e2f6c59639
add required request buffer factory for Wiimote
2015-12-28 11:13:04 -05:00
0d9efc1148
redesign cross-thread registration/signalling system
...
This new design will work even when threads that need to receive
messages from RT threads are created *after* the RT threads. The
existing design would fail because the RT thread(s) would never
be known the later created threads, and so signals emitted by the
RT thread and causing call_slot() in the receiver would end up
being enqueued using a lock-protected list. The new design ensures
that communication always uses a lock-free FIFO instead
2015-12-28 10:14:17 -05:00
85e12e8095
Mackie control: non-existent controls zero pot ring fix.
2015-12-19 11:50:13 -08:00
07e4377d7b
NoOp: removed spaces, replaced with tabs.
2015-12-16 20:41:50 -08:00
82f31fe624
Mackie Control: Re-enable view_mode display and make sure all text vanishes after timeout.
2015-12-16 14:38:21 -08:00
8bb4ac0ac7
Fix MCP time display sometimes doesn't update to zero time on return to zero (shift-rew)
2015-12-16 12:24:10 -08:00
2f86d1b7dd
properly namespace hacked OSC callbacks, add some notes.
2015-12-16 18:17:38 +01:00
13d704b25d
redundant OSC commands to support TouchOSC and Lemur (vestigial float args)
2015-12-16 10:29:49 -06:00
bff1fcbe48
mackie: restore access to trim and pan width control
...
Change from Evoral::Parameter to AutomationType caused this glitch
2015-12-16 11:05:40 -05:00
3b872fb207
fix some merge issues from cherry-picking mackie changes from a mixbus repo
2015-12-16 06:31:06 -05:00
93d5fe83c8
mackie: properly track lifetime of subview route; fix subview/potmode LED state mgmt
2015-12-16 06:01:55 -05:00
a9a4cfb166
mackie: track compressor mode changes in display
2015-12-16 06:01:47 -05:00
1152bf87a2
make vselect-press in subview mode act as a toggle for toggled controls
2015-12-16 06:01:38 -05:00
a6da818bc4
add dynamics support to mackie control
2015-12-16 06:01:29 -05:00
e3d0de3bf6
mackie: use new route API for universal access to pan/eq/dynamics parameters to provide panning and EQ control
2015-12-16 06:01:20 -05:00
81179389d3
mackie: cleanup subview mode a little
2015-12-16 05:55:10 -05:00
8ba8f1c0b0
fix cherry-pick conflict
2015-12-16 05:54:43 -05:00
e302ce8662
only use 1/100th gap between markers if transport is stopped, to prevent repeated user action from adding multiple markers when stopped (mackie version)
2015-12-16 05:52:47 -05:00
a1ef99b9b7
add beginnings of EQ and dynamics control to mackie for mixbus
2015-12-16 05:52:36 -05:00
99764e946a
add UserA and UserB buttons to mackie button list
2015-12-16 05:52:27 -05:00
616e925322
tentative mcu panning for mixbus. hey, it compiles
2015-12-16 05:46:52 -05:00
ff76ef86b4
faderport: long press on fader mode buttons switches fader automation to manual/off; off button is never sent an LED state message to avoid fader disabling
2015-12-14 14:42:12 -05:00
e928edca32
faderport: fix setup of periodic callback (cut-n-paste error)
2015-12-14 14:41:38 -05:00
d59739d728
faderport: add 100msec (10Hz) periodic update to facilitate automation playback
2015-12-14 13:28:31 -05:00
40a352e8a1
faderport: disable automation state button mapping until (if ever) we can figure out why it kills the fader
2015-12-14 13:28:31 -05:00
cc607fa161
fix DEBUG_TRACE messages from faderport that used MackieControlProtocol via cut-n-paste
2015-12-14 13:28:31 -05:00
634321ba45
Fix Trim control range does not match control (issue #6696 )
2015-12-13 15:53:24 -08:00
29416edbbf
remove debug output
2015-12-13 08:38:54 -05:00
8bdab38d43
track add/remove of monitor and/or master busses in mackie support code.
...
Somehow fails to move master fader to correct position when monitor section is added
2015-12-13 08:33:09 -05:00
0103de801a
Mackie Control, fix timecode sometimes won't update. Do full display if transport moves faster than 800%.
2015-12-11 12:57:24 -08:00
14ef6017f6
add a few new actions to Faderport menus, and reorganize them slightly
2015-12-10 17:25:29 -06:00
548989fc75
Fix MCP send display value scaling.
2015-12-08 22:45:59 -08:00
2d03db51cd
there is no "default" mackie device profile
2015-12-09 00:19:15 -05:00
014f010489
if Mackie device profile name is empty, use a default name that makes sense and that will be rediscovered on next startup
2015-12-09 00:12:28 -05:00
fcf20ee91a
Set vpot to the same range as the fader. Fixes trim from -16 to -20.
2015-12-08 19:30:57 -08:00
6c99576250
faderport: stop trying to cache LED state (fixes various bugs); blink mute for muted-by-others; blink transport for speed != 1.0 && != 0
2015-12-08 11:09:50 -05:00
bbdd25205d
MCU: fix likely copypaste thinko in mcu panner knobs
2015-12-07 17:31:45 -06:00
3d79e3c116
adjust generic MIDI surface support to (1) properly use boost::shared_ptr<Port> (2) detect connection changes
2015-12-07 12:38:17 -05:00
2f48997dfb
remove unnecessary (?) conditional.
...
Given that we use "port" after the test, the test makes no sense
2015-12-07 12:38:17 -05:00
e3d2898c8d
more Faderport debugging, for windows
2015-12-04 18:11:05 -06:00
0a997f62cc
remove spurious printout
2015-12-04 17:32:23 -06:00
e82cc88c6f
faderport: show current User button bindings in GUI
2015-12-03 21:45:41 -05:00
a9ce37b7ac
faderport: fix long press behaviour, and fix ardour-only behaviour with user button when used as a modifier
2015-12-03 18:38:09 -05:00
b07d86ac61
make faderport support report its port bundles as it should
2015-12-03 12:50:32 -05:00
900f59dcde
faderport: generalized blink on/off code
2015-12-03 08:36:56 -05:00
43e5d639cc
Faderport: Punch indictor was being left on after blinking
2015-12-03 07:27:42 -06:00
20facc4d18
Faderport: map automation indicator LEDs
2015-12-02 20:06:29 -06:00
16a100703b
GenericMidi: Partially working IO selectors.
...
2 remaining problems:
* IO selectors are not updated if you change the connection outside the dialog.
* occasional crash on the next startup, after a connection is made from the menu.
2015-12-02 19:18:22 -06:00
90275ded6a
faderport: a clever hack to make the Shift modifier "sticky"
...
The user can now press+release Shift, then another key OR press Shift, then another key before releasing Shift. Both
event sequences will have the same result
2015-12-02 17:40:58 -05:00
ba02c171f1
add session safeguards to OSC callbacks
2015-12-02 22:40:36 +01:00
Johannes Mueller
f11e18555e
Cleanup to make it coding style compliant.
2015-12-02 22:38:29 +01:00
Johannes Mueller
4a429fab0e
Add support to signal the transport state by OSC
...
Implement transport_speed in the same style like transport_frame. Up to
now transport_speed and record_enabled are implemented.
2015-12-02 22:38:29 +01:00
aaebeb3d2b
fix typo in variable name
2015-12-02 00:59:32 +01:00
0544e74fdf
merge from mixbus branch.
...
keep control surfaces special cases upstream.
2015-12-02 00:55:01 +01:00
b0fe298f72
faderport: factor out encoder divider into a const double
2015-12-01 18:47:29 -05:00
ee9524c9b6
faderport: make punch button LED indicate punch status
2015-12-01 18:45:43 -05:00
fd44adfe01
faderport: change panning dividers to give full range across very roughly 270 degrees of rotation
2015-12-01 18:32:55 -05:00
cb965cba16
start tweaks to make Shift sticky; remove Shift-press combobox from gui since we don't allow that to be bound (next-marker)
2015-12-01 16:19:16 -05:00
37961a6bbe
faderport: switch long-press mechanism to a timeout
...
This makes the long press action fire after the timeout even if the user is still holding the button,
which feels more satisfactory
2015-12-01 13:15:38 -05:00
03a4926790
faderport: allow User button to be bound to ANY possible action.
...
This does involve nagivating some really gnarly menus, which is unfortunate, but we don't have a good general
solution for this yet (it is fundamentally the same problem that affects the key binding editor and Mackie support
2015-12-01 11:20:09 -05:00
0e629cd162
faderport: add punch action
2015-12-01 10:35:37 -05:00
0c9fd363ca
faderport: GUI tweaks
2015-12-01 10:35:37 -05:00
daf02e8c73
remove "medium-length" press concept from faderport code and GUI
2015-12-01 09:23:08 -05:00
620f1caf23
faderport: stick a nice little image of the faderport in the surface GUI
...
Ideally, the PNG file would be part of the surface GUI but for now just put the PNG into gtk2_ardour/icons
2015-12-01 09:23:08 -05:00
254c1e2c91
faderport: correctly restore mix/proj/trns state from XML
2015-11-30 20:54:23 -05:00
41d0336f80
faderport: cleanup
2015-11-30 20:34:51 -05:00
f1dd53e37a
faderport: add some "curated" actions for mix, proj and trns; make new bindings use release, not press
2015-11-30 15:05:30 -05:00
b8ed62453f
faderport: restore button actions, and correctly indicate current action in GUI
2015-11-30 13:50:33 -05:00
682e152aaf
faderport: some code cleanups, add timing for button presses, add new comboboxes to GUI to allow more button programming, save button state
2015-11-30 12:51:18 -05:00
149f6795bb
no-op: add comment to faderport button ID definitions
2015-11-29 11:58:36 -05:00
73d1de3b75
NOOP, remove trailing whitespace, replace tabs in python scripts
2015-11-29 17:54:31 +01:00
c6dfb947eb
faderport: add two functioning actions for the mix button
2015-11-29 11:43:14 -05:00
6380403dad
basic structure for Faderport GUI
...
Not fully functional (or sensible yet) but the pieces are all there
2015-11-29 11:33:23 -05:00
bbaa5c6f45
faderport: shift+encoder controls pan width (for ardour only), input trim now controlled by user+encoder.
...
User is now a modifier key
2015-11-27 16:41:26 -05:00
779ec041b5
faderport: basic panning via encoder knob.
...
Doesn't help with 2=>2 panner, where width control is also required
2015-11-27 16:34:01 -05:00
b842495be0
fadeport: make fader touch work
2015-11-27 10:22:01 -05:00
3893f62657
Mackie Control: Disable Selected group in User/Selected view mode to allow individual adjustment.
2015-11-26 06:55:25 -08:00
d138f8981d
implement more Faderport buttons (window and fader automation). ToDo: automation LEDs, fader banking
2015-11-25 17:33:49 -06:00
d6186fba32
use human readable port-names in Mackie config.
2015-11-26 00:30:52 +01:00
e1794ae678
faderport: simpler logic for master/monitor/other
...
When choosing master or monitor, do NOT save master or monitor as the pre_{master,monitor}_route under
any circumstances. This means that master/monitor choices do not stack, and just switch between them.
2015-11-25 17:56:22 -05:00
e1ea14f10a
faderport: handle mute for monitor out by using monitor processor ops; try to blink mute button when cut-all is in effect.
...
Still some logic bugs when switching between master, monitor and other
2015-11-25 17:20:00 -05:00
9cbab4070f
faderport: fix odd interaction when selecting master-then-monitor or monitor-then-master and toggling back
2015-11-25 16:55:14 -05:00
1450fc07c1
faderport: fix odd interaction when selecting master-then-monitor or monitor-then-master and toggling back
2015-11-25 16:51:53 -05:00
d53993fd83
faderport: output button is a toggle between master (or monitor) and currently used route
2015-11-25 16:47:20 -05:00
104ec39b50
faderport: enable "Output" button to select master out (or, with Shift, monitor out if it exists) as the target route
2015-11-25 16:34:11 -05:00
487ada6630
handle encoder changes. shift+knob = input trim. ToDo: panner control
2015-11-25 14:52:58 -06:00
4e014da61a
cruft removal from faderport code
2015-11-25 13:37:00 -05:00
dd6cbac20e
faderport: implement fader support
2015-11-25 13:37:00 -05:00
fe06e3b7e8
faderport: track GUI selection, use first selected route; implement mute, solo, rec
2015-11-25 12:38:22 -05:00
68da5a1402
faderport: put back the working version of operations.cc
2015-11-25 07:35:50 -05:00
3ded5fc3f6
stub file to enable nightly builds
2015-11-24 23:37:49 -06:00
000b11dc4d
faderport: more global button functions added
2015-11-24 23:41:10 -05:00
2e3721ecf4
add goto_zero() function for BasicUI
2015-11-24 23:40:54 -05:00
7ae380c7f6
faderport: more interesting behaviour for the play button (locate to last start if pressed while rolling, then keep rolling)
2015-11-24 23:31:29 -05:00
9c64d63ebb
clarify a DEBUG_TRACE remark
2015-11-24 23:29:03 -05:00
e7a3a5ab9c
faderport: make loop, prev marker, next marker and marker buttons do stuff
2015-11-24 23:27:55 -05:00
35577f439d
add debug "bits" for FaderPort
2015-11-24 23:20:39 -05:00
2ea4d5c7b5
faderport: allow forcing LED state for use in ::all_lights_out()
2015-11-24 23:13:02 -05:00
34d847e060
faderport: fix modifiers for rewind, stop, undo etc ; listen to session transport signals and display state with button LEDs; add blinking
2015-11-24 23:06:19 -05:00
3a86b386fa
fadeport: restructure button info actions to allow modifiers (shift, rewind, stop) and set up undo and shift-undo (redo)
2015-11-24 22:32:40 -05:00
7c8cc3cfa9
give the faderport its own thread and event loop, rather than riding on the back of the MIDI UI thread in libardour
2015-11-24 21:41:44 -05:00
8765359db2
faderport: after connecting, turn off all lights, then party with them, then turn them all off
2015-11-24 21:10:22 -05:00
84ebad120e
add some faderport infrastructure for button handling, and bind up the transport functions to their obvious methods
2015-11-24 21:02:18 -05:00
9106512000
namespace and filename cleanup
2015-11-24 20:12:12 -05:00
ff62cec27d
remove debugging output
2015-11-24 18:20:24 -05:00
b280301a65
create data structure to handle the fact that faderport firmware 1.38 uses different button IDs for input and output (!!!)
2015-11-24 18:20:07 -05:00
a15cf9f0b3
get faderport i/o working, basics of identifying control activity
2015-11-24 18:00:11 -05:00
2f1cdd3ffe
rough-in for faderport protocol backend
2015-11-24 14:18:14 -06:00
3c9b71b50e
allow use of (N)RPN messages in generic MIDI binding maps (UNTESTED)
2015-11-23 12:27:51 -05:00
fb96170178
Fix fader in mackie control to work with groups.
2015-11-14 10:39:53 -08:00
09672f4a50
Mackie Control: Initialize vpot assignment on start-up.
2015-11-06 19:28:24 -08:00
ace771bc91
Mackie Control: Add send functionality to vpot assign section.
2015-11-06 16:18:13 -08:00
84d44eb5a3
Don't handle possible phase change if no audio channels in mackie control
2015-11-01 19:25:45 -08:00
8ae23c6952
Fix Mackie surface phase control for flip and more than one audio channel.
2015-11-01 15:30:36 -08:00
2e9de2def0
Added Phase control mackie controls as part of the Trim (track) vpot assignment.
2015-11-01 13:35:02 -08:00
7c24957d30
Changed MCP trim detection to match method used in GUI.
2015-10-25 08:22:02 -07:00
96c6da0804
Make mackie control view mode save bank for all modes.
...
Also moved duplicated code to one function.
2015-10-22 15:30:34 -07:00
7a453d2329
Make sure Mackie Control view modes start with route 1 except Mixer mode goes to last position.
2015-10-20 19:31:04 -07:00
81f6ad0d0c
Added "Selected" view mode to Mackie Control.
2015-10-20 18:54:56 -07:00
48f91c6ef4
Add Audio Tracks and Busses too.
2015-10-18 19:55:56 -07:00
0185c9f25a
Added Midi Tracks View mode.
2015-10-18 18:13:16 -07:00
f7e3117c3b
Only display Trim for tracks that have Trim. On the way:
...
-fixed flip mode.
-fixed no controlable for vpot or fader
2015-10-18 07:38:40 -07:00
5461b50cdb
Assign Global view to get back to Mixer.
2015-10-17 16:23:46 -07:00
334cc37e1b
Reduced delay in last commit/10
2015-10-14 05:55:10 -07:00
1f85691870
fix MCP ports hang on device change and multi-surface device reconnect.
2015-10-13 22:19:36 -07:00
53a28c230a
mackie support omnibus patch
...
Fixes all kinds of miscellaneous issues with MCP. Also removes several theoretical pan modes, replace "Tracks"
pan mode with "Trim", and takes a tiny step towards view modes
2015-10-13 15:34:53 -04:00
0043dc38a3
introduce separate-meters concept for Mackie.
...
Devices like the SSL Nucleus have meters displayed separately from their 55x2 display
2015-10-13 10:04:58 -04:00
3169ac0444
fix the design of Mackie XML state management
2015-10-13 07:33:27 -04:00
fbdb4c602e
more corrections for mackie GUI layout
2015-10-13 07:33:27 -04:00
ef08cd6e4a
move incorrectly packed touch sensitivity slider for Mackie GUI
2015-10-13 07:33:27 -04:00
8e83ca5753
Only flip if not already in desired state. Fixes fader jerk on banking.
2015-10-12 13:52:10 -07:00
1eb1391cfd
expose terminal, rather than just physical, MIDI ports in Mackie GUI
2015-10-12 14:42:49 -04:00
d4e0e8e963
make MCP port buttons work
2015-10-12 13:36:22 -04:00
79113144ef
Correct wrong value on LCD strip when fader is touched (fixs #6619 from Petr Vejsada)
2015-10-11 23:24:14 -07:00
796e404819
Don't use old session connections on MCP device change, Solves crash on device change.
2015-10-11 22:27:13 -07:00
104f43ad37
Fix MCP extension number and get master on right surface.
2015-10-11 21:37:04 -07:00
f8875df18f
Several changes to Mackie support. Breaks existing Mackie state on disk but not
...
in any way that causes problems, just loss of pre-existing connectivity.
1. retain state of current device (and serialize to disk) when switching
devices, and restore that state when switching back to it.
2. fix port and surfacenaming.
3. fix bundle assembly so that all ports (for multi-surface combos) work.
4. rationalize master position numbering
5. add small sleep before starting device handshake after reconnection. This
is ugly but seems to be necessary, unfortunately.
2015-10-11 12:01:27 -04:00
6faec91dd9
Force Flip normal before Bank ( fixes #6630 )
2015-10-10 19:59:29 -07:00
7535947eb1
Display parameter that matches mode.
2015-10-10 19:40:28 -07:00
965b135842
numerous changes to Mackie support, generally offering better robustness
2015-10-10 17:14:30 -04:00
9b5a071c33
varied and wide changes to get input and output combos closer to working
2015-10-09 14:01:22 -04:00
7e771c9fdc
move location where port handling stops during Mackie::Surface destructor
2015-10-09 11:12:28 -04:00
6acd51d48e
NOOP: whitespace/indent fix
2015-10-09 11:11:36 -04:00
03018aeefb
add TrimAutomation to list of possible pot parameters for routes
2015-10-09 11:11:15 -04:00
d700576171
remove unused and useless stuff relating to bundles inside Mackie::Strip
...
What was someone (Paul? John ?) thinking?
2015-10-09 11:10:44 -04:00
9c7139e505
set up control_by_parameter map in a Mackie::Strip so that subsequent array-syntax lookup does not crash
2015-10-09 11:09:47 -04:00
6bcbace73a
add device-info specific component to Mackie GUI to allow direct wiring of MIDI ports (non-functional)
2015-10-08 21:55:38 -04:00
8338fd8ac6
add DeviceChanged signal to MCP and make surface lock mutable for use in const methods.
...
Also add nth_surface() API to MackieControlProtocol
2015-10-08 21:55:38 -04:00
36088b53b1
add new API to access AsyncMIDIPort members of Mackie Surface port
2015-10-08 21:55:38 -04:00
bda0ba173c
for an ipMIDI surface, make the GSource used for input hold the only reference on the GUIChannel.
2015-10-08 21:55:37 -04:00
7e10c21468
make Mackie::Surface keep a reference to the input source+channel and clean up in destructor
2015-10-08 21:55:37 -04:00
33fe33f268
fix initialization sequence for ipMIDI Mackie surfaces
2015-10-08 15:28:37 -04:00
0c448c387b
fix crash when switching from regular MIDI to ipMIDI Mackie surface
2015-10-08 15:28:21 -04:00
d3efef7f5c
fix logic to reshow strip "name" after a message display
2015-10-08 14:58:28 -04:00
02181174c3
remove debugging display of message on MCP device
2015-10-08 14:51:27 -04:00
49be513bfa
fix rebase conflicts left over after pull
2015-10-08 13:40:00 -04:00
0cb1c7b58c
lots of changes to try to get the Mackie Control display be more useful and usable
2015-10-08 12:51:44 -04:00
4677d047a5
more mackie strip redisplay renames, and add a global block to redisplays\n
2015-10-08 12:51:18 -04:00
0f978a90f4
subtle rework/rename of per-strip revert-to-vpot-display code
2015-10-08 12:50:05 -04:00
4a1790b75e
remove unused per-surface button timer
2015-10-08 12:50:05 -04:00
6899bd7c15
Add Trim to Mackie controls.
2015-10-07 21:36:16 -07:00
c9658134ce
add button time and explicit bank switching to MCP support
2015-10-07 15:13:03 -04:00
ce9b271a92
track Mackie MIDI port connection status as primary trigger for handshake with device
2015-10-07 13:17:49 -04:00
2397429e99
use quotes for in-tree pbd/glib wrapper include
2015-10-05 22:15:18 +02:00
97bd6db2b7
remove i/ofstream from libardour
...
except:
* audio-unit (ifstream is known to work on OSX)
* evoral curve algorithm debugger
* cycle-timer debug code
* export_handler's CDMarker -> TODO
2015-10-05 22:15:17 +02:00
33d614359a
only use HUI heartbeat with HUI devices
2015-10-05 12:24:15 -04:00
22b07e0233
NOOP, remove trailing tabs/whitespace.
2015-10-05 16:17:49 +02:00
4dc63966f0
globally remove all trailing whitespace from ardour code base.
...
Paul Davis was responsible for introducing almost all of this.
2015-10-04 14:51:05 -04:00
cf33204e35
always use session rt-event to un/set solo
2015-10-04 02:04:59 +02:00
a333edcb28
Initialize variable every loop so MCP devices don't accumulate too.
2015-10-03 13:15:18 -07:00
4b69495f82
Initialize variable every loop so MCP profiles don't accumulate.
2015-10-03 13:06:34 -07:00
2dddf6504b
NOOP: delete trailing whitespace
2015-10-03 14:03:29 -04:00
1e5672de98
reset IP MIDI port when deleting a mackie surface port
2015-10-03 13:51:17 -04:00
9d7b5f6df9
reset shared_ptr to master surface when clearing surfaces, to ensure Surface destructor is called
2015-10-03 13:50:59 -04:00
4403ce4bd4
make a start on providing direct choice of MIDI ports where an MCP device can be reached
2015-10-03 13:13:58 -04:00
91d3aabf53
NOOP: reformat indentation
2015-10-03 13:13:58 -04:00
76398911d4
more code-control when laying out Mackie Control GUI panel
2015-10-03 13:13:58 -04:00
6bf0d4f627
add basic support for HUI heartbeat, only used for HUI devices
2015-10-03 13:13:58 -04:00
4ef45aacc1
add DeviceType specifier for mackie devices.
...
Incomplete, because we need a way to handle multiple devices of different types
2015-10-03 13:13:58 -04:00
13765d41e3
NOOP: reformat indentation
2015-10-03 13:13:58 -04:00
c8448cb0dd
add device type to Mackie device info
2015-10-03 13:13:57 -04:00
53c47e0ccd
add support to display and set key aliases in mackie GUI
2015-10-03 13:13:57 -04:00
f0c1d58f59
fix windows compilation
2015-10-03 11:20:15 +02:00
3733fd7f31
remove undefined and unused method declaration
2015-10-02 22:08:15 -04:00
0ee737f129
another change from modifier_state() to main_modifier_state()
2015-10-02 22:08:15 -04:00
c78426968f
avoid handling pitchbend (fader) messages while SHIFT modifier is active.
...
See comment in code for more detail
2015-10-02 22:08:15 -04:00
40a4e2e6af
no longer call ::zero_all() when deleting an MCP surface object.
...
The ports required may no longer exist, and it requires a lot of messages. A reset is sent instead
2015-10-02 22:08:14 -04:00
9476657cd1
use ::main_modifier_state() in some more places
2015-10-02 22:08:14 -04:00
ef6b0bdb07
necessary header changes for new redisplay code in MCP
2015-10-02 22:08:14 -04:00
4d47760d61
add new (fast) redisplay timer that pushes parameter display text to MCP device.
...
Changes are queued in a FIFO, and pulled when a timeout in the MCP event loop fires.
2015-10-02 22:08:14 -04:00
05a8107ff6
fix comment spelling
2015-10-02 22:08:14 -04:00
2cdfeda884
use Surface::reset() when deleting MackieControlProtocol, rather than sending lots of messages.
...
This may be a bit "strong" because on the MCU Pro (at least) it causes a fader recalibration.
2015-10-02 22:08:14 -04:00
ccf505c3a2
implement backlight, fader touch sensitivity and recalibrate fader functions for MCP GUI
2015-10-02 22:08:14 -04:00
04b9df1fd9
avoid sending replicated fader set position messages
2015-10-02 22:08:14 -04:00
918133a342
fix handler of fader (pitchbend) messages in Mackie Control so that the outbound messages match the inbound ones
...
Pitch bend values really can span 0 to 16384, not 16383
2015-10-02 10:22:00 -04:00
71bf231199
allow aliasing Mackie Control buttons to other buttons
2015-10-02 10:21:20 -04:00
5c63ed589c
catch changes in click status and alter LED appropriately
2015-10-02 07:32:56 -04:00
a4fced6d63
change zoom and scrub handling to use modifier bits
2015-10-02 07:32:56 -04:00
d28c8c9bb4
spelling correction in error message
2015-10-02 07:32:56 -04:00
239da0efb5
Fix Mackie control metering ( fixes #6608 ).
2015-09-28 20:13:15 -07:00
