6ac76734f5
cut buffer must not mess around with libardour selection
...
Fixes range mode selection/cut/copy that would previously clear track selection
2017-06-07 12:28:53 -04:00
ca815acd61
a-EQ: DSP bugfix
...
Previously there were large spurious spikes in the signal when
the bandwidth parameter was adjusted on a pure sine tone
for the peaking circuits. This has been *greatly* reduced if not
eliminated by fixing a typo in two of the equations.
2017-06-08 02:04:12 +10:00
c4a4857b87
OSC: add optional paging to sends in select.
2017-06-06 09:08:35 -07:00
Nil Geisweiller
a07ca8fa3e
Fix a-EQ when parameter changes are very slow
...
If the parameters change too slowly the filter may never get updated. Indeed,
in spite of v_f0, v_g or v_bw being updated, set_params may never be called,
thus v_filter never updated.
2017-06-06 14:44:19 +02:00
Daniel Sheeler
2c41df9474
add route dialog now has "Add" and "Add and Close" buttons. "Add" keeps dialog open so user can add multiple templates.
2017-06-03 21:44:48 -05:00
11ba1854b3
Apply VCA master gain automation to Amp (Fader, Trim)
2017-06-03 13:55:16 +02:00
9581cb26e4
Add infrastructure for evaluating VCA automation curves
2017-06-03 13:55:14 +02:00
d662e6e0bf
amend 67f9f6fd: no recursive ReaderLock
2017-06-03 13:55:08 +02:00
c2cb60ea03
add const-ness: Evaluating a curve does not change it.
...
Note that the ControlList's lock and cache are already mutable.
2017-06-03 13:55:02 +02:00
0c57199a6c
Add a scratch buffer for automation.
...
Useful as temporary buffer: This allows a controllable to
get a master's automation-curve and combine it with its own
(gain, trim, send) automation buffer.
2017-06-03 13:54:55 +02:00
5f7d50a690
NO-OP: whitespace
2017-06-03 00:19:35 +02:00
cc971b6d9b
Import Dialog is Window. Dialog Esc behavior needs to be emulated.
2017-06-02 18:21:31 +02:00
4b0e2ad682
Remove "Close" button from import-dialog (prefer WM close button)
2017-06-01 11:57:08 +02:00
82cb046fa3
if actively recording, prevent interaction between mouse and audio clock widget(s)
2017-05-31 13:04:26 -04:00
d35dfa9c93
OSC: Some surfaces may use float for ssid. Accept this too.
2017-05-31 08:39:55 -07:00
b343108756
OSC: check controllable exists before using
2017-05-31 08:39:55 -07:00
46a2bfa0e6
Add Lua bindings for VCAs and VCAManager
2017-05-30 15:15:30 +02:00
67f9f6fd75
Prepare for automation control master
...
Basic infrastructure to allow VCA automation and Trim automation:
look up events during automation playback.
2017-05-30 15:13:37 +02:00
da021ef08f
Credit where credit is due
2017-05-29 23:48:17 +02:00
628e60f8fd
NO-OP: whitespace
2017-05-29 23:45:16 +02:00
Daniel Sheeler
d67436af3b
duplicate routes start off unsoloed to avoid issues related to upstream / downstream buses
2017-05-29 15:42:27 -05:00
b21c4b41a3
when creating a new session after working on one, the "Cancel" button should be a quit button.
...
This avoids ending up with a null Session pointer in the GUI (#7369 )
2017-05-29 15:35:03 -04:00
0a13106765
Allow export presets for 176.4KHz -- "Ardour6: music for bats"
2017-05-29 13:37:06 +02:00
54efcbaa35
Update Russian translation
2017-05-26 12:45:08 +02:00
1ef690da19
Use string concatenation and PBD::to_string in EventTypeMap::to_symbol()
...
Avoid using PBD::string_compose for serialization as correct behaviour depends
on the setting of the global C++ locale.
2017-05-26 10:50:08 +10:00
1f094027c5
Remove normalization of property names from libpbd xml code
...
It may have been OK to add this code temporarily at this low level, but as it
was introduced in 2008, this change is made with the assumption that any
Sessions that were affected have been re-saved since then with corrected
property names and that "normalization" is no longer necessary.
Timing results before changes:
XMLTest::testPerfMediumXMLDocumentTiming
Create : Count: 10 Min: 30375 Max: 48253 Total: 431727 Avg: 43172 (43 msecs)
Write : Count: 10 Min: 42553 Max: 49163 Total: 453353 Avg: 45335 (45 msecs)
Read : Count: 10 Min: 70307 Max: 75987 Total: 734923 Avg: 73492 (73 msecs)
XMLTest::testPerfLargeXMLDocumentTiming
Create : Count: 10 Min: 154486 Max: 307856 Total: 2678989 Avg: 267898 (267 msecs)
Write : Count: 10 Min: 304273 Max: 343274 Total: 3169158 Avg: 316915 (316 msecs)
Read : Count: 10 Min: 496920 Max: 541394 Total: 5260410 Avg: 526041 (526 msecs)
Timing results after changes:
XMLTest::testPerfMediumXMLDocumentTiming
Create : Count: 10 Min: 21437 Max: 39749 Total: 348622 Avg: 34862 (34 msecs)
Write : Count: 10 Min: 42320 Max: 49989 Total: 446135 Avg: 44613 (44 msecs)
Read : Count: 10 Min: 63252 Max: 68389 Total: 660841 Avg: 66084 (66 msecs)
XMLTest::testPerfLargeXMLDocumentTiming
Create : Count: 10 Min: 113458 Max: 263225 Total: 2215595 Avg: 221559 (221 msecs)
Write : Count: 10 Min: 305439 Max: 339986 Total: 3150697 Avg: 315069 (315 msecs)
Read : Count: 10 Min: 447560 Max: 488121 Total: 4698903 Avg: 469890 (469 msecs)
2017-05-26 08:48:04 +10:00
640d9d355f
Use correct property name in generic MIDI surface
...
Fixes restoring the feedback interval property, but as the mutator/setter
method doesn't seem to be used this change should have no affect.
2017-05-26 08:48:04 +10:00
bbb9a82e17
Use correct names when setting MidiTrack properties
...
These were changed in the XMLProperty ctor and they now match the names used in
MidiTrack::set_state()
2017-05-26 08:48:04 +10:00
af8d027fc5
Remove attempt to retrieve invalid Meterbridge properties
...
The property names with underscores are "normalized" to replace the underscores
with hyphens in the XMLProperty constructor from within Meterbridge::get_state
and so have always been written with hyphens.
2017-05-26 08:48:04 +10:00
3747d1688c
Use correct property names in Meterbridge::get_state()
...
These property names have been "normalized"/changed to use a hyphen in the
XMLProperty ctor since 2008. That is before the Meterbridge existed so there
should be no files existing that contain these properties with underscores.
2017-05-26 08:48:04 +10:00
c72e3f16a1
Use correct property names for Editor transport controllable state
...
These are normalized in the PBD::XMLProperty ctor, which is why
Editor::get_transport_controllable_state() uses the hyphenated names to
retrieve the properties and will not result in any state format change.
2017-05-26 08:48:04 +10:00
244313f43f
Always create a deep copy of MIDI regions when copying playlists.
2017-05-25 14:10:14 +02:00
a48f0cfd63
Pretty print control-outputs in generic-UI
2017-05-25 13:49:18 +02:00
ae4b6316f1
Implement basic AU parameter-printing
...
(don't leave buf uninitialized)
2017-05-25 13:49:18 +02:00
63a71c597a
Include ParameterDescriptor in read-only control output
2017-05-25 13:49:18 +02:00
2c40b46ca9
OSC: fix return value for successful touch
2017-05-24 13:58:49 -07:00
1e95ccf07d
OSC: Added lpf and hpf controls for freq,enable and slope
2017-05-24 07:37:21 -07:00
f493b24e3e
OSC add feedback for extra comp and eq controls
2017-05-23 17:16:42 -07:00
2f1ad4d9a2
OSC - make /strip/list accept a parameter like everything else
2017-05-23 15:14:31 -07:00
6701f666ca
Accommodate recently removed source(s) in our MSVC project (gtk2_ardour)
2017-05-23 09:28:44 +01:00
f9b256044f
Remove old jack_utils.h header that was moved to the JACK backend
...
Also remove a related test that has not been part of the unit tests since the
move (years).
2017-05-23 14:32:15 +10:00
nick_m
39e7e11b5e
Sort tempo map after legacy sections have been assigned a pulse
2017-05-23 11:41:36 +10:00
nick_m
b886c1dcfa
Tempo sections with a BBT start XML node are never ramped
2017-05-23 09:54:30 +10:00
7c6a62452d
Remove unused header file in gtk2_ardour
2017-05-23 09:23:34 +10:00
29447f48eb
Remove dead assignment in Editor::export_audio()
2017-05-23 09:13:27 +10:00
4d927c6bd4
Use braces in BasicUI::jump_by_bars()
2017-05-23 09:13:27 +10:00
7fe188ec92
Use braces in BasicUI::jump_by_seconds()
2017-05-23 09:13:27 +10:00
df185e575e
Use correct variable in BasicUI::jump_by_seconds
2017-05-23 09:13:27 +10:00
42441d322d
Remove dead assignment in Editor::metric_get_bbt
2017-05-23 09:13:27 +10:00
3b8afbcd00
Remove dead assignment in MiniTimeline::draw_edge
2017-05-23 09:13:27 +10:00
