a9a4cfb166
mackie: track compressor mode changes in display
2015-12-16 06:01:47 -05:00
1152bf87a2
make vselect-press in subview mode act as a toggle for toggled controls
2015-12-16 06:01:38 -05:00
a6da818bc4
add dynamics support to mackie control
2015-12-16 06:01:29 -05:00
e3d0de3bf6
mackie: use new route API for universal access to pan/eq/dynamics parameters to provide panning and EQ control
2015-12-16 06:01:20 -05:00
81179389d3
mackie: cleanup subview mode a little
2015-12-16 05:55:10 -05:00
8ba8f1c0b0
fix cherry-pick conflict
2015-12-16 05:54:43 -05:00
e302ce8662
only use 1/100th gap between markers if transport is stopped, to prevent repeated user action from adding multiple markers when stopped (mackie version)
2015-12-16 05:52:47 -05:00
a1ef99b9b7
add beginnings of EQ and dynamics control to mackie for mixbus
2015-12-16 05:52:36 -05:00
99764e946a
add UserA and UserB buttons to mackie button list
2015-12-16 05:52:27 -05:00
616e925322
tentative mcu panning for mixbus. hey, it compiles
2015-12-16 05:46:52 -05:00
ff76ef86b4
faderport: long press on fader mode buttons switches fader automation to manual/off; off button is never sent an LED state message to avoid fader disabling
2015-12-14 14:42:12 -05:00
e928edca32
faderport: fix setup of periodic callback (cut-n-paste error)
2015-12-14 14:41:38 -05:00
d59739d728
faderport: add 100msec (10Hz) periodic update to facilitate automation playback
2015-12-14 13:28:31 -05:00
40a352e8a1
faderport: disable automation state button mapping until (if ever) we can figure out why it kills the fader
2015-12-14 13:28:31 -05:00
cc607fa161
fix DEBUG_TRACE messages from faderport that used MackieControlProtocol via cut-n-paste
2015-12-14 13:28:31 -05:00
634321ba45
Fix Trim control range does not match control (issue #6696 )
2015-12-13 15:53:24 -08:00
29416edbbf
remove debug output
2015-12-13 08:38:54 -05:00
8bdab38d43
track add/remove of monitor and/or master busses in mackie support code.
...
Somehow fails to move master fader to correct position when monitor section is added
2015-12-13 08:33:09 -05:00
0103de801a
Mackie Control, fix timecode sometimes won't update. Do full display if transport moves faster than 800%.
2015-12-11 12:57:24 -08:00
14ef6017f6
add a few new actions to Faderport menus, and reorganize them slightly
2015-12-10 17:25:29 -06:00
548989fc75
Fix MCP send display value scaling.
2015-12-08 22:45:59 -08:00
2d03db51cd
there is no "default" mackie device profile
2015-12-09 00:19:15 -05:00
014f010489
if Mackie device profile name is empty, use a default name that makes sense and that will be rediscovered on next startup
2015-12-09 00:12:28 -05:00
fcf20ee91a
Set vpot to the same range as the fader. Fixes trim from -16 to -20.
2015-12-08 19:30:57 -08:00
6c99576250
faderport: stop trying to cache LED state (fixes various bugs); blink mute for muted-by-others; blink transport for speed != 1.0 && != 0
2015-12-08 11:09:50 -05:00
bbdd25205d
MCU: fix likely copypaste thinko in mcu panner knobs
2015-12-07 17:31:45 -06:00
3d79e3c116
adjust generic MIDI surface support to (1) properly use boost::shared_ptr<Port> (2) detect connection changes
2015-12-07 12:38:17 -05:00
2f48997dfb
remove unnecessary (?) conditional.
...
Given that we use "port" after the test, the test makes no sense
2015-12-07 12:38:17 -05:00
e3d2898c8d
more Faderport debugging, for windows
2015-12-04 18:11:05 -06:00
0a997f62cc
remove spurious printout
2015-12-04 17:32:23 -06:00
e82cc88c6f
faderport: show current User button bindings in GUI
2015-12-03 21:45:41 -05:00
a9ce37b7ac
faderport: fix long press behaviour, and fix ardour-only behaviour with user button when used as a modifier
2015-12-03 18:38:09 -05:00
b07d86ac61
make faderport support report its port bundles as it should
2015-12-03 12:50:32 -05:00
900f59dcde
faderport: generalized blink on/off code
2015-12-03 08:36:56 -05:00
43e5d639cc
Faderport: Punch indictor was being left on after blinking
2015-12-03 07:27:42 -06:00
20facc4d18
Faderport: map automation indicator LEDs
2015-12-02 20:06:29 -06:00
16a100703b
GenericMidi: Partially working IO selectors.
...
2 remaining problems:
* IO selectors are not updated if you change the connection outside the dialog.
* occasional crash on the next startup, after a connection is made from the menu.
2015-12-02 19:18:22 -06:00
90275ded6a
faderport: a clever hack to make the Shift modifier "sticky"
...
The user can now press+release Shift, then another key OR press Shift, then another key before releasing Shift. Both
event sequences will have the same result
2015-12-02 17:40:58 -05:00
ba02c171f1
add session safeguards to OSC callbacks
2015-12-02 22:40:36 +01:00
Johannes Mueller
f11e18555e
Cleanup to make it coding style compliant.
2015-12-02 22:38:29 +01:00
Johannes Mueller
4a429fab0e
Add support to signal the transport state by OSC
...
Implement transport_speed in the same style like transport_frame. Up to
now transport_speed and record_enabled are implemented.
2015-12-02 22:38:29 +01:00
aaebeb3d2b
fix typo in variable name
2015-12-02 00:59:32 +01:00
0544e74fdf
merge from mixbus branch.
...
keep control surfaces special cases upstream.
2015-12-02 00:55:01 +01:00
b0fe298f72
faderport: factor out encoder divider into a const double
2015-12-01 18:47:29 -05:00
ee9524c9b6
faderport: make punch button LED indicate punch status
2015-12-01 18:45:43 -05:00
fd44adfe01
faderport: change panning dividers to give full range across very roughly 270 degrees of rotation
2015-12-01 18:32:55 -05:00
cb965cba16
start tweaks to make Shift sticky; remove Shift-press combobox from gui since we don't allow that to be bound (next-marker)
2015-12-01 16:19:16 -05:00
37961a6bbe
faderport: switch long-press mechanism to a timeout
...
This makes the long press action fire after the timeout even if the user is still holding the button,
which feels more satisfactory
2015-12-01 13:15:38 -05:00
03a4926790
faderport: allow User button to be bound to ANY possible action.
...
This does involve nagivating some really gnarly menus, which is unfortunate, but we don't have a good general
solution for this yet (it is fundamentally the same problem that affects the key binding editor and Mackie support
2015-12-01 11:20:09 -05:00
0e629cd162
faderport: add punch action
2015-12-01 10:35:37 -05:00
0c9fd363ca
faderport: GUI tweaks
2015-12-01 10:35:37 -05:00
daf02e8c73
remove "medium-length" press concept from faderport code and GUI
2015-12-01 09:23:08 -05:00
620f1caf23
faderport: stick a nice little image of the faderport in the surface GUI
...
Ideally, the PNG file would be part of the surface GUI but for now just put the PNG into gtk2_ardour/icons
2015-12-01 09:23:08 -05:00
254c1e2c91
faderport: correctly restore mix/proj/trns state from XML
2015-11-30 20:54:23 -05:00
41d0336f80
faderport: cleanup
2015-11-30 20:34:51 -05:00
f1dd53e37a
faderport: add some "curated" actions for mix, proj and trns; make new bindings use release, not press
2015-11-30 15:05:30 -05:00
b8ed62453f
faderport: restore button actions, and correctly indicate current action in GUI
2015-11-30 13:50:33 -05:00
682e152aaf
faderport: some code cleanups, add timing for button presses, add new comboboxes to GUI to allow more button programming, save button state
2015-11-30 12:51:18 -05:00
149f6795bb
no-op: add comment to faderport button ID definitions
2015-11-29 11:58:36 -05:00
73d1de3b75
NOOP, remove trailing whitespace, replace tabs in python scripts
2015-11-29 17:54:31 +01:00
c6dfb947eb
faderport: add two functioning actions for the mix button
2015-11-29 11:43:14 -05:00
6380403dad
basic structure for Faderport GUI
...
Not fully functional (or sensible yet) but the pieces are all there
2015-11-29 11:33:23 -05:00
bbaa5c6f45
faderport: shift+encoder controls pan width (for ardour only), input trim now controlled by user+encoder.
...
User is now a modifier key
2015-11-27 16:41:26 -05:00
779ec041b5
faderport: basic panning via encoder knob.
...
Doesn't help with 2=>2 panner, where width control is also required
2015-11-27 16:34:01 -05:00
b842495be0
fadeport: make fader touch work
2015-11-27 10:22:01 -05:00
3893f62657
Mackie Control: Disable Selected group in User/Selected view mode to allow individual adjustment.
2015-11-26 06:55:25 -08:00
d138f8981d
implement more Faderport buttons (window and fader automation). ToDo: automation LEDs, fader banking
2015-11-25 17:33:49 -06:00
d6186fba32
use human readable port-names in Mackie config.
2015-11-26 00:30:52 +01:00
e1794ae678
faderport: simpler logic for master/monitor/other
...
When choosing master or monitor, do NOT save master or monitor as the pre_{master,monitor}_route under
any circumstances. This means that master/monitor choices do not stack, and just switch between them.
2015-11-25 17:56:22 -05:00
e1ea14f10a
faderport: handle mute for monitor out by using monitor processor ops; try to blink mute button when cut-all is in effect.
...
Still some logic bugs when switching between master, monitor and other
2015-11-25 17:20:00 -05:00
9cbab4070f
faderport: fix odd interaction when selecting master-then-monitor or monitor-then-master and toggling back
2015-11-25 16:55:14 -05:00
1450fc07c1
faderport: fix odd interaction when selecting master-then-monitor or monitor-then-master and toggling back
2015-11-25 16:51:53 -05:00
d53993fd83
faderport: output button is a toggle between master (or monitor) and currently used route
2015-11-25 16:47:20 -05:00
104ec39b50
faderport: enable "Output" button to select master out (or, with Shift, monitor out if it exists) as the target route
2015-11-25 16:34:11 -05:00
487ada6630
handle encoder changes. shift+knob = input trim. ToDo: panner control
2015-11-25 14:52:58 -06:00
4e014da61a
cruft removal from faderport code
2015-11-25 13:37:00 -05:00
dd6cbac20e
faderport: implement fader support
2015-11-25 13:37:00 -05:00
fe06e3b7e8
faderport: track GUI selection, use first selected route; implement mute, solo, rec
2015-11-25 12:38:22 -05:00
68da5a1402
faderport: put back the working version of operations.cc
2015-11-25 07:35:50 -05:00
3ded5fc3f6
stub file to enable nightly builds
2015-11-24 23:37:49 -06:00
000b11dc4d
faderport: more global button functions added
2015-11-24 23:41:10 -05:00
2e3721ecf4
add goto_zero() function for BasicUI
2015-11-24 23:40:54 -05:00
7ae380c7f6
faderport: more interesting behaviour for the play button (locate to last start if pressed while rolling, then keep rolling)
2015-11-24 23:31:29 -05:00
9c64d63ebb
clarify a DEBUG_TRACE remark
2015-11-24 23:29:03 -05:00
e7a3a5ab9c
faderport: make loop, prev marker, next marker and marker buttons do stuff
2015-11-24 23:27:55 -05:00
35577f439d
add debug "bits" for FaderPort
2015-11-24 23:20:39 -05:00
2ea4d5c7b5
faderport: allow forcing LED state for use in ::all_lights_out()
2015-11-24 23:13:02 -05:00
34d847e060
faderport: fix modifiers for rewind, stop, undo etc ; listen to session transport signals and display state with button LEDs; add blinking
2015-11-24 23:06:19 -05:00
3a86b386fa
fadeport: restructure button info actions to allow modifiers (shift, rewind, stop) and set up undo and shift-undo (redo)
2015-11-24 22:32:40 -05:00
7c8cc3cfa9
give the faderport its own thread and event loop, rather than riding on the back of the MIDI UI thread in libardour
2015-11-24 21:41:44 -05:00
8765359db2
faderport: after connecting, turn off all lights, then party with them, then turn them all off
2015-11-24 21:10:22 -05:00
84ebad120e
add some faderport infrastructure for button handling, and bind up the transport functions to their obvious methods
2015-11-24 21:02:18 -05:00
9106512000
namespace and filename cleanup
2015-11-24 20:12:12 -05:00
ff62cec27d
remove debugging output
2015-11-24 18:20:24 -05:00
b280301a65
create data structure to handle the fact that faderport firmware 1.38 uses different button IDs for input and output (!!!)
2015-11-24 18:20:07 -05:00
a15cf9f0b3
get faderport i/o working, basics of identifying control activity
2015-11-24 18:00:11 -05:00
2f1cdd3ffe
rough-in for faderport protocol backend
2015-11-24 14:18:14 -06:00
3c9b71b50e
allow use of (N)RPN messages in generic MIDI binding maps (UNTESTED)
2015-11-23 12:27:51 -05:00
fb96170178
Fix fader in mackie control to work with groups.
2015-11-14 10:39:53 -08:00
09672f4a50
Mackie Control: Initialize vpot assignment on start-up.
2015-11-06 19:28:24 -08:00
