30b087ab3d
globally change all use of "frame" to refer to audio into "sample".
...
Generated by tools/f2s. Some hand-editing will be required in a few places to fix up comments related to timecode
and video in order to keep the legible
2017-09-18 12:39:17 -04:00
03e99e9866
fix longstanding compiler warning
2017-09-18 11:40:53 -04:00
fde0e293a3
Remove unused "mark" parameter from stop_touch() API
2017-07-24 01:59:18 +02:00
1138b62fb8
amend 5e5f7a55; re-add wrongly removed variable
2017-06-23 18:15:50 +02:00
66a3dd7ded
MCU: Remove use of AutomationType as ID, part two.
...
This may need some small tweaks for MB channelstrip to set
print-format (like LV2 plugins would) for cases where the default
value_as_string() differs.
2017-06-23 17:39:20 +02:00
5e5f7a55ee
MCU: Remove use of AutomationType as ID, part one.
2017-06-23 17:39:20 +02:00
d3738b087e
MCP: Fix issue with strip "select" buttons that stayed stuck on.
...
* Depending on individual strips to watch the selection property is prone to failure.
* Stripable_selection_changed() is called when a selection operation is completed.
2017-05-17 15:55:43 -05:00
60cc2823f3
MCP: map the well-known EQ knobs more explicitly, not heuristically.
2017-05-17 15:53:14 -05:00
3d26a29e8a
Sanitize "well-known" ctrl API
2017-05-14 00:17:11 +02:00
eb3f50e15c
change the way ControlProtocols (control surfaces) are notified and handle Stripable selection changes
...
The Editor continues to notify them, but via a direct call to ControlProtocolManager, not a signal.
The CP Manager calls the ControlProtocol static method to set up static data structures holding
selection info for all surfaces and then notifies each surface/protocol that selection has changed.
2017-05-12 14:51:39 +01:00
efc2660fec
MCP: Mixbus32C: Restore missing filter controls to the Dyn page.
2017-05-12 15:44:01 +02:00
0c035778e1
libardour now has CoreSelection object to manage selection status of Stripables and AutomationControls
2017-05-05 18:56:25 +01:00
d64ca9be08
Properly expose "well known" comp_redux output.
2017-04-12 21:14:50 +02:00
febd1d5c88
remove misleading/incorrect comment
...
The previously-commented code is precisely what gets invoked
when solo state changes, and had nothing to do with actually
changing solo state in any way.
2017-02-24 10:18:57 +01:00
b5dbfc9931
leave a ToDo note for the mackie surface
2017-02-17 04:02:15 +01:00
1de584961a
NO-OP; Backport changes from Mixbus branch
2016-11-27 22:54:23 +01:00
44fcbd988c
mackie: ensure that the strip where select was pressed ends up as the first_selected_stripable
2016-07-06 21:40:29 -04:00
21bf61d559
MackieControl: in sends subview, if there are no sends for a vpot, drop the controllable for the vpot
2016-06-12 08:44:34 -04:00
a8d7b0fca3
redesign/reimplement selection knowledge in MackieControlProtocol object
...
strips listen to Stripable::presentation_info().PropertyChange, and forward selected status changes
to the MCP object
2016-06-12 08:19:16 -04:00
3eaa6c0389
remove certain ControlProtocol signals related to stripable selection
...
includes change to Mackie support so that strips listen for PropertyChange
on the stripables they represent, no global selection change used anymore.
2016-06-10 13:57:18 -04:00
f03f2e5c3f
use new record safe control in surface support
2016-05-31 15:30:45 -04:00
28afaebdc4
fix SNAFU in which Stripable::rec_enable_control() was incorrectly defined as ::recenable_control()
...
Make Mackie support code use the Stripable to access the rec-enable control while we're here
2016-05-31 15:30:45 -04:00
0d9433aef6
remove no-effect handling of route active-status change in Mackie Control code
2016-05-31 15:30:43 -04:00
186209c03c
fix crash in mackie code caused by assumption that all Stripables have meters
2016-05-31 15:30:43 -04:00
c34ad3a723
convert Mackie Control Surface support to use Stripable, not Route
2016-05-31 15:30:42 -04:00
e0ff70cf86
first vaguely working version using PresentationInfo
...
remote control ID and "order keys" have been removed.
2016-05-31 15:30:42 -04:00
5b5e64d860
remove Route::listening_via_monitor()
...
This is better tested with direct use of the solo_control and
Config->get_solo_controls_are_listen_controls()
2016-05-31 15:30:41 -04:00
653ae4acd6
universal change in the design of the way Route/Track controls are designed and used. The controls now own their own state, rather than proxy for state in their owners.
...
Massive changes all over the code to accomodate this. Many things are not finished. Consider this a backup safety commit
2016-05-31 15:30:40 -04:00
4b36593106
fix faderport and mackie to use route AutomationControls to be notified about solo/mute changes
2016-05-31 15:30:40 -04:00
aee283f056
use redesigned Route and VCA object architecture/API
2016-05-31 15:30:39 -04:00
672528baf4
fix shared_ptr<Route> management in Mackie support so that deleted routes are destroyed
2016-05-07 13:36:04 -04:00
10a11492dd
mackie: fix gain control display
2016-02-03 17:27:14 -05:00
eeff08aac4
mackie: use bus shortname in send subview.
...
Also slightly tighten route name display
2016-02-03 17:27:01 -05:00
7f82e7769f
zero more stuff out when leaving subview mode
2016-02-03 17:25:28 -05:00
dc4daa892d
Mackie Protocol: Show dB values for Mixbus "Send" levels.
...
No sense rewriting it now, but the correct way to approach
this stuff is to pass in the control, and use
the appropriate one of: interface, internal, or user values.
in this case, get_user would have returned dB for both Ardour and Mixbus sends.
2016-02-03 13:48:56 -06:00
8df1baa659
Fix for previous commit
2016-02-02 16:14:00 -06:00
ea08354c17
fix for knob scaling
2016-02-02 15:47:05 -06:00
a7775559c1
Mackie Control: remove Shift/select zeros fader.
2016-02-02 08:55:36 -08:00
9b1a150dd9
mackie: update fader+pot when changing flip status
2016-02-02 11:17:38 -05:00
a85b8ed842
mackie: fix display of input trim level trackview mode
2016-02-02 08:15:35 -05:00
4c13018656
mackie: fix display of send level/fader level in send subview
2016-02-02 08:08:14 -05:00
36b11098a2
mackie: substantial reworking of flip mode with large chunks of code no longer used.
...
Flip mode only works in Sends subview mode.
Display is incorrect when flipped - vpot is still updated by send level changes. TO BE FIXED.
2016-02-01 22:52:22 -05:00
cf29447ec3
mackie: add Phase control (for first channel only) in Track View subview mode.
...
Also removed a couple of methods no longer used, since trim and phase are only
visible in TrackView mode.
2016-02-01 15:15:57 -05:00
55967972b6
mackie: slightly less fragile/more readable code for compute new controllable values from vpot events
...
This is still not really right - it doesn't do the right thing, i think, for trim controls
2016-01-31 22:43:21 -05:00
c66d7e8cf9
mackie: consistent use of Shift to mean "InverseGroup"
2016-01-31 22:42:29 -05:00
de29ed02bc
mackie: display correct numerical send level
2016-01-31 22:41:46 -05:00
20d74585fd
mackie: implement trim, monitoring, solo iso and solo safe for trackview submode
2016-01-31 21:54:01 -05:00
9cfd76c026
mackie: make shift-click use InverseGroup semantics as intended, not NoGroup
2016-01-31 21:53:29 -05:00
23f457e81e
NOOP: comment fix
2016-01-31 21:52:46 -05:00
27b565d5cc
mackie: make vselect events and pot events handle toggle/enumeration controls correctly (or more correctly
2016-01-31 21:52:14 -05:00
