291aec468f
use session stripable selection API
...
and remove old ControlProtocol signals to talk to GUI etc.
2016-07-04 12:45:53 -04:00
b27d9bb02a
OSC: select is global not per surface.
2016-07-04 08:27:16 -07:00
14c50b317c
operate directly on realtime controls, not via Session
2016-07-04 09:27:33 -04:00
a373e4cfc8
UI: Add editor_mixer route pointer to session so all UIs can know the same current_strip even in a selected group.
2016-07-03 18:22:09 -07:00
e6621c4405
OSC: select off by one bug, something must have changed by 1, fixed
2016-07-03 15:28:03 -07:00
661123c756
OSC: Account for some select edge cases
2016-07-01 21:21:08 -07:00
6ed7336384
OSC: make sure out of bank strip can not be converted to a stripable.
2016-07-01 18:31:13 -07:00
3491f22c04
OSC: Don't look for which stripable is selected until we actually need it, It may be wrong at application start.
2016-07-01 18:12:31 -07:00
55722a74fb
OSC: Change all time feedback to /position/<type>
2016-07-01 17:28:08 -07:00
7f712ddd4c
OSC: Select tweak.
2016-06-29 19:57:13 -07:00
95beda06d9
OSC: Reworked select to follow Gui selected strip regardless of it's inclusion in bank
2016-06-29 19:38:17 -07:00
f3dd9eef8b
OSC: master/monitor forced to sort at end
2016-06-22 14:50:13 -07:00
844bf70002
OSC: Fix math off by one, Check for all stripable controls because VCAs have less (crash fix)
2016-06-22 14:10:59 -07:00
64d7a82a52
fix gcc4 builds C++98
...
Flag is an enum -- not a class nor namespace
2016-06-22 16:18:07 +02:00
cad5ed4f21
OSC: Might help if I used the right variable, Really fix select.
2016-06-21 20:31:53 -07:00
74806a43c9
OSC: Fix out of range track. (crash)
2016-06-21 19:19:07 -07:00
daddf2179f
OSC: Add strip type selection.
2016-06-21 18:47:43 -07:00
557031ca11
Remove confusion over ambiguous symbols
...
libboost and libsigc++ both contain symbols called _1() / _2() etc. Forcing the use of namespace sigc causes us to use the ones from sigc++ when in fact, we want the ones from boost.
Hopefully this fix will work for all compilers.
2016-06-18 11:41:12 +01:00
6ca3c67046
Use Glib::usleep() for consistency
2016-06-18 11:34:14 +01:00
f4047b9a26
OSC: take care of track order changes too. Deal with mixer topology changes one time.
2016-06-16 19:41:39 -07:00
3754859f2f
OSC: Blank some more feedback values when select observer is destroyed.
2016-06-16 16:07:09 -07:00
dcf852aae4
OSC: Catch new strips, gone strips and redo banks and observers. Add more select feedback.
2016-06-13 11:57:15 -07:00
21bf61d559
MackieControl: in sends subview, if there are no sends for a vpot, drop the controllable for the vpot
2016-06-12 08:44:34 -04:00
beafe2be6e
fix MCP Cancel button "escape" action
2016-06-12 08:43:24 -04:00
a8d7b0fca3
redesign/reimplement selection knowledge in MackieControlProtocol object
...
strips listen to Stripable::presentation_info().PropertyChange, and forward selected status changes
to the MCP object
2016-06-12 08:19:16 -04:00
4717080aee
reduce verbosity of -D mackie in the presence of continued handshaking/keepalive messages.
2016-06-12 08:18:01 -04:00
3d9517c22f
OSC: Add send enable control.
2016-06-11 13:57:27 -07:00
63e6378713
OSC: added solo isolate and solo safe/lock.
2016-06-11 12:09:15 -07:00
1695de335d
OSC: Constrain master pan position as width requires.
2016-06-10 13:45:07 -07:00
b588308bed
OSC: force non-active controls to zero. Keep pan within range wide allows.
2016-06-10 13:05:58 -07:00
2d4358ddb5
Various changes to PresentationInfo and a small consolidation of sorters.
...
The semantics for sorting PresentationInfo are up to the caller, not the
PresentationInfo object, so operator<() was removed and callers specifically
invoke ::order() for sorting.
2016-06-10 13:57:18 -04:00
3eaa6c0389
remove certain ControlProtocol signals related to stripable selection
...
includes change to Mackie support so that strips listen for PropertyChange
on the stripables they represent, no global selection change used anymore.
2016-06-10 13:57:18 -04:00
f65713c426
OSC: Finished Select send levels
2016-06-09 18:33:00 -07:00
049a678ff9
OSC: change the word phase to polarity as per mailing list.
2016-06-09 15:24:43 -07:00
37aed5715b
OSC: add phase control
2016-06-09 12:07:57 -07:00
4905422a47
OSC: Added pan width to selected
2016-06-09 11:11:48 -07:00
199f20ff2c
namespace required
2016-06-09 13:24:35 -04:00
3e29a46603
OSC: select commands for pan and trim added, feedback for select sends. GUI_select feedback done.
2016-06-08 23:08:56 -07:00
f05ff9570e
fix faderport's use of action name
2016-06-07 19:25:33 -04:00
d511d62f65
OSC: reset select strip on bank change or select for non-existing stripable.
...
Fixes crash when selecting unused strip and then changing bank.
2016-06-06 23:40:35 -07:00
ee1046bbed
OSC: Respond to GUI select.
2016-06-06 14:54:33 -07:00
cb7e8025f2
Accommodate newly introduced source(s) in our MSVC project (ardour_osc)
...
(also, libardour_osc now needs to link to libardour_timecode)
2016-06-06 09:06:08 +01:00
cce4726c4c
OSC: More controls in /select/*, off by one fixed
2016-06-05 22:30:14 -07:00
91ad3ef81d
don't connect to individual PresentationInfo signals per Stripable; we only reorder strips once, when the global signal arrives
2016-06-05 16:33:02 -04:00
dfcc8fd547
Stripable signals moved to PresentationInfo
2016-06-05 16:33:02 -04:00
6637260ac9
Stripable signals moved to PresentationInfo
2016-06-05 16:33:02 -04:00
03d2939f27
OSC: Added feedback for /select
2016-06-05 07:25:54 -07:00
3f336f2021
OSC: Bug fix for no monitor, bug fix heart beat on turned global feedback on.
...
Start select code.
2016-06-04 07:04:32 -07:00
ee0f073e8d
move from PresentationInfo::global_order() to PresentationInfo::order
2016-06-03 15:15:39 -04:00
6e258e0ade
OSC: Fixed some button type commands to have path only as well as path f
2016-06-01 14:27:30 -07:00
38ab8dee90
Accommodate recently introduced source(s) in our MSVC project (ardour_osc)
2016-06-01 14:30:28 +01:00
d60200c899
OSC: finish /set_surface group of commands.
2016-05-31 22:04:25 -07:00
9ff3c55e34
OSC: Paths changed, feedback added, etc.
2016-05-31 14:09:38 -07:00
f03f2e5c3f
use new record safe control in surface support
2016-05-31 15:30:45 -04:00
28afaebdc4
fix SNAFU in which Stripable::rec_enable_control() was incorrectly defined as ::recenable_control()
...
Make Mackie support code use the Stripable to access the rec-enable control while we're here
2016-05-31 15:30:45 -04:00
a2704dbff8
use correct signal to select route from generic MIDI, and add explanatory comment
2016-05-31 15:30:43 -04:00
08f01085de
remove now-redundant control protocol route-selection signals
2016-05-31 15:30:43 -04:00
c438ba2b6e
remove no-longer-used TrackSelectionChanged signal from ControlProtocol
2016-05-31 15:30:43 -04:00
0d9433aef6
remove no-effect handling of route active-status change in Mackie Control code
2016-05-31 15:30:43 -04:00
9d2538ae72
remove any reference to Route in Generic MIDI support (basically a NO-OP)
2016-05-31 15:30:43 -04:00
cefd3ac8be
convert faderport to use Stripable instead of Route
2016-05-31 15:30:43 -04:00
186209c03c
fix crash in mackie code caused by assumption that all Stripables have meters
2016-05-31 15:30:43 -04:00
4b0a235f91
manually fix rebase/merge issues for Mackie Control support
2016-05-31 15:30:42 -04:00
4b7bbacaaa
make mackie surfaces aware of VCAs
2016-05-31 15:30:42 -04:00
c34ad3a723
convert Mackie Control Surface support to use Stripable, not Route
2016-05-31 15:30:42 -04:00
dd57a83793
add Stripable analogs for Route signals and methods in ControlProtocol
...
These will go away once all surfaces have migrated to Stripables
2016-05-31 15:30:42 -04:00
8346fab567
remove irrelevant, out of date and incorrect comment
2016-05-31 15:30:42 -04:00
d5127001bb
move ControllableDescriptor from libpbd to libardour; add support for describing VCAs
2016-05-31 15:30:42 -04:00
e0ff70cf86
first vaguely working version using PresentationInfo
...
remote control ID and "order keys" have been removed.
2016-05-31 15:30:42 -04:00
5b5e64d860
remove Route::listening_via_monitor()
...
This is better tested with direct use of the solo_control and
Config->get_solo_controls_are_listen_controls()
2016-05-31 15:30:41 -04:00
69250b64ea
move ever close to working master/slave logic, this time with audio testing
2016-05-31 15:30:41 -04:00
653ae4acd6
universal change in the design of the way Route/Track controls are designed and used. The controls now own their own state, rather than proxy for state in their owners.
...
Massive changes all over the code to accomodate this. Many things are not finished. Consider this a backup safety commit
2016-05-31 15:30:40 -04:00
4b36593106
fix faderport and mackie to use route AutomationControls to be notified about solo/mute changes
2016-05-31 15:30:40 -04:00
aee283f056
use redesigned Route and VCA object architecture/API
2016-05-31 15:30:39 -04:00
nick_m
34c9ac9dd7
Tempo ramps - rename bbt_time() -> bbt_at_frame(), frame_time() -> frame_at_bbt()
2016-05-27 23:38:17 +10:00
b0200b23f2
Accommodate the fact that 'msvc_resources.rc.in' got moved to a new path
2016-05-21 10:33:18 +01:00
3060b7bbc4
upper parameter limit is inclusive.
2016-05-14 16:14:45 +02:00
ae7cc64377
copy-n-paste the ARDOUR_UI toggle-roll code into BasicUI (for Faderport and others)
2016-05-09 08:17:23 -04:00
672528baf4
fix shared_ptr<Route> management in Mackie support so that deleted routes are destroyed
2016-05-07 13:36:04 -04:00
17ace643e4
OMNIBUS COMMIT: prefer const XMLNode::property method (and provide a real one)
2016-05-04 23:09:45 -04:00
8b52b69810
make BasicUI (for control surfaces) loop toggle work like the GUI
2016-04-30 10:54:40 -04:00
4a226385b6
OSC: Fix Solo to work with both SIP and Listen.
2016-04-27 09:06:46 -07:00
622ba89dd9
OSC: removed unused _namespace_root variable.
2016-04-19 16:13:18 -07:00
40aa4cfe06
Modify our MSVC projects to build liblua as a DLL rather than a static lib
2016-04-04 16:40:20 +01:00
234b06a18c
OSC: Changed gainVCA to gainfader as VCA is already used.
2016-03-29 07:58:20 -07:00
3eb5f76edb
OSC: fix issue 6839, make all OSC gaindB values below -192, inf.
2016-03-27 17:46:14 -07:00
6c3559dc6c
OSC: added a linear VCA style gain control for faders that are 0 to 1 linear.
...
path = /ardour/routes/gainVCA if RID position
2016-03-26 11:38:19 -07:00
83bcaa1882
plug a tiny memory leak
2016-03-19 10:51:26 +01:00
ba78359129
prepare for update to waf 1.8
...
uselib is no longer implicit (inherited by .use). This is still incomplete,
some uselibs for non-linux variants may be missing.
bld.is_defined("HAVE_XXX") also no longer works and will have to be
changed (I think to bld.env["HAVE_XXX"]) in countless places.
2016-02-28 21:16:44 +01:00
d3634c5779
Accommodate 'lua' search paths in various projects where they're needed
...
(i.e. so that MSVC can find header files from lua).
2016-02-27 16:29:55 +00:00
c932c56233
cleanup post-rebase-against-master messes
2016-02-22 15:31:25 -05:00
bc487bb4b0
replicate the remove-all-trailing whitespace commit(s) in master
2016-02-22 15:31:24 -05:00
379bc35948
update Mackie code to use new API to get all actions
2016-02-22 15:31:24 -05:00
67e19c177f
radically change Keyboard/Binding API design to disconnect Gtk::Action lookup from binding definition
...
We need this because we need binding information/objects before all
Actions have been defined.
2016-02-22 15:31:24 -05:00
f519edbe8e
fix segfault in libardour unit-tests (possible crash in mackie sf)
2016-02-20 20:26:34 +01:00
318f3850de
third time lucky
2016-02-19 23:25:15 +01:00
452bca79eb
and now without typo
2016-02-19 23:19:19 +01:00
9633ea3b01
fix Windows OSC support
2016-02-19 23:16:38 +01:00
f8bc9c66a5
OSC: remove "/session/loaded" message altogether, for testing on Win.
2016-02-16 16:06:39 -06:00
de94f3ce83
fix typo in previous commit
2016-02-15 17:29:54 -06:00
