ardour/livetrax
13
0
Fork 0
Code
19,048 Commits 1 Branch 1 Tag 194 MiB
aac6a59071
Commit Graph

59 Commits

Author SHA1 Message Date
Paul Davis
36b11098a2 mackie: substantial reworking of flip mode with large chunks of code no longer used. 
Flip mode only works in Sends subview mode.

Display is incorrect when flipped - vpot is still updated by send level changes. TO BE FIXED.
 2016-02-01 22:52:22 -05:00
Paul Davis
0a2377e9b4 mackie: redesign display logic entirely 
Strips now maintain a pair of pending display strings (upper and lower).
A periodic timeout writes the pending value to the actual hardware if it
differs from the current string. This new design makes it easy to put a
message on the display and then after some period of time, revert to
whatever was there before.
 2016-01-29 12:27:46 -05:00
Paul Davis
ea895efb97 mackie: improvements to display when switching subview modes 2016-01-28 15:08:26 -05:00
Paul Davis
81179389d3 mackie: cleanup subview mode a little 2015-12-16 05:55:10 -05:00
Paul Davis
8ba8f1c0b0 fix cherry-pick conflict 2015-12-16 05:54:43 -05:00
Paul Davis
8bdab38d43 track add/remove of monitor and/or master busses in mackie support code. 
Somehow fails to move master fader to correct position when monitor section is added
 2015-12-13 08:33:09 -05:00
Paul Davis
965b135842 numerous changes to Mackie support, generally offering better robustness 2015-10-10 17:14:30 -04:00
Paul Davis
9b5a071c33 varied and wide changes to get input and output combos closer to working 2015-10-09 14:01:22 -04:00
Paul Davis
bda0ba173c for an ipMIDI surface, make the GSource used for input hold the only reference on the GUIChannel. 2015-10-08 21:55:37 -04:00
Paul Davis
7e10c21468 make Mackie::Surface keep a reference to the input source+channel and clean up in destructor 2015-10-08 21:55:37 -04:00
Paul Davis
0cb1c7b58c lots of changes to try to get the Mackie Control display be more useful and usable 2015-10-08 12:51:44 -04:00
Paul Davis
4a1790b75e remove unused per-surface button timer 2015-10-08 12:50:05 -04:00
Len Ovens
6899bd7c15 Add Trim to Mackie controls. 2015-10-07 21:36:16 -07:00
Paul Davis
c9658134ce add button time and explicit bank switching to MCP support 2015-10-07 15:13:03 -04:00
Paul Davis
ce9b271a92 track Mackie MIDI port connection status as primary trigger for handshake with device 2015-10-07 13:17:49 -04:00
Robin Gareus
22b07e0233 NOOP, remove trailing tabs/whitespace. 2015-10-05 16:17:49 +02:00
Paul Davis
4dc63966f0 globally remove all trailing whitespace from ardour code base. 
Paul Davis was responsible for introducing almost all of this.
 2015-10-04 14:51:05 -04:00
Paul Davis
6bf0d4f627 add basic support for HUI heartbeat, only used for HUI devices 2015-10-03 13:13:58 -04:00
Paul Davis
3733fd7f31 remove undefined and unused method declaration 2015-10-02 22:08:15 -04:00
Paul Davis
4d47760d61 add new (fast) redisplay timer that pushes parameter display text to MCP device. 
Changes are queued in a FIFO, and pulled when a timeout in the MCP event loop fires.
 2015-10-02 22:08:14 -04:00
Paul Davis
ccf505c3a2 implement backlight, fader touch sensitivity and recalibrate fader functions for MCP GUI 2015-10-02 22:08:14 -04:00
Paul Davis
4512d013eb put all of the Mackie control surface code into the ArdourSurface namespace 2015-04-15 20:37:20 -04:00
Paul Davis
85cd647226 Mackie Control support now saves & restores port connections for devices not using ipMIDI (not required for ipMIDI anyway) 2013-12-13 16:04:34 -05:00
Paul Davis
a17bafa964 remove some unused code from mackie support 2013-12-13 16:04:34 -05:00
Paul Davis
8f091de64b for MCP devices that don't handshake, turn them on as soon as we call ::connectivity_established() so that _active == true, and we will actually write to them 
git-svn-id: svn://localhost/ardour2/branches/3.0@14165 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2013-03-06 20:15:28 +00:00
Paul Davis
71427323ec MCP: latest patch from Rodrigo: 
* fixes Master Fader Touch button in the Mackie;
    * implements a MasterFaderTouch global button;
    * removes unused MackieControlProtocol::_transport_previously_rolling property;
    * implements DeviceInfo::get_global_button() method;
    * creates GlobalButtonsInfo and StripButtonsInfo types in DeviceInfo;
    * implements Surface::_last_master_gain_written property to help master fader feedback;
    * makes Surface respect _mcp.device_info().strip_cnt() to create master fader and when connecting signals for strips and master fader instead of using hardcoded 8;
    * removed a few unnecessary updates in Surface::turn_it_on();
    * included master_gain_changed() in Surface::periodic();
    * implemented MackieControlProtocol::master_fader_touch_press and
    * MackieControlProtocol::master_fader_touch_release;



git-svn-id: svn://localhost/ardour2/branches/3.0@12631 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-06-09 19:06:52 +00:00
Paul Davis
ba5e71b50f MCP: Patch from Rodrigo that: 
* implements Metering on/off through Button::Read as per Seablade's suggestion. I choose this button as it's the "Show meters" button in Traktion;
    * removes redundant code from Meter::update_transport_rolling();
    * renames Meter::update_transport_rolling() to Meter::notify_metering_state_changed();
    * renamed Surface::notify_transport_state_changed() to Surface::notify_metering_state_changed();
    * renamed Strip::notify_transport_state_changed() to Strip::notify_metering_state_changed();
    * created MackieControlProtocol::notify_metering_state_changed() and made MackieControlProtocol::notify_transport_state_changed() use it;
    * implemented turning off of timecode display and two char display in Surface::zero_all ();
    * implemented master fader zeroing in Surface::zero_all ();
    * calling Surfaces->zero_all() at MackieControlProtocol destructor;
    * implemented restore of 2nd LCD line content after metering being active.



git-svn-id: svn://localhost/ardour2/branches/3.0@12520 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-06-01 12:56:20 +00:00
Paul Davis
28e3bc3ac7 MCP: metering changes from rodrigo, makes metering work correctly on the MC Pro (also checked on the nucleus) 
git-svn-id: svn://localhost/ardour2/branches/3.0@12489 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-05-30 14:32:27 +00:00
Paul Davis
1d5bade8a1 patch from rodrigo severo to make mackie timecode display work 
git-svn-id: svn://localhost/ardour2/branches/3.0@12480 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-05-29 20:18:43 +00:00
Paul Davis
4d780bdcd0 provide some support for mackie devices like Steinberg's CMCs that do not do the normal Mackie spec handshaking 
git-svn-id: svn://localhost/ardour2/branches/3.0@12252 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-05-11 16:04:09 +00:00
Paul Davis
edad92a944 control surfaces: make it possible to keep display of current GUI/selection state as we bank through tracks/bussses. note careful use of weak_ptr<Route> to avoid messing with Route lifetimes. this scheme may change 
git-svn-id: svn://localhost/ardour2/branches/3.0@12115 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-28 01:43:38 +00:00
Paul Davis
3b7e2f7d67 MCP: properly (?) handle bank/channel scrolling with locked strips 
git-svn-id: svn://localhost/ardour2/branches/3.0@12095 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-26 14:28:41 +00:00
Paul Davis
ac1b2a6647 MCP: another bevy of changes, including working jog wheel 
git-svn-id: svn://localhost/ardour2/branches/3.0@12056 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-22 17:37:52 +00:00
Paul Davis
82c867bf2a MCP: a fistful of improvements. probably best to just try it and see what it broken. KNOWN: pressing vpots without a bank/channel shift will crash ardour 
git-svn-id: svn://localhost/ardour2/branches/3.0@12053 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-22 02:15:24 +00:00
Paul Davis
24377e9fb2 MCP: the return of the master fader 
git-svn-id: svn://localhost/ardour2/branches/3.0@11973 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-14 20:38:42 +00:00
Paul Davis
2ed2b61224 MCP: redesign to allow device-specific button IDs, since we know that at least one device (nucleus) does not honor mackie's specification document 
git-svn-id: svn://localhost/ardour2/branches/3.0@11972 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-14 19:02:54 +00:00
Paul Davis
8f7fa7d93b MCP: timeout display of value when altering with fader or pot; range ops on strip buttons should work; select logic may be broken 
git-svn-id: svn://localhost/ardour2/branches/3.0@11959 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-13 16:11:55 +00:00
Paul Davis
17b442971b MCP: more surface properties, correctly close IOSources when switching surfaces; write select button msgs one by one, change port name back to generic terms 
git-svn-id: svn://localhost/ardour2/branches/3.0@11945 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-12 17:52:57 +00:00
Paul Davis
0c4fe26b41 MCP: switch devices on the fly; name MIDI ports appropriately; fix active state; move sysex parsing into Surface 
git-svn-id: svn://localhost/ardour2/branches/3.0@11942 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-12 16:41:07 +00:00
Paul Davis
62620122a9 propagate GUI track selection to control protocols; make MCP update when GUI track selection changes 
git-svn-id: svn://localhost/ardour2/branches/3.0@11941 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-12 14:34:03 +00:00
Paul Davis
5b34da2f96 MCP: check on whether we using pan width control; flip mode may change display 
git-svn-id: svn://localhost/ardour2/branches/3.0@11931 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-12 00:52:02 +00:00
Paul Davis
1ce39cfb25 MCP: more view mode stuff 
git-svn-id: svn://localhost/ardour2/branches/3.0@11913 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-11 19:27:13 +00:00
Paul Davis
5097af6a13 MCP: start adding different view modes and support for Flip 
git-svn-id: svn://localhost/ardour2/branches/3.0@11911 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-11 18:51:01 +00:00
Paul Davis
8c9f9e746b MCP: further objectification of event handling code 
git-svn-id: svn://localhost/ardour2/branches/3.0@11896 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-11 13:39:25 +00:00
Paul Davis
02c8ccf348 move all code to construct MIDI messages into relevant Control/Strip/Surface object; remove MackieMidiBuilder 
git-svn-id: svn://localhost/ardour2/branches/3.0@11895 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-11 13:03:41 +00:00
Paul Davis
43a6662357 MCP: actually map routes to strips, more debug tracing 
git-svn-id: svn://localhost/ardour2/branches/3.0@11865 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-10 15:13:37 +00:00
Paul Davis
5ace191bff drastic, fundamental redesign of MCP code 
git-svn-id: svn://localhost/ardour2/branches/3.0@11861 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-10 14:27:44 +00:00
Paul Davis
2b659deaef remove redundant MackieButtonHandler class, implement initial zoom support for cursor left + right buttons 
git-svn-id: svn://localhost/ardour2/branches/3.0@11847 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-09 15:32:25 +00:00
Paul Davis
f02edae438 start breaking apart the various controls into their own headers and source code, and making each control know how to generate MIDI; throttle delivery of meter data and get meter ID right 
git-svn-id: svn://localhost/ardour2/branches/3.0@11846 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-09 13:59:35 +00:00
Paul Davis
0e0c4277cf MCP: start up event loop (thread) so that we can do timeouts and metering; start of Meter control support 
git-svn-id: svn://localhost/ardour2/branches/3.0@11840 d708f5d6-7413-0410-9779-e7cbd77b26cf
 2012-04-08 23:14:36 +00:00