13
0
livetrax/manual/xml/mixer_strips.xml
Tim Mayberry b8a6f94325 Add a help target(the default target) and format target to the manual
Makefile

Reformat the docs, I explained in a prior commit why this modifies 
every file


git-svn-id: svn://localhost/ardour2/trunk@1463 d708f5d6-7413-0410-9779-e7cbd77b26cf
2007-02-15 03:49:43 +00:00

520 lines
23 KiB
XML

<?xml version="1.0" standalone="no"?>
<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
]>
<!-- XXX lots to do on this page -->
<section id="mixer-strips">
<title>Mixer Strips</title>
<para>
Each track and bus is represented in the mixer window by a
<emphasis>mixer strip</emphasis> that contains various controls related
to signal flow. There are two places in Ardour in which you can see
mixer strips. The mixer window is the obvious one (and the one we deal
with here), but you can also view a single mixer strip in the editor
window by clicking the <guibutton>editor mixer</guibutton> button.
</para>
<mediaobject>
<imageobject>
<imagedata fileref="images/mixerstrip.png"/>
</imageobject>
</mediaobject>
<para>
this image needs replacing with labels and better resolution The mixer
strip for a bus is essentially identical to the one for an audio track,
but it is missing certain controls that make no sense - you cannot
record into a bus, so there is no record enable button, for example.
</para>
<para>
The mixer strips are designed to visually model signal flow. The input
button selects the input of the track that this mixer strip monitors.
The outputs of the track (the 'tape recorder') are 'hard-wired' to the
inputs of the mixer strip. Think of the input to the strip starting at
the polarity switch, flowing down through the prefader
inserts/plugins/sends section, through the gain fader, past the
postfader inserts/plugins/sends section, the panner, and out through the
output selector. In the case of a bus, there is no 'tape machine'
inserted between the input selector and the actual input of the strip,
but the signal flow is identical otherwise.
</para>
<section id="mixer-strip-narrow-strip-button">
<title>Narrow Mixer Strip Button</title>
<para>
the button on the top left of the mixer strip is labelled with two
arrows separated by a line. Left clicking this button will reduce the
horizontal size of the mixer strip. Clicking it again will restore the
previous size. The first click also has the effect of shortening the
names of controls. Plugin lists become very small in this mode,
however more faders are accessible without scrolling. Your needs may
vary, hence the existence of this button.
</para>
</section>
<section id="mixer-strip-hide-button">
<title>Hide Button</title>
<para>
The button opposite the <emphasis>Narrow Mixer Strip Button</emphasis>
hides the mixer strip from view. this button has no effect on signal
flow or muting. When a mixer strip is hidden, it's entry in the strips
list is darkened. To restore the mixer strip to the visible state,
click it's entry in the strip list with the left mouse button.
</para>
</section>
<section id="mixer-strip-track-name">
<title>Track Name</title>
<para>
The track name displays the current name of the track as displayed in
the editor window. right-clicking on the name brings up a drop-down
menu that allows you to rename, activate, deactivate and remove the
track. Selecting <guimenuitem>Rename</guimenuitem> opens a new window
displaying the name of the track. to change it, type your change and
press ok. to leave it unaltered, press cancel. Selecting
<guimenuitem>remove</guimenuitem> opens a new window asking for
confirmation of your track removal request. removing a track removes
that track from the project. If the playlist used by the removed track
is not used by any other track, it will also be removed.
</para>
</section>
<section id="mixer-strip-group-button">
<title>Group Button</title>
<para>
The group button displays the name of the currently selected mix
group. if no group is selected, it will read no group. when clicked, a
drop-down menu appears which lists the current mixer groups, along
with the option no group. if a group is selected, any fader movement
on one of the group member faders will be translated to the other
members of the group.
</para>
</section>
<section id="mixer-strip-input-selector">
<title>Input Selector</title>
<para>
The input selector allows you to assign hardware or software inputs to
the track that this mixer strip monitors. clicking on the input box
makes a drop-down menu appear which lists ready-made combinations of
jack ports, along with the options disconnect and edit. You can either
select a preset hardware input combination from the drop-down list, or
select <guimenuitem>edit</guimenuitem> to open the input selector
window which allows finer control, such as changing the number of
inputs to the track or using software devices as inputs. For more
information on this window, see <xref linkend="sn-other-windows"/>.
<guibutton>Disconnect</guibutton> removes all input assignments while
leaving the number of ports untouched.
</para>
</section>
<section id="mixer-strip-polarity-button">
<title>Polarity Button</title>
<para>
The polarity button, when pressed, inverts the phase of the signal as
it leaves the track and enters the mixer strip. it has no effect on
the signal being recorded to disk. It has no effect on the timing of
the signal, either.
</para>
</section>
<section id="mixer-strip-solo-button">
<title>Solo Button</title>
<para>
The solo button puts the mixer strip in solo mode. the solo indicator
in the editor window will flash if any mixer strip is set to solo, and
only those tracks that are set in solo will be routed through the
system.
</para>
</section>
<section id="mixer-strip-mute-button">
<title>Mute Button</title>
<para>
The mute button mutes the output of the mixer strip.
</para>
</section>
<section id="mixer-strip-track-speed-control">
<title>Track Speed Control</title>
<para>
The track speed allows a varispeed setting to be applied to the track.
a setting of <literal>1.0</literal> corresponds to the normal playback
speed of the session. a setting of <literal>0.5</literal> will play at
half normal playback speed. when altered, the track will be redrawn to
reflect the new position of the audio resulting from the speed change.
The Track Speed Control has three decimal places of precision. A left
or right click on the displayed number will raise or lower the track
speed by 0.1%. when the speed is not exactly 1, the display will be
coloured red. Hovering over the displayed number will allow you to use
the mouse wheel to set the desired speed. A middle click on the
displayed number will return the speed to exactly 1.
</para>
<para></para>
</section>
<section id="mixer-strip-record-enable-button">
<title>Record Enable Button</title>
<para>
The record enable button arms the track for recording. pressing this
will change the way you monitor and meter the selected input signal
depending on the state of the monitoring settings in the options
editor, as well as the auto input setting in the editor.
</para>
</section>
<section id="mixer-strip-automation-mode-buttons">
<title>Automation Mode Buttons</title>
<para>
The automation mode buttons allow you to select a fader or pan
automation mode from a drop-down list. see
<xref linkend="sn-automation"/> for more information about automation
modes.
</para>
</section>
<section id="mixer-strip-redirect-boxes">
<title>Redirect Boxes</title>
<para>
These dark areas above and below the fader allow you to place inserts,
sends and plugins into the signal path before and after the fader
respectively. you may also easily reorder them whilst playing.
collectively, the objects that belong in these boxes are called
redirects. If there are redirects present in the channel, they can be
reordered by dragging them vertically. because plugins and inserts can
have different numbers of inputs to outputs, sometimes you may reach a
situation where the inputs and outputs cannot be all connected
sensibly. in this case, your reordering change will be disallowed by
the program.
</para>
<para>
Right clicking within the dark area will bring up a drop-down menu
which allows you to manipulate the redirects in various ways.
</para>
<variablelist>
<title>Redirect Boxes</title>
<varlistentry>
<term><guimenuitem>new plugin</guimenuitem></term>
<listitem>
<para>
selecting new plugin will open a dialog which lists the plugins
available on your system. selecting a plugin which is compatible
with the number of streams in the channel at that point will
result in the plugin being placed in the redirect box in an
inactive state. this is indicated by the brackets around the
plugin name. double-clicking the plugin name will bring up a
window that allows you to control the parameters of the plugin
statically (including bypass) or using automation. all plugins
that report their latency are time-compensated automatically in
ardour.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guimenuitem>new insert</guimenuitem></term>
<listitem>
<para>
places at least two new jack ports at that point in the mixer
strip (one input, one output). these ports will then be
available to any jack client (including Ardour itself), allowing
another program (or channels within another program) to be
inserted across the channel. hardware ports may also, of course,
be used, allowing the insertion of outboard equipment. the
insert will then appear in the redirect box in brackets
indicating that it is inactive. to activate or deactivate an
insert, right-click on it and select activate. double-clicking
on the insert will bring up a dialog which allows to to assign
its inputs and outputs to other jack ports.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guimenuitem>new send</guimenuitem></term>
<listitem>
<para>
selecting new send will first bring up a dialog box that enables
you to select the number of outputs the send has, along with the
destination of each output. closing this dialog will reveal the
name of the send in brackets, indicating that it is inactive. to
activate the send, right click on it and select Activate.
double-clicking on the send brings up the previous dialog, which
will now include a fader which is provided for level control.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guimenuitem>clear</guimenuitem></term>
<listitem>
<para>
selecting clear in the menu removes all redirects from the mixer
strip (pre and post fader). you can remove an individual
redirect by holding the shift key and right clicking it.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guimenuitem>cut</guimenuitem>, <guimenuitem>copy</guimenuitem>, <guimenuitem>paste</guimenuitem></term>
<listitem>
<para>
these items allow you to cut, copy and paste plugins, including
their current settings, between Redirect Boxes.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guimenuitem>rename</guimenuitem></term>
<listitem>
<para>
selecting rename will bring up a dialog displaying the name of
the selected redirect. change the name by typing into the text
area and pressing ok.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guimenuitem>select all/deselect all</guimenuitem></term>
<listitem>
<para>
these two options select or deselect all plugins in the channel.
this could be used, for instance, in preparation to copy all
plugins from a channel to another one, along with the current
settings.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guimenuitem>activate/deactivate</guimenuitem></term>
<listitem>
<para>
selecting either of these will activate or deactivate the
currently selected redirect(s) respectively. deactivate is the
equivalent of <guimenuitem>bypass</guimenuitem>.
</para>
<note>
<para>
note that you can bypass a plugin from it's parameter window
as well as from here.
</para>
</note>
</listitem>
</varlistentry>
<varlistentry>
<term><guimenuitem>activate all/deactivate all</guimenuitem></term>
<listitem>
<para>
selecting either of these will activate or deactivate all
redirect(s) in the mixer strip respectively. deactivate is the
equivalent of <guimenuitem>bypass</guimenuitem> if you're a
plugin.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guimenuitem>edit</guimenuitem></term>
<listitem>
<para>
selecting edit brings up the controls relevent to the selected
redirect. this is the equivalent to holding control and
right-clicking on a redirect. note that the right click method
will not bring up the controls of the selected redirect, only
the one beneath the mouse pointer.
</para>
</listitem>
</varlistentry>
</variablelist>
</section>
<section id="mixer-strip-pre-post-input-button">
<title>Pre/Post/Input Button</title>
<para>
This button cycles between three metering modes, which determine which
signal is fed to the meters. the modes are pre-fader (the signal at
the input to the fader), post-fader and input (the level at the track
input). left clicking cycles through the three modes one step at a
time, while middle-clicking alternates between the current setting and
the setting two steps ahead. this allows one-click direct a/b
comparison between all available monitoring points.
</para>
</section>
<section id="mixer-strip-gain-display">
<title>Gain Display</title>
<para>
this control displays the current gain of the fader to the nearest
0.1dB. left clicking on the value will lower the gain by an amount
dependent upon the fader position the graduations become smaller as
the fader nears 0dB gain. right clicking increases the gain by the
same amount. middle clicking resets the gain to 0dB.
</para>
</section>
<section id="mixer-strip-unit-selector">
<title>Unit Selector</title>
<para>
Right clicking on the meter bars allows you to select the range of
signal levels displayed by the meters. the selected range will be
displayed as a column of numbers next to the meter. /*XXX this feature
is currently not working*/ Gain Level Display
</para>
</section>
<section id="mixer-strip-peak-meter">
<title>Peak Meter</title>
<para>
This control displays the highest peak since the last peak meter
reset. Resetting the peak meter is achieved by left-clicking the
displayed number. The peak meter monitors the signal selected by the
<emphasis>Pre/Post/Input Button</emphasis> .. the same signal as the
meters. It should be noted here that 0dBfs corresponds a value equal
to the maximum input or output level of your audio hardware,
independent of it's bit depth.
</para>
</section>
<section id="mixer-strip-gain-fader">
<title>Gain Fader</title>
<para>
The fader changes the signal level within the mixer strip before the
post-fader plugins, which are before the output ports. 6dB of gain is
allowed. there are several shortcuts available for the fader. Using
the scroll wheel of your mouse while hovering above the fader will
coarsely change its position. Holding the control key whilst mouse
wheeling will give you finer control. Holding the shift key and
clicking the fader will reset it to unity gain. Holding control and
pressing the middle mouse button whilst over the fader will allow you
to bind a midi control to it, provided you have an available midi
device set in the options menu.
</para>
</section>
<section id="mixer-strip-meters">
<title>Meters</title>
<para>
The number of meters displayed next to the fader is dependent on the
number of inputs or outputs the channel has, whichever is greater. The
meters provide a colour-graduated scale from -50 dBfs to +6dBfs. They
display the instantaneous value of the signal at the monitoring point
selected by the Pre/Post/Input button. 0dBfs corresponds a value equal
to the maximum input or output level of your audio hardware,
independent of it's bit depth. Exceeding 0dBfs does not correspond to
running out of headroom within the mixer, or in any signal path
subsequent to that point within the Jack server. It merely means that
if that signal is connected directly to a hardware port whose
resolution is less than the 32-bit floating point resolution that
Ardour uses (i.e. a soundcard), then that port will exceed it's
maximum output level, resulting in distortion. hitting 0dB within the
mixer (or any point in the Jack server) means that you have
approximately 100dB of headroom remaining. as it is unlikely that you
will reach this point, it is not represented in any special way by the
meter. Naturally, if the input is selected as the monitoring point for
the meter, exceeding 0dBfs means that the input of your a/d converter
has clipped.
</para>
</section>
<section id="mixer-strip-panner">
<title>Panner</title>
<para>
The panner in Ardour is actually two panners. Because any mixer strip
in Ardour can route any number of streams of audio anywhere, the idea
of panning can be a complex one. To allow for the current
stereo-centric mainstream world as well as the multi-speaker
experimental one, one of two styles of panner will appear here
depending on the number of outputs the channel strip has. In the
simple case of mono channel input / stereo output, a single panner
will be present. The current pan position is represented by a dot (the
dot is the audio stream) which lies between the letters 'L' and 'R',
which represent the left and right outputs respectively. To change the
panning position of the stream, move the mouse while holding down the
left mouse button. the dot will follow your mouse pointer. To
introduce sudden changes to the pan setting, place the mouse pointer
over the desired position and click the middle mouse button. The pan
control will immediately snap to the mouse pointer position. The
panner may be bypassed by right-clicking the control and selecting
<guimenuitem>bypass</guimenuitem> from the drop-down menu. The panner
will immediately be bypassed. The increased level you notice when the
panner is bypassed is due to the way panning works. It is not a bug.
<emphasis>XXX what gain law is used in the panner?</emphasis>
</para>
<para>
In the case of a stereo input / stereo output combination, two panning
controls will appear, one corresponding to each audio stream. You can
<emphasis>link</emphasis> the controls together in two different ways
in this situation, using the direction arrows next to the
<guibutton>link</guibutton> button. Panners can be linked to travel
either in opposite directions or to maintain a consistent stereo width
across the travel of the control. These two modes are represented by
the orientation of the two arrows next to the
<guibutton>link</guibutton> button, which point in either the same or
opposite directions. The <guibutton>link</guibutton> button must be
engaged before you can change the <emphasis>link</emphasis> mode. To
link all the panners in a mixer strip, left-click the
<guibutton>link</guibutton> button, then select the desired link mode
by pressing the button marked with arrows.
</para>
<para>
Let's get a little more complicated by adding another output to the
mixer strip. From this point onwards, the panning positions are
represented with numbered dots on a square field. Orange dots
represent the outputs, and the numbered dots represent the streams.
the position of the outputs change according to the number of outputs
in the strip. This happens in order to allow the most useful
arrangement of the available space. At some point, adding an output
will cause the outputs to line up from the top left of the panning
square towards the centre. this is to allow for the 'multi-speaker big
sweep' to occur - where the sound is panned from speaker to speaker
around the room in sequence.
</para>
<para>
Don't forget that you can bypass the panner by right clicking and
selecting <guimenuitem>bypass</guimenuitem> from the drop-down menu.
this may simplify your multi-speaker setup, as often in this type of
project panning between all speakers or outputs is not required on all
tracks.
</para>
</section>
<section id="mixer-strip-output-selector">
<title>Output Selector</title>
<para>
The output selector allows you to assign the outputs of each mixer
strip. left-clicking the output selector causes a ready-made list of
output ports to appear in a drop-down menu, along with edit and
disconnect options. Selecting <guimenuitem>Edit</guimenuitem> will
allow you to change the number of outputs the channel has, as well as
select software and hardware ports to route signals to. For more
information on the window that appears when you select this option,
see the <xref linkend="sn-other-windows"/>.
<guimenuitem>Disconnect</guimenuitem> will leave the number of output
ports unchanged, but remove all assignments to output ports.
</para>
</section>
<section id="mixer-strip-scratch-pad">
<title>Scratch Pad</title>
<para>
This is the text area below the <guibutton>output</guibutton> button.
it allows you to enter any notes that you feel may be relevant to that
track. The notes are stored when you save the session.
</para>
</section>
</section>