5c11e43f08
Clam points to valid values on drag end.
...
Fixes bug #6214 .
It would be better to do this while dragging, but this would require rewriting
much of the drag code to keep track of a cumulative y delta since the current
position of points would be "sticky" and prevent any movement at all, so this
will have to do for now.
2015-03-26 13:22:57 -04:00
b3ea22fc3f
Remove unused method.
2014-12-01 23:35:24 -05:00
ed1bbefd19
Somewhat working gain automation.
...
This probably isn't correct in several ways, but it works more than it did, so
I figure it's push worthy.
Still not working:
* Saving mute automation list
* Dragged control points are not snapped to model restrictions
(boolean, in this case, but general problem)
* Line goes funny if you record mute automation
(as opposed to drawing it which works)
2014-11-29 01:25:27 -05:00
f190e630ab
Show discrete/toggled automation as stepped line.
2014-11-28 21:15:28 -05:00
47c4929bc2
Display gain and midiNote plugin parameters/properties nicely.
...
Show fancy values on generic GUI controls, automation lane controls, and automation lane verbose cursor.
Fix text display of midiNote values.
Make bigstep of midiNote parameters 12 (one octave).
Add ARDOUR::value_as_string() as a stateless one-stop-shop for value printing.
2014-11-02 02:10:24 -05:00
8a128b33d3
Automation of LV2 plugin properties.
...
Work towards ParameterDescriptor being used more universally to describe control characteristics.
2014-11-02 02:10:24 -05:00
6a5d805b38
more canvas refactoring.
...
Remove Canvas::Layout, use Canvas::Container for the same purpose, move child-rendering into Item::render_children() so that it
could theoretically be used by any derived type.
2014-06-22 11:41:05 -04:00
0796ccfb65
use newly factored canvas in gtk2_ardour
2014-06-21 11:44:22 -04:00
94fa927861
limit automation event density - fixes #5928
...
Constrain control points to one per tick (1/1920 beats).
Prior to this it was possible to set two values to the
same time (interpolation and iteration failed).
2014-06-07 17:43:12 +02:00
983bf548cd
alter name of AutomationLine::show() to much more sensibly named ::update_visibility()
2014-03-05 12:11:22 -05:00
59631acc5f
fix merge with master
2014-01-11 15:19:18 -05:00
72d8ca89e2
Support midnam controller value labels.
2014-01-10 20:51:54 -05:00
0fe968a140
Fix whitespace (no functional changes).
2014-01-10 20:51:54 -05:00
2d389a23d5
convert automation line from Canvas::Curve to Canvas::PolyLine (note: this means there is no actual use of Canvas::Curve now)
2013-12-28 13:52:46 -05:00
7caf517b27
add (bezier) curves to canvas, use for automation lines; fix issue with rectangles missing their upper line segment; more cairo canvas fixes
2013-04-11 22:54:12 -04:00
aaea166135
initial commit of hand merging, plus getting "ancient" waf script to work correctly
2013-04-04 00:32:52 -04:00
30237aad7f
fix push-drags of automation data - previously we did not resync the model with the view for the points that were pushed (i.e. not selected, but moved anyway)
...
git-svn-id: svn://localhost/ardour2/branches/3.0@13681 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-12-19 15:55:06 +00:00
1bff57131a
substantive change to automation line dragging code to avoid O(N^4) behaviour. performance fixes are still required for realistically data-rich automation lines
...
git-svn-id: svn://localhost/ardour2/branches/3.0@13515 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-11-17 22:55:03 +00:00
0532e2063b
dramatic overhaul of automation. too long to explain here. this work is not finished - write/touch passes do not correctly overwrite existing data because the semantics of ControlList::insert_iterator need clarification. more to follow
...
git-svn-id: svn://localhost/ardour2/branches/3.0@13038 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-07-13 21:05:45 +00:00
e89bdcd9eb
provide some numerical data during automation trim (range) drags, and correct computation of y-fraction for such drags
...
git-svn-id: svn://localhost/ardour2/branches/3.0@13011 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-07-10 15:44:56 +00:00
7aa66b6623
remove extra unused argument to ::sync_model_with_view_point(s)
...
git-svn-id: svn://localhost/ardour2/branches/3.0@13005 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-07-09 22:03:32 +00:00
Carl Hetherington
556732df80
Fix incorrect automation point drags when a drag is started with push held and finished without it.
...
git-svn-id: svn://localhost/ardour2/branches/3.0@12509 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-05-31 17:08:39 +00:00
f1505b631d
substantive change to try to provide some rationality for region gain line visibility (and automation line visibility in general
...
git-svn-id: svn://localhost/ardour2/branches/3.0@12478 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-05-29 18:30:10 +00:00
Carl Hetherington
7070b8f753
Fix some confusion wrt did_push as a member and a local variable; pass push distances through the AutomationList's time converter so that they work properly; a few comment fixes.
...
git-svn-id: svn://localhost/ardour2/branches/3.0@12060 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-23 00:35:49 +00:00
Carl Hetherington
a4434809e1
Use a list of ControlPoints to hold the automation selection,
...
rather than a time range. This makes more sense now that we
display every point on an automation line, rather than just
a subset. Makes the code a fair bit simpler, and should fix
some unexpected behaviours, especially when cutting automation
points.
git-svn-id: svn://localhost/ardour2/branches/3.0@12054 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-22 14:03:07 +00:00
Carl Hetherington
ca96b9afe8
Remove some unused code.
...
git-svn-id: svn://localhost/ardour2/branches/3.0@12052 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-21 23:54:20 +00:00
49240fe7c5
Draw all automation points, rather than trying to use a heuristic to show some
...
at any given zoom level.
This works because (1) automation data is obtained by sampling, and we control
the sampling interval (2) automation data is filtered to remove co-linear
points before becoming part of a ControlList.
This commit removes some of the hairiest code in Ardour's GUI, which was
responsible for figuring out which invisible control points were affected by an
edit. The change is based on an experiment in mixbus done by Ben Loftis.
git-svn-id: svn://localhost/ardour2/branches/3.0@11798 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-04-05 16:53:55 +00:00
Carl Hetherington
3120bae8b4
Don't leave internal edit mode when clicking on an automation region view ( #4747 ).
...
git-svn-id: svn://localhost/ardour2/branches/3.0@11749 d708f5d6-7413-0410-9779-e7cbd77b26cf
2012-03-22 16:41:23 +00:00
Carl Hetherington
de53e1154b
Fix problems with selecting control points in AutomationRegionViews with non-zero region start. Firstly, determine_visible_control_points considers a subset of the AutomationLine's points if start is non-zero, and this must be taken into account when matching up AutomationLine points with AutomationList points. Secondly, _offset should not part of the calculation when converting model position to session frames. Fixes #4338 .
...
git-svn-id: svn://localhost/ardour2/branches/3.0@10151 d708f5d6-7413-0410-9779-e7cbd77b26cf
2011-09-28 00:36:30 +00:00
Carl Hetherington
5f9fb85b77
Fix crash when selecting automation points in MIDI
...
regions with non-zero starts (#4177 ) and also fix
problems with selection conversions between
ControlPoints and PointSelection in similar regions.
git-svn-id: svn://localhost/ardour2/branches/3.0@9866 d708f5d6-7413-0410-9779-e7cbd77b26cf
2011-07-13 19:24:46 +00:00
ed626628b5
Delete trailing whitespace
...
git-svn-id: svn://localhost/ardour2/branches/3.0@9656 d708f5d6-7413-0410-9779-e7cbd77b26cf
2011-06-01 17:00:29 +00:00
Carl Hetherington
a97d522a4f
Fix display of MIDI automation on regions with non-zero _start. Should fix #3504 .
...
git-svn-id: svn://localhost/ardour2/branches/3.0@8257 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-12-12 22:25:27 +00:00
Carl Hetherington
6fff4dcdda
Small cleanups.
...
git-svn-id: svn://localhost/ardour2/branches/3.0@8255 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-12-12 20:14:19 +00:00
ede4ecbb00
megaopus patch #2 for today: remove nframes64_t and sframes_t from source
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7792 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-09-17 18:20:37 +00:00
Carl Hetherington
86244875a4
Allow drags of automation in time ranges where the automation is on a MIDI track and may span different regions. Fixes #3366 .
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7765 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-09-09 21:35:28 +00:00
6e904b1e16
3.0 version of rev 5564 from 2.x - basic boolean plugin parameter automation (no graphical editing intended). this involved adding a new "toggled" property to Evoral::Parameter
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7670 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-08-23 16:31:34 +00:00
Carl Hetherington
822ee79d84
Limit region-based automation to the edges of regions. Fixes #3201 .
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7662 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-08-20 22:43:10 +00:00
Carl Hetherington
efe60474d6
Hopefully fix up automation control point selection (finally).
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7592 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-08-11 01:23:03 +00:00
Carl Hetherington
c06c6c153d
Fix up selection of automation points.
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7556 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-08-06 23:28:44 +00:00
Carl Hetherington
b99721ec3b
Remove somewhat confusing view_to_model_coord_x method.
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7546 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-08-05 13:37:04 +00:00
Carl Hetherington
5e3ca4db5c
Support cut / copy / paste of MIDI automation.
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7545 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-08-05 13:36:38 +00:00
Carl Hetherington
cc6016400b
Allow rubberband selection of MIDI automation points. Fixes
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7535 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-08-04 15:41:55 +00:00
Carl Hetherington
97c8ad6564
Make Clear option work for MIDI automation tracks. Fixes part of #3137 .
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7523 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-07-31 00:44:26 +00:00
Carl Hetherington
2aaec8beeb
Fix list corruption when modifying a view point in y only. Should fix #3329 .
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7450 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-07-20 16:53:30 +00:00
Carl Hetherington
66062a85b6
Fix binding of automation list undo records to MIDI sources. Should fix the remainder of #3203 .
...
git-svn-id: svn://localhost/ardour2/branches/3.0@7411 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-07-14 12:27:37 +00:00
Carl Hetherington
593b421180
A few fixes to interpolation of MIDI controller data. Don't interpolate
...
when writing these data back to a source, otherwise surprising new
interpolated points appear in MIDI automation. Similarly don't interpolate
when reading the model during MIDI stretch. Fix handling of interpolation state;
controllers that have been set by the user to use a different interpolation style
are noted in the <Source> tag of the session file and this state is sprayed around
to MidiModel and the GUI as necessary.
git-svn-id: svn://localhost/ardour2/branches/3.0@7409 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-07-14 00:58:15 +00:00
Carl Hetherington
37dd777c9a
Fix confusion about last_pointer_* variables under snap.
...
Update verbose canvas cursor correctly when automation point drags are clamped.
Clamp multi-point automation drags horizontally.
git-svn-id: svn://localhost/ardour2/branches/3.0@6474 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-01-11 19:36:29 +00:00
Carl Hetherington
c115b3d71c
Update verbose cursor correctly when y drags are clamped.
...
git-svn-id: svn://localhost/ardour2/branches/3.0@6469 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-01-08 19:55:37 +00:00
Carl Hetherington
5f8f481172
Fixes to permit drags of multiply-selected automation control points.
...
git-svn-id: svn://localhost/ardour2/branches/3.0@6450 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-01-05 02:22:58 +00:00
Carl Hetherington
0f79f67398
Some cleanups to drawing of automation line control points. Drag all selected automation points if one selected point is dragged.
...
git-svn-id: svn://localhost/ardour2/branches/3.0@6437 d708f5d6-7413-0410-9779-e7cbd77b26cf
2010-01-03 00:08:58 +00:00
