b60e9f7df9
Remove a call to 'fst_audio_master_idle()'
...
Nobody seems quite sure why it's needed but it seems to be crashing a lot of plugins:-
http://tracker.ardour.org/view.php?id=7668
2018-10-02 09:17:32 +01:00
87559a6054
Fix Mixbus master-bus tape-saturation controllable
2018-09-30 15:34:59 +02:00
cf652331ad
Adapt our remaining MSVC projects for 'boost::atomic' (in case it later gets extended to the other libs)
...
Stage 3 of 3
2018-09-30 09:19:28 +01:00
b519434744
Adapt our remaining MSVC projects for 'boost::atomic' (in case it later gets extended to the other libs)
...
Stage 2 of 3 (more to follow)
2018-09-30 09:06:25 +01:00
9506a294c7
Adapt our remaining MSVC projects for 'boost::atomic' (in case it later gets extended to the other libs)
...
Stage 1 of 3 (more to follow)
2018-09-30 08:56:12 +01:00
097176696b
Add support (in our MSVC projects) for using 'boost::atomic'
...
(only done "where necessary" for the moment - more to follow...)
2018-09-29 12:22:47 +01:00
d76589d90f
FP8/16: include makeup gain control
2018-09-28 16:19:40 +02:00
Albert Graef
65693a72a2
MCP: Fix up the feedback for the view selection buttons.
2018-09-27 11:31:13 -04:00
Albert Graef
38bccabeca
MCP: Allow the current bank to move right one channel even if this results in a partial bank.
...
Rationale: This change is trivial, but Ardour's behavior of refusing to move right one channel unless a full bank remains has been there for a long time, and there are probably good reasons for it. This design was likely conceived when all MCP-compatible devices had banks of 8 faders anyway. However, with the advent of affordable single-strip devices like the X-Touch ONE it becomes a real issue.
Single-strip devices can only access the first channel in the current bank, so relaxing this restriction is the easiest way to enable such devices to access all strips, while still maintaining the usual bank size of 8. Note that maintaining a bank size of 8 is beneficial even with single-strip devices for several reasons:
- It allows use of the bank switch buttons to flip through a large number of strips more quickly.
- It maintains compatibility with existing device descriptions. E.g., the X-Touch ONE can be used with the existing X-Touch device description without any ado.
- Most importantly, it maintains compatibility with other MCP-compatible controllers which do have 8 strips and may be connected to Ardour at the same time. E.g., one might want to use an X-Touch Mini, or even a full-size X-Touch along with the X-Touch ONE in some use cases. Changing the bank size to 1 affects all connected MCP devices, so you'd rather keep the bank size to 8 in such scenarios. (Ardour should preferably have separate bank size settings for each connected MCP device, but that isn't possible right now since only one MCP device description can be active at the same time.)
2018-09-27 11:31:13 -04:00
Albert Graef
936f6814ac
MCP: Fix up the feedback for the bank left/right buttons.
2018-09-27 11:31:13 -04:00
c4fcd0c268
consolidate all transport masters on a SafeTime object that is a member of the TransportMaster base class.
...
This seems to have broken some aspects of chasing/locking
2018-09-27 11:31:13 -04:00
147d456dbd
change type of MIDI::Parser::position signal to include timestamp
2018-09-27 11:31:13 -04:00
0f7123d33a
more objectification for SafeTime
2018-09-27 11:31:13 -04:00
b6aefaf100
initial hacks towards a truly thread-safe SafeTime object, using boost::atomic
2018-09-27 11:31:13 -04:00
3c11660d2a
VST-state, set/restore program before loading chunk.
...
This may fix some issues with VST state being restored incorrectly
when a plugin-preset was loaded.
2018-09-25 21:46:59 +02:00
99a8899c2d
Add Lua bindings to query DSP load statistics
2018-09-25 18:01:22 +02:00
6ca8ec5141
remove debug output
2018-09-23 13:48:19 -04:00
12d5eb9a34
remove debug output
2018-09-23 13:48:19 -04:00
d48dd0ccd5
defer creating a visibility tracker for a window until the window is mapped
...
Without this, the visibility tracker will report that the window is not visible at startup, and
this overrides the XML _visible property which denotes that the window should be made visible
2018-09-23 13:48:19 -04:00
b9d8f75119
emit property change for "collect" on a TransportMaster
2018-09-23 13:48:19 -04:00
fd23f89b35
Accommodate newly added/renamed source(s) in our MSVC project (libardour)
2018-09-22 16:55:43 +01:00
Jan Lentfer
e52c8e376a
LCXL: fix off by one cause by fader8master
2018-09-22 15:12:26 +02:00
Jan Lentfer
7d6c9c3085
LCXL: Fix a crash on exit
2018-09-22 15:12:26 +02:00
3b151c8cfb
no more slave.h
2018-09-22 09:03:50 -04:00
c83d5add7b
use abs() instead of fabs() on integers
2018-09-22 08:51:58 -04:00
f39bcaa4bf
Revert "MSVC complains because we're using 'fabs()' to compare 2 x integers"
...
You can't remove an abs() conversion and keep the same semantics.
This reverts commit d89b8cc0ad
2018-09-22 08:50:16 -04:00
62f29d6c44
remove old slave files
2018-09-22 08:49:24 -04:00
736b6a3e57
Replace a namespace brace deleted by accident
2018-09-22 09:08:44 +01:00
a3a156520d
Remove some namespace ambiguity
...
There are a couple of places where we're using both MIDI namespace as well as ARDOUR namespace (both of which declare 'pframes_t)
2018-09-22 08:48:41 +01:00
0354dbdfe9
Remove 2 x unneeded functions in 'SlaveSessionProxy'
...
I assume they're not needed now because their declarations got removed in commit #e6915e01de
2018-09-22 08:44:42 +01:00
d89b8cc0ad
MSVC complains because we're using 'fabs()' to compare 2 x integers
2018-09-22 08:39:34 +01:00
6dd6f6bb16
Fix typo: emit signal (don't construct an object)
2018-09-21 21:35:28 +02:00
357361c89d
Fix --no-nls (4/5), i18n include order in libs/*
...
"i18n.h" needs to be included last (after any includes that may indirectly
pull in getext or libintl etc)
2018-09-21 19:05:39 +02:00
497a3fbaa1
Fix --no-nls (2/5), prefer #if in libs
...
This is for consistency with system-wide gettext.h which is used
by some 3rd party libs. system-wide gettext uses `#if ENABLE_NLS`,
not #ifdef
2018-09-21 19:03:33 +02:00
03e5b97921
missing enum/properties stuff
2018-09-20 12:00:16 -04:00
9cdbeaa07d
switch transport masters to use properties and notify via PropertyChanged
2018-09-20 11:30:28 -04:00
84930c0cf1
namespace change to help out on non-linux platforms
2018-09-18 21:35:33 -04:00
a183b3bff4
do not initialize boost::shared_ptr<> with zero
2018-09-18 21:26:43 -04:00
87c11bcc2e
boost/atomic.hpp is not used
2018-09-18 20:01:05 -04:00
e6915e01de
new transport slave/master implementation, libs/ edition
2018-09-18 19:06:04 -04:00
7390b88c2b
OSC: Allow personal monitor to change output connection
2018-09-18 15:39:14 -07:00
9321f46c45
Implement new Enclosed region equivalence mode
2018-09-13 14:05:47 -04:00
f9f0b4aabd
LTC-file reader: offset frame position (not timecode)
2018-09-11 16:02:42 +02:00
d7dc224da5
Fix LTC file-reader -- closes #7661
...
Change reader API to return the position of the decoded LTC frame
and store the correct position in the array)
This bug was introduced in e5a181c323
2018-09-11 16:02:42 +02:00
a96aa4e1fd
OSC: Personal monitoring can add a new aux
2018-09-10 09:58:15 -07:00
79f01bc889
Initial changes needed for building Mixbus (with MSVC) as version 5
...
(Mixbus itself will probably need extra changes)
2018-09-10 07:14:59 +01:00
2172337306
Add missing cast (NoteButton to TrackButton)
2018-09-06 23:03:55 +02:00
e1c58aad60
Fix an invalid conversion from 'int' to non-scalar.
2018-09-06 19:28:45 +02:00
Jan Lentfer
eff7a51de1
LCXL: Refactor code to use boost::shared_ptr
2018-09-04 18:55:49 +02:00
ed678aa2f9
Fix shared_ptr initialization
...
error: no matching function for call to
'boost::shared_ptr<ArdourSurface::Push2::Button>::shared_ptr(int)'
2018-09-03 13:38:37 +02:00
