>LTC</dfn> slave decodes an incoming LTC signal on a JACK audio
2014-02-18 17:13:02 -05:00
port. It will auto-detect the frame rate and start locking to the signal
once two consecutive LTC frames have been received.
2013-02-15 13:21:59 -05:00
</p>
<p>
The incoming timecode signal needs to arrive at the
<code>ardour:LTC-in</code> port. Port-connections are restored for each
session and the preference dialog offers an option to select it for all
2014-02-18 17:13:02 -05:00
sessions.
2013-02-15 13:21:59 -05:00
</p>
<p>
Ardour's transport is aligned to LTC-frame start/end positions according
to the SMPTE 12M-1999 specification, which means that the first bit of an
LTC-Frame is aligned to different Lines of a Video-Frame, depending on the
TV standard used. Only for Film (24fps) does the LTC-Frame directly match
2014-02-18 17:13:02 -05:00
the video Frame boundaries.
2013-02-15 13:21:59 -05:00
</p>
2017-02-13 14:38:01 -05:00
<img src="/images/ltc-transport-alignment.png" title="LTC frame alignment" alt="LTC frame alignment"/>
2013-02-15 15:49:33 -05:00
<p><em>Figure: LTC frame alignment for the 525/60 TV standard</em></p>
2013-02-15 13:21:59 -05:00
<p>
Ardour supports vari-speed and backwards playback but will only follow
speed changes if the <kbd class="optoff">sync locked</kbd> option is
2014-02-18 17:13:02 -05:00
disabled.
2013-02-15 13:21:59 -05:00
</p>
<p>
While Ardour is chasing LTC, the main transport clock will display the
received Timecode as well as the delta between the incoming signal and
2014-02-18 17:13:02 -05:00
Ardour's transport position.
2013-02-15 13:21:59 -05:00
</p>
<p>
A global offset between incoming timecode and Ardour's transport can be
2014-02-18 17:13:02 -05:00
configured in <kbd class="menu">Session &gt; Properties</kbd>.
2013-02-15 13:21:59 -05:00
</p>
<p>
2014-02-18 17:13:02 -05:00
The user-bits in the received LTC frame are ignored.
2013-02-15 13:21:59 -05:00
</p>
<h3>MTC&mdash;MIDI Timecode</h3>
2013-02-15 13:21:59 -05:00
<p>
Ardour's MTC slave parses <dfn>full timecode messages</dfn> as well as
MTC <dfn>quarter-frame messages</dfn> arriving on the
<code>ardour:MTC in</code> port. The transport will only start rolling
2014-02-18 17:13:02 -05:00
once a complete sequence of 8 quarter frames has been received.
2013-02-15 13:21:59 -05:00
</p>
<p>
Ardour supports vari-speed and backwards playback but will only follow
MTC speed changes if the <kbd class="optoff">sync locked</kbd> option
2014-02-18 17:13:02 -05:00
is disabled.
2013-02-15 13:21:59 -05:00
</p>
<p>
When Ardour is chasing MTC, the main transport clock will display the
received Timecode as well as the delta between the incoming signal and
2014-02-18 17:13:02 -05:00
Ardour's transport position.
2013-02-15 13:21:59 -05:00
</p>
2013-02-15 17:20:27 -05:00
<h3>JACK Transport</h3>
2013-02-15 13:21:59 -05:00
<p>
When slaved to jack, Ardour's transport will be identical to
JACK-transport. As opposed to other slaves, Ardour can be used to control
the JACK transport states (stopped/rolling). No port connections need to
2014-02-18 17:13:02 -05:00
be made for jack-transport to work.
2013-02-15 13:21:59 -05:00
</p>
<p>
JACK-transport does not support vari-speed, nor offsets. Ardour does not
2014-02-18 17:13:02 -05:00
chase the timecode but is always in perfect sample-sync with it.
2013-02-15 13:21:59 -05:00
</p>
<p>
JACK-transport also includes temp-based-time information in Bar:Beats:Ticks
and beats-per-minute. However, only one JACK application can provide this
information at a given time. The checkbox
2014-02-18 17:13:02 -05:00
<kbd class="option">Session &gt; Properties &gt; JACK Time Master</kbd>
configures Ardour to act as translator from timecode to BBT information.
2013-02-15 13:21:59 -05:00
</p>