66a3dd7ded
MCU: Remove use of AutomationType as ID, part two.
...
This may need some small tweaks for MB channelstrip to set
print-format (like LV2 plugins would) for cases where the default
value_as_string() differs.
2017-06-23 17:39:20 +02:00
5e5f7a55ee
MCU: Remove use of AutomationType as ID, part one.
2017-06-23 17:39:20 +02:00
d3738b087e
MCP: Fix issue with strip "select" buttons that stayed stuck on.
...
* Depending on individual strips to watch the selection property is prone to failure.
* Stripable_selection_changed() is called when a selection operation is completed.
2017-05-17 15:55:43 -05:00
3eaa6c0389
remove certain ControlProtocol signals related to stripable selection
...
includes change to Mackie support so that strips listen for PropertyChange
on the stripables they represent, no global selection change used anymore.
2016-06-10 13:57:18 -04:00
0d9433aef6
remove no-effect handling of route active-status change in Mackie Control code
2016-05-31 15:30:43 -04:00
c34ad3a723
convert Mackie Control Surface support to use Stripable, not Route
2016-05-31 15:30:42 -04:00
36b11098a2
mackie: substantial reworking of flip mode with large chunks of code no longer used.
...
Flip mode only works in Sends subview mode.
Display is incorrect when flipped - vpot is still updated by send level changes. TO BE FIXED.
2016-02-01 22:52:22 -05:00
cf29447ec3
mackie: add Phase control (for first channel only) in Track View subview mode.
...
Also removed a couple of methods no longer used, since trim and phase are only
visible in TrackView mode.
2016-02-01 15:15:57 -05:00
69b4228176
mackie: partially working trackview submode.
...
More controls/pots to come
2016-01-31 13:20:18 -05:00
3631cc1532
mackie: remove Trim pot mode, and add skeleton for TrackView subview mode
2016-01-31 13:20:18 -05:00
0a2377e9b4
mackie: redesign display logic entirely
...
Strips now maintain a pair of pending display strings (upper and lower).
A periodic timeout writes the pending value to the actual hardware if it
differs from the current string. This new design makes it easy to put a
message on the display and then after some period of time, revert to
whatever was there before.
2016-01-29 12:27:46 -05:00
66686a4e2a
mackie: semi-working Sends subview mode
2016-01-27 14:15:41 -05:00
a9a4cfb166
mackie: track compressor mode changes in display
2015-12-16 06:01:47 -05:00
a6da818bc4
add dynamics support to mackie control
2015-12-16 06:01:29 -05:00
e3d0de3bf6
mackie: use new route API for universal access to pan/eq/dynamics parameters to provide panning and EQ control
2015-12-16 06:01:20 -05:00
81179389d3
mackie: cleanup subview mode a little
2015-12-16 05:55:10 -05:00
8ba8f1c0b0
fix cherry-pick conflict
2015-12-16 05:54:43 -05:00
616e925322
tentative mcu panning for mixbus. hey, it compiles
2015-12-16 05:46:52 -05:00
ace771bc91
Mackie Control: Add send functionality to vpot assign section.
2015-11-06 16:18:13 -08:00
8ae23c6952
Fix Mackie surface phase control for flip and more than one audio channel.
2015-11-01 15:30:36 -08:00
2e9de2def0
Added Phase control mackie controls as part of the Trim (track) vpot assignment.
2015-11-01 13:35:02 -08:00
0185c9f25a
Added Midi Tracks View mode.
2015-10-18 18:13:16 -07:00
f7e3117c3b
Only display Trim for tracks that have Trim. On the way:
...
-fixed flip mode.
-fixed no controlable for vpot or fader
2015-10-18 07:38:40 -07:00
53a28c230a
mackie support omnibus patch
...
Fixes all kinds of miscellaneous issues with MCP. Also removes several theoretical pan modes, replace "Tracks"
pan mode with "Trim", and takes a tiny step towards view modes
2015-10-13 15:34:53 -04:00
965b135842
numerous changes to Mackie support, generally offering better robustness
2015-10-10 17:14:30 -04:00
d700576171
remove unused and useless stuff relating to bundles inside Mackie::Strip
...
What was someone (Paul? John ?) thinking?
2015-10-09 11:10:44 -04:00
d3efef7f5c
fix logic to reshow strip "name" after a message display
2015-10-08 14:58:28 -04:00
0cb1c7b58c
lots of changes to try to get the Mackie Control display be more useful and usable
2015-10-08 12:51:44 -04:00
4677d047a5
more mackie strip redisplay renames, and add a global block to redisplays\n
2015-10-08 12:51:18 -04:00
0f978a90f4
subtle rework/rename of per-strip revert-to-vpot-display code
2015-10-08 12:50:05 -04:00
6899bd7c15
Add Trim to Mackie controls.
2015-10-07 21:36:16 -07:00
22b07e0233
NOOP, remove trailing tabs/whitespace.
2015-10-05 16:17:49 +02:00
4dc63966f0
globally remove all trailing whitespace from ardour code base.
...
Paul Davis was responsible for introducing almost all of this.
2015-10-04 14:51:05 -04:00
ef6b0bdb07
necessary header changes for new redisplay code in MCP
2015-10-02 22:08:14 -04:00
4512d013eb
put all of the Mackie control surface code into the ArdourSurface namespace
2015-04-15 20:37:20 -04:00
29b3c299a1
add a hack to deal with device discovery race, in which the devices were not actually known to be ready before the last update_surfaces() call (which is where binding between strips and routes occurs) ; add support for Mackie Control touch on/off messages
2014-02-19 13:22:52 -05:00
Julien de Kozak
27d77b8719
Fix some compilation warnings
2013-03-30 18:09:40 +01:00
ba5e71b50f
MCP: Patch from Rodrigo that:
...
* implements Metering on/off through Button::Read as per Seablade's suggestion. I choose this button as it's the "Show meters" button in Traktion;
* removes redundant code from Meter::update_transport_rolling();
* renames Meter::update_transport_rolling() to Meter::notify_metering_state_changed();
* renamed Surface::notify_transport_state_changed() to Surface::notify_metering_state_changed();
* renamed Strip::notify_transport_state_changed() to Strip::notify_metering_state_changed();
* created MackieControlProtocol::notify_metering_state_changed() and made MackieControlProtocol::notify_transport_state_changed() use it;
* implemented turning off of timecode display and two char display in Surface::zero_all ();
* implemented master fader zeroing in Surface::zero_all ();
* calling Surfaces->zero_all() at MackieControlProtocol destructor;
* implemented restore of 2nd LCD line content after metering being active.
git-svn-id: svn://localhost/ardour2/branches/3.0@12520 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-06-01 12:56:20 +00:00
28e3bc3ac7
MCP: metering changes from rodrigo, makes metering work correctly on the MC Pro (also checked on the nucleus)
...
git-svn-id: svn://localhost/ardour2/branches/3.0@12489 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-05-30 14:32:27 +00:00
edad92a944
control surfaces: make it possible to keep display of current GUI/selection state as we bank through tracks/bussses. note careful use of weak_ptr<Route> to avoid messing with Route lifetimes. this scheme may change
...
git-svn-id: svn://localhost/ardour2/branches/3.0@12115 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-28 01:43:38 +00:00
3b7e2f7d67
MCP: properly (?) handle bank/channel scrolling with locked strips
...
git-svn-id: svn://localhost/ardour2/branches/3.0@12095 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-26 14:28:41 +00:00
ec97b8e58d
MCP: lots of good stuff - recenable bug fixed, cursor keys for vertical scroll work, loop button lights/unlightspan pots don't adjust if there is no panner, etc.
...
git-svn-id: svn://localhost/ardour2/branches/3.0@12093 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-26 03:46:18 +00:00
ac1b2a6647
MCP: another bevy of changes, including working jog wheel
...
git-svn-id: svn://localhost/ardour2/branches/3.0@12056 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-22 17:37:52 +00:00
82c867bf2a
MCP: a fistful of improvements. probably best to just try it and see what it broken. KNOWN: pressing vpots without a bank/channel shift will crash ardour
...
git-svn-id: svn://localhost/ardour2/branches/3.0@12053 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-22 02:15:24 +00:00
e06620280b
MCP: maybe fix vpot display behavior for pan width
...
git-svn-id: svn://localhost/ardour2/branches/3.0@12009 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-18 16:52:38 +00:00
72d17d326e
MCP: a fistful of changes
...
git-svn-id: svn://localhost/ardour2/branches/3.0@11987 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-16 19:05:27 +00:00
2ed2b61224
MCP: redesign to allow device-specific button IDs, since we know that at least one device (nucleus) does not honor mackie's specification document
...
git-svn-id: svn://localhost/ardour2/branches/3.0@11972 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-14 19:02:54 +00:00
ae09d046c1
MCP: better display of parameter values, off by one error when collecting controls for buttons, more GUI
...
git-svn-id: svn://localhost/ardour2/branches/3.0@11964 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-13 20:27:08 +00:00
8f7fa7d93b
MCP: timeout display of value when altering with fader or pot; range ops on strip buttons should work; select logic may be broken
...
git-svn-id: svn://localhost/ardour2/branches/3.0@11959 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-13 16:11:55 +00:00
f511b7cc6b
show gain level as its adjusted from ardour GUI (not reverted back); basic support for select/solo/mute/recenabel range ops, but not functioning yet
...
git-svn-id: svn://localhost/ardour2/branches/3.0@11958 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-13 03:46:38 +00:00
