d3081fd816
mackie: reverse previous profile editor changes; allow profile to define anything except plain and shift actions.
...
For Fn keys we also allow plain and shift definitions
2016-02-04 11:24:26 -05:00
aefa63aaa6
mackie: radically shrink down the profile editor
...
We only expose user control over Fn keys and only the shift modifier
2016-02-04 11:24:26 -05:00
23b1944bea
Mackie protocol: set-session-from-edit-range moved to shift+marker
2016-02-04 09:30:37 -06:00
aac6a59071
Mackie Protocol: Move buttons to more accurately reflect default mcp legends.
...
Modifiers are only modifiers (no actions directly on modifiers).
Punch indicators moved to Drop/Replace.
Added Save, Undo, Cancel (select none) and Enter (select all tracks)
Fixed click button.
Up&Down buttons now move the selected track up & down.
2016-02-03 18:11:21 -06:00
10a11492dd
mackie: fix gain control display
2016-02-03 17:27:14 -05:00
eeff08aac4
mackie: use bus shortname in send subview.
...
Also slightly tighten route name display
2016-02-03 17:27:01 -05:00
7f82e7769f
zero more stuff out when leaving subview mode
2016-02-03 17:25:28 -05:00
dc4daa892d
Mackie Protocol: Show dB values for Mixbus "Send" levels.
...
No sense rewriting it now, but the correct way to approach
this stuff is to pass in the control, and use
the appropriate one of: interface, internal, or user values.
in this case, get_user would have returned dB for both Ardour and Mixbus sends.
2016-02-03 13:48:56 -06:00
b4a9bf5878
Mackie Control: Save old bank before we change it to new.
2016-02-02 18:41:49 -08:00
fea89a7f9b
fix compiler warning
2016-02-02 18:30:51 -05:00
8df1baa659
Fix for previous commit
2016-02-02 16:14:00 -06:00
ea08354c17
fix for knob scaling
2016-02-02 15:47:05 -06:00
99a53ed7f0
Mackie Control: Fix Flip mode getting confused if subview is not sends.
2016-02-02 09:38:55 -08:00
7229dccb3b
Mackie Control: Shift/Select now toggles individual channels within group. Makes this the same as other grouped controls.
2016-02-02 09:03:27 -08:00
a7775559c1
Mackie Control: remove Shift/select zeros fader.
2016-02-02 08:55:36 -08:00
abb151b8b0
Mackie Control: Moved encoder fine modifier from Control to Shift (Shift will be only modifier)
2016-02-02 08:49:16 -08:00
9b1a150dd9
mackie: update fader+pot when changing flip status
2016-02-02 11:17:38 -05:00
a85b8ed842
mackie: fix display of input trim level trackview mode
2016-02-02 08:15:35 -05:00
4c13018656
mackie: fix display of send level/fader level in send subview
2016-02-02 08:08:14 -05:00
36b11098a2
mackie: substantial reworking of flip mode with large chunks of code no longer used.
...
Flip mode only works in Sends subview mode.
Display is incorrect when flipped - vpot is still updated by send level changes. TO BE FIXED.
2016-02-01 22:52:22 -05:00
cf29447ec3
mackie: add Phase control (for first channel only) in Track View subview mode.
...
Also removed a couple of methods no longer used, since trim and phase are only
visible in TrackView mode.
2016-02-01 15:15:57 -05:00
5153631d70
change API of MIDI::Port::drain() to include a maximum blocking time
2016-02-01 13:26:30 -05:00
d98021624f
mackie: stop playing games with start/end range LEDs
2016-02-01 12:22:23 -05:00
ca813315bf
mackie: add new bindings for Save,Undo,Cancel,Enter
...
these now control punch in, punch out, external sync and follow edits, respectively
2016-02-01 12:22:01 -05:00
5eccbbfbd6
mackie: fix stupid thinko, and use BaseUI::access_action() to correctly accesss GUI actions
2016-02-01 12:20:55 -05:00
c69514afe9
Mackie protocol: clear Marker modifer
2016-01-31 22:28:13 -06:00
55967972b6
mackie: slightly less fragile/more readable code for compute new controllable values from vpot events
...
This is still not really right - it doesn't do the right thing, i think, for trim controls
2016-01-31 22:43:21 -05:00
c66d7e8cf9
mackie: consistent use of Shift to mean "InverseGroup"
2016-01-31 22:42:29 -05:00
de29ed02bc
mackie: display correct numerical send level
2016-01-31 22:41:46 -05:00
20d74585fd
mackie: implement trim, monitoring, solo iso and solo safe for trackview submode
2016-01-31 21:54:01 -05:00
9cfd76c026
mackie: make shift-click use InverseGroup semantics as intended, not NoGroup
2016-01-31 21:53:29 -05:00
23f457e81e
NOOP: comment fix
2016-01-31 21:52:46 -05:00
27b565d5cc
mackie: make vselect events and pot events handle toggle/enumeration controls correctly (or more correctly
2016-01-31 21:52:14 -05:00
69b4228176
mackie: partially working trackview submode.
...
More controls/pots to come
2016-01-31 13:20:18 -05:00
da665a5dc5
mackie: fix bug that prevents global view mode from working without first banking
2016-01-31 13:20:18 -05:00
f44acc4857
mackie: fix some awful cut-n-paste errors
2016-01-31 13:20:18 -05:00
3631cc1532
mackie: remove Trim pot mode, and add skeleton for TrackView subview mode
2016-01-31 13:20:18 -05:00
d3dfd74497
mackie: strengthen behaviour of clear solo button
2016-01-31 11:36:46 -05:00
2491549923
mackie: make replace (finish-range) LED flash at the right time
2016-01-31 11:36:31 -05:00
6780b7eb54
mackie: make nudge work as modifier and on its own
2016-01-31 11:17:23 -05:00
b78be4d705
mackie: hard-code drop+replace buttons to start/finish-range-from-playhead
...
With some LED action that would even better with blinking
2016-01-31 11:02:21 -05:00
af1028bd90
mackie: make marker button work as Mackie intends it (as a modifier for rewind/ffwd)
2016-01-31 11:01:41 -05:00
2b56dc17e3
mackie: add "clean" method to invoke GUI actions from button events, in code
2016-01-31 11:00:16 -05:00
ef793d3762
mackie: shift-stop additionally requests MIDI Panic, as well as regular stop
2016-01-31 09:11:43 -05:00
e622f3e5b6
Mackie protocol: Fix stuck-on Read LED.
2016-01-30 21:38:18 -06:00
9115a2c5d2
Surfaces with separate meters should meter even when stopped.
2016-01-30 09:46:37 -06:00
f762cbff35
mackie: remove mention of "blinkers" concept
2016-01-29 18:40:56 -05:00
d5a8825ce8
mackie: basically (fully?) operation fader automatio control for first selected route
2016-01-29 18:37:03 -05:00
da35f58218
mackie: initial attempt at making automation-related buttons set fader automation state for selected routes
2016-01-29 16:29:52 -05:00
9fe4b7a92a
mackie: if a subview mode is not OK because there's no selection, show no message
2016-01-29 16:15:41 -05:00
4a6724868d
NOOP: change brace placement to avoid confusing emacs
2016-01-29 16:15:41 -05:00
42fbb96674
mackie: make group button (appear) to do something
2016-01-29 16:15:41 -05:00
9088944db2
Mackie protocol: More LED indicator fixes.
2016-01-29 14:26:08 -06:00
39a61dba83
mixbus: vpot press in non-subview mode should toggle master bus send
2016-01-29 12:58:50 -05:00
c6ea3515d1
mackie: in Sends subview mode, the enable control for the send should be looked upin the subview route, not the strip's own route
2016-01-29 12:41:50 -05:00
4b70a0aa0d
Button::AudioInstruments should not be lit without good reason.
2016-01-29 11:28:15 -06:00
0a2377e9b4
mackie: redesign display logic entirely
...
Strips now maintain a pair of pending display strings (upper and lower).
A periodic timeout writes the pending value to the actual hardware if it
differs from the current string. This new design makes it easy to put a
message on the display and then after some period of time, revert to
whatever was there before.
2016-01-29 12:27:46 -05:00
8aaa027ed3
mackie: fix Global View button function
...
Bug introduced changing logic for set_view_mode()
2016-01-28 23:20:03 -05:00
d0668e5511
mackie: don't overload "Audio Instruments" and "Instruments" buttons.
...
With the MCU Pro, the button labelled "Instruments" uses the Dyn button ID.
The one labelled "Audio Instruments" does not.
This may break Nucleus support - needs to be checked
2016-01-28 23:05:28 -05:00
e862be7300
mackie: use Route::send_name() rather than Route::nth_send()
2016-01-28 23:05:28 -05:00
f1ed01b97f
mackie: fix display of send level value
2016-01-28 23:05:28 -05:00
cf558ee18c
Buses and Auxes are slightly different view-filters in Mixbus
2016-01-28 17:21:42 -06:00
54c3c9e494
prevent bank/channel switching past the end of the available routes; do nothing when a view mode finds no matching routes
2016-01-28 16:27:33 -05:00
ea895efb97
mackie: improvements to display when switching subview modes
2016-01-28 15:08:26 -05:00
d19b1b64b1
make Send button light appropriately
2016-01-28 15:08:25 -05:00
420206705d
mackie: fix subview mode logic
2016-01-27 19:05:47 -05:00
e63c805fe2
mackie: clean up (some) interactions between subview mode and selection
...
Also, stop Plugin button from doing anything, since it has nothing to do yet
2016-01-27 19:00:27 -05:00
c61e5dbc18
remove debug output
2016-01-27 16:26:50 -05:00
66686a4e2a
mackie: semi-working Sends subview mode
2016-01-27 14:15:41 -05:00
9b2af90328
remove mackie send pot mode (subview mode for sends coming up)
2016-01-27 12:41:01 -05:00
9e5b7db89f
first compiling, mostly working version of group controls changes
2016-01-22 11:58:31 -05:00
fe7aac8dac
mackie: remove unnecessary connection to route group property change signal
2016-01-19 14:25:48 -05:00
fe3d85b204
Revert "mackie: still respond to route groups visibility changes"
...
This reverts commit a9ec547457
2016-01-19 14:16:49 -05:00
a9ec547457
mackie: still respond to route groups visibility changes
2016-01-19 13:38:29 -05:00
22c5cb47f7
mackie: remove changes to group activation status when fetching routes to display
...
This creates an activation loop, because we fetch new routes to display when
group active status is changed. This was done to provide individual access to
routes that are in a group. We plan to do this using a shift modifier instead.
2016-01-19 12:46:08 -05:00
5a55ac582d
mackie: shift-fader overrides group settings
2016-01-18 12:11:09 -05:00
c2bf0fc94e
remove shift-fader-touch as a way to reset gain to default
2016-01-18 12:11:09 -05:00
746d5c6624
add API to allow mackie controls to use GroupControlDisposition
2016-01-18 12:11:09 -05:00
19af86ece2
Mackie Control: Fix crash in multi-surface setup when add/remove tracks.
2016-01-18 08:58:07 -08:00
ef7c6730cb
Groups: Fix un/set hidden/show should reset RID for tracks involved.
2016-01-17 14:17:02 -08:00
23041fda88
Mackie Control: fix math error that tried to change bank to very high number
2016-01-16 11:17:52 -08:00
92dba5bfa3
Mackie Control: Added hidden tracks view mode.
2016-01-16 07:32:30 -08:00
9dfdaff1a4
Mackie Control: Need signal from session if group parameters change so strips redisplay if group un/hides.
2016-01-15 16:19:15 -08:00
b3fd65d149
Mackie Control: Don't show hidden groups either.
2016-01-15 13:58:08 -08:00
6b356448e3
Mackie Control: Don't show hidden routes.
2016-01-15 13:16:24 -08:00
0b58cde467
Mackie Control: Remove unused global_solo_* functions, moved functionality to clearsolo_* functions.
...
Changed to clear only rather than toggle and added Listen Clear as well.
2016-01-14 13:06:14 -08:00
b81504581b
another DEBUG_TRACE for mackie control x-thread requests
2016-01-12 23:30:14 -05:00
7cbf35a3d6
Mackie Control, Fix sends after monitor not showing.
2016-01-12 08:15:57 -08:00
9e3299f97d
change Controllable::set_value() API to include grouped control consideration.
...
This also removes Route::group_gain_control() and associated machinery.
Not yet tested with Mackie or other surfaces. More work to done to
start using the group capabilities, and also potentially to add
or derive more controls as RouteAutomationControls
2016-01-02 04:58:30 -05:00
0d9efc1148
redesign cross-thread registration/signalling system
...
This new design will work even when threads that need to receive
messages from RT threads are created *after* the RT threads. The
existing design would fail because the RT thread(s) would never
be known the later created threads, and so signals emitted by the
RT thread and causing call_slot() in the receiver would end up
being enqueued using a lock-protected list. The new design ensures
that communication always uses a lock-free FIFO instead
2015-12-28 10:14:17 -05:00
85e12e8095
Mackie control: non-existent controls zero pot ring fix.
2015-12-19 11:50:13 -08:00
07e4377d7b
NoOp: removed spaces, replaced with tabs.
2015-12-16 20:41:50 -08:00
82f31fe624
Mackie Control: Re-enable view_mode display and make sure all text vanishes after timeout.
2015-12-16 14:38:21 -08:00
8bb4ac0ac7
Fix MCP time display sometimes doesn't update to zero time on return to zero (shift-rew)
2015-12-16 12:24:10 -08:00
bff1fcbe48
mackie: restore access to trim and pan width control
...
Change from Evoral::Parameter to AutomationType caused this glitch
2015-12-16 11:05:40 -05:00
3b872fb207
fix some merge issues from cherry-picking mackie changes from a mixbus repo
2015-12-16 06:31:06 -05:00
93d5fe83c8
mackie: properly track lifetime of subview route; fix subview/potmode LED state mgmt
2015-12-16 06:01:55 -05:00
a9a4cfb166
mackie: track compressor mode changes in display
2015-12-16 06:01:47 -05:00
1152bf87a2
make vselect-press in subview mode act as a toggle for toggled controls
2015-12-16 06:01:38 -05:00
a6da818bc4
add dynamics support to mackie control
2015-12-16 06:01:29 -05:00
