13
0
Commit Graph

52 Commits

Author SHA1 Message Date
d6b14e761b
Remove unused backend channel count config API 2024-07-10 15:39:01 +02:00
dacf488c86
Fix callback order of port-dis/connections
Previously the port-engine was a LIFO. Changes were pushed back
and then popped-back. This causes issues when re-connecting
Transport Masters.

The GUI does the following when changing connections:
1. disconnect all
2. connect to new port

which lead to TransportMaster::connection_handler being called
in reverse order: connect, disconnect, and the transport
master was assumed to not be connected.

--

Now connections queue is a FIFO and code was consolidated.

(Note, we cannot use a std::deque because it does not support
memory pre-allocation with ::reserve)
2023-12-02 23:34:58 +01:00
Mads Kiilerich
88cecdfaef wscript: drop repeated autowaf.set_options - it is enough to set at top level 2023-10-15 10:47:16 -06:00
Mads Kiilerich
d220f477ed wscript: drop unused "mandatory variables" 'top' and 'out' in libs
Variables by these names are only used from the local wscript and when
running "waf configure", which already for other reasons only can run at
the top-level.

These variables are thus not mandatory and not used.
2023-09-17 07:34:55 -06:00
Mads Kiilerich
7737c17d52 wscript: drop unused imports, scripted
Done with ad hoc scripting hacks processing unused imports found by pyflakes:

for f in $( find * -name wscript ); do echo; pyflakes $f; done | grep 'waflib.Logs.* but unused' | cut -d: -f1 | while read f; do sed -i 's/^import waflib.Logs as Logs,/import/g' $f; done
for f in $( find * -name wscript ); do echo; pyflakes $f; done | grep 'waflib.Options.* but unused' | cut -d: -f1 | while read f; do sed -i 's/import waflib.Options as Options, /import /g' $f; done
for f in $( find * -name wscript ); do echo; pyflakes $f; done | grep 'waflib.Options.* but unused' | cut -d: -f1 | while read f; do sed -i 's/^from waflib import Options,/from waflib import/g' $f; done
for f in $( find * -name wscript ); do echo; pyflakes $f; done | grep ' imported but unused$' | sed "s/^\([^:]*\):[0-9]*:[0-9]* '\(.*\)'.*/\1 \2/g" | while read f lib; do sed -i "/^import $lib$/d" $f; done
for f in $( find * -name wscript ); do echo; pyflakes $f; done | grep 'waflib.Options.* but unused' | cut -d: -f1 | while read f; do sed -i '/from waflib import Options$/d' $f; done
for f in $( find * -name wscript ); do echo; pyflakes $f; done | grep 'waflib.TaskGen.* but unused' | cut -d: -f1 | while read f; do sed -i '/from waflib import TaskGen$/d' $f; done
for f in $( find * -name wscript ); do echo; pyflakes $f; done | grep 'waflib.Task.Task.* but unused' | cut -d: -f1 | while read f; do sed -i '/^from waflib.Task import Task$/d' $f; done
for f in $( find * -name wscript ); do echo; pyflakes $f; done | grep 'waflib.Tools.winres.* but unused' | cut -d: -f1 | while read f; do sed -i '/^from waflib.Tools import winres$/d' $f; done
for f in $( find * -name wscript ); do echo; pyflakes $f; done | grep 'waflib.Utils.* but unused' | cut -d: -f1 | while read f; do sed -i '/^import waflib.Utils as Utils$/d' $f; done
2023-09-17 07:34:55 -06:00
4ba4cd69ff switch from glib atomic to std::atomic (libs edition) 2023-03-24 14:19:15 -06:00
b35518e212 switch from boost::{shared,weak}_ptr to std::{shared,weak}_ptr
This is mostly a simple lexical search+replace but the absence of operator< for
std::weak_ptr<T> leads to some complications, particularly with Evoral::Sequence
and ExportPortChannel.
2023-03-24 14:19:15 -06:00
39ed528e25 std-ize: convert all boost shared/weak ptr includes to <memory>
Also fix stdint.h -> cstdint and alphabetically order std includes
2023-03-24 14:19:15 -06:00
Mads Kiilerich
4958c0d666
PulseAudio: fix error message 2022-11-04 13:44:55 +01:00
Mads Kiilerich
c2db9b4606
PulseAudio: just start stream uncorked
There was no reason to cork it when it was uncorked right after.

Playback will start when the buffer is full anyway.
2022-11-04 13:44:55 +01:00
Mads Kiilerich
00d3ce6b62
PulseAudio: remove commented out code 2022-11-04 13:44:55 +01:00
Mads Kiilerich
40f9e0c6a6
PulseAudio: use explicit defaults for tlength and prebuf
These might be the values that PA would have chosen anyway, but make it
clear that Ardour is in control ... and will let the user control
"everything" with the buffer size.
2022-11-04 13:44:55 +01:00
Mads Kiilerich
584ee51ca8
PulseAudio: set buffer attributes where they are used
Just moving code.
2022-11-04 13:44:55 +01:00
Mads Kiilerich
8e7ef0d42c
PulseAudio: use correct casing
This will also change the internal backend name, so it will miss the
previous 'config' setting '<State backend="Pulseaudio" ...'` and the
session file's '<EngineHints backend="Pulseaudio" ...'. But that is no
big deal after upgrading. Especially after the backend has been broken
for some users for a while.
2022-11-04 13:44:55 +01:00
Mads Kiilerich
ef5b29c6dd
PulseAudio: group operations and their verification together
Improves readability a bit. IMO.
2022-11-02 02:24:35 +01:00
Mads Kiilerich
b046ffe395
PulseAudio: drop idempotent dynamic cast 2022-11-02 02:24:35 +01:00
Mads Kiilerich
5bb7336c79
PulseAudio: consistent use of _buffer
For consistency and readability, avoid using high level getter in low
level code.
2022-11-02 02:24:35 +01:00
Mads Kiilerich
51501e5532
PulseAudio: don't set _run = false when stop() already did it 2022-11-02 02:24:35 +01:00
Mads Kiilerich
ba5ca2de05
PulseAudio: always log error reason in error handling
It adds some new strings to translate. These strings might be so rare
and technical that it is a bit pointless to translate them. But let's
stay consistent...
2022-11-02 02:24:35 +01:00
Mads Kiilerich
3fbbef3038
PulseAudio: fix "already active" message emitted when not active
Apparently just a missing fixup after copy-paste.
2022-11-02 02:24:34 +01:00
Mads Kiilerich
2666dfe900
PulseAudio: add missing return in error handling
Don't try to continue if the initial uncorking fails.
2022-11-02 02:24:34 +01:00
Mads Kiilerich
06b3d5ba33
PulseAudio: spin waiting for enough capacity to write
pa_threaded_mainloop_wait might wake up for several reasons. And there
is no point (but possibly harm) in moving on before we have verified
that PA actually is ready to receive our write without overflow.
2022-11-02 02:24:34 +01:00
Mads Kiilerich
27a2bf1f59
PulseAudio: clean up freewheeling transitions
ae3c8b19c6 and 03a17df68c reworked the transitions to and from
freewheeling. Some of it seems to have been experiments that tried
several things out, and generally it seems to have worked. It left some
commented out code. Clean that up.
2022-11-02 02:24:34 +01:00
Mads Kiilerich
04c24be2db
PulseAudio: don't drain the stream right after initial uncorking
The draining was introduced in ae3c8b19c6, apparently as an experiment
doing several changes. But the drain is outside the loop where
freewheeling changes, so the fix must have worked for other reasons.

There doesn't seem to be any benefit from draining at that point. The
stream is already empty. If not, we could have flushed it.

Draining right after uncorking will conceptualy create an intentional
underflow, even though it isn't reported as such. PipeWire seems to
(something like 6-12 months ago) have regressed in handling of that grey
area, causing that *underflow* to cause a request for too much data, and
thus causing constant *overflows* and unusable playback.

This change makes PulseAudio playback work for me again.
2022-11-02 02:24:34 +01:00
35612d26c6
Unify ::get_buffer, remove debug code 2022-06-18 22:54:09 +02:00
226dadbd19
Further reduce DSP load of debug builds
In all years of using these assert()s never triggered. Besides
there are valid_port() tests in other strategic locations that
are not periodically hit in realtime context.
2022-05-06 02:04:55 +02:00
Mads Kiilerich
8bb91099c5 wscript: drop configure statements already present in the top level wscript
Avoid repeated pointless configure messages like:
Checking for 'g++' (C++ compiler!)                   : /usr/lib64/ccache/g++
Checking for 'gcc' (C compiler)                      : /usr/lib64/ccache/gcc
2022-01-22 22:19:03 +01:00
a393f75694
Use shared port engine MIDI event compare operator 2021-11-30 19:41:39 +01:00
38a4bb6736
Fix prev commit (properly stop pulse) 2021-07-21 05:56:42 +02:00
03a17df68c
Pulseaudio: tweak freewheel recovery
Always cork stream before calling pa_stream_flush.
2021-07-21 05:03:54 +02:00
634d325e5d
Prevent deadlock when disconnecting
The backend holds `_port_callback_mutex` while disconnecting ports.
In some cases disconnecting a port can drop the last reference
resulting in a port-deletion from the connection handler.
This in turn will eventually aquire the `_port_callback_mutex`
and deadlock.

This is now circumvented by using atomic operations instead of
taking a lock to set the `_port_change_flag`.

The flag is also used to trigger a latency update in some cases,
atomic is preferable to taking a lock to set this flag.

--

Full bt: https://paste.debian.net/1184056/
Short:

#1  in pthread_mutex_lock ()
#2  in ARDOUR::PortEngineSharedImpl::port_connect_add_remove_callback()
#3  in ARDOUR::BackendPort::~BackendPort()
#4  in ARDOUR::DummyPort::~DummyPort()
#6  in ARDOUR::DummyAudioPort::~DummyAudioPort()
#7  in boost::checked_delete<ARDOUR::BackendPort>(ARDOUR::BackendPort*)
#12 in boost::shared_ptr<ARDOUR::ProtoPort>::reset()
#13 in ARDOUR::Port::drop()
#14 in ARDOUR::Port::~Port()
#15 in ARDOUR::AudioPort::~AudioPort()
#17 in ARDOUR::AudioEngine::add_pending_port_deletion(ARDOUR::Port*)
#20 in boost::detail::sp_counted_base::release()
#37 in ARDOUR::PortManager::connect_callback() at libs/ardour/port_manager.cc:788
#38 in ARDOUR::DummyAudioBackend::main_process_thread() at libs/backends/dummy/dummy_audiobackend.cc:1018
2021-02-04 21:06:20 +01:00
21e66216be
Separate user-set pretty-names from hardware I/O names
This allow to restore original engine port-names as set
by the backend. ALSA MIDI, CoreAudio, CoreMIDI and PortAudio
drivers can provide human readable physical port names for
some devices.
2021-01-18 03:18:20 +01:00
80e3c191e4
Pulseaudio: allow steam being suspended during export
When exporting long sessions with freewheeling, pulseaudio
may meanwhile suspend the corked audio device. The "FAIL_ON_SUSPEND"
option then prevents ardour to uncork it after export, and the
audio-backend is halted.
2020-11-22 21:41:47 +01:00
81862f8c30
Allow to move pulse stream #8467
This potentially breaks various assumptions (e.g. no resampling,
fixed buffersize) when the stream is moved to a different device.
Then again it's pulseaudio, which is unsuitable for pro-audio to
begin with.
2020-11-11 15:59:26 +01:00
cf0904f752
Handle vfork/exec failure
Don't call atexit, exit without cleanup.
2020-10-31 22:33:10 +01:00
a9bd7b2848
Remove unused compile-time option to not use vfork 2020-10-31 22:30:45 +01:00
a80064981e
NO-OP: Consolidate PortConnect code into shared parent class 2020-09-05 23:05:57 +02:00
92f54b3e98
Add API to query if systemic latency can be measured 2020-06-30 03:34:26 +02:00
09aa0a3d1a
Consolidate code using pthread_attr_setstacksize
This also adds some stack constraint to rt and fallback threads
that didn't have those before (ALSA MIDI for example)
2020-06-06 18:35:44 +02:00
ae3c8b19c6
Tweak PulseAudio re-initialization
This fixes an issue with pulse disconnecting after freewheeling,
and possibly also address #8193
2020-06-05 04:24:09 +02:00
3d166c7789
Consolidate stack-size and priority of rt-threads 2020-04-23 01:28:58 +02:00
78a66b7180 improved port cleanup as backend is destroyed 2020-04-07 23:26:51 -06:00
b9cb306e8b use shared_ptr to manage backend port lifetimes (Pulse,ALSA,Dummy,JACK)
JACK is not yet finished.

Changes also include minor reformatting and a spelling correction (latecies to latencies)
2020-04-07 13:23:49 -06:00
e5507f7072 use PortEngineSharedImpl with PulseAudio backend 2020-04-02 19:45:31 -06:00
a8ff35accb
Reset DSP load on backend re-start and after freewheeling 2020-03-30 16:58:55 +02:00
f866ed6305
Remove duplicate calls 2020-03-30 15:20:54 +02:00
45cf29b7c5
Use preferred pa_context_new_with_proplist API 2019-09-01 19:01:18 +02:00
47a62b2850
Update backend GPL boilerplate and (C) from git log 2019-08-03 15:53:16 +02:00
8a969b56c9
PA-backend: Flush buffer and wake up main thread at stop 2019-07-26 21:38:40 +02:00
b759fb883e
Launch pavucontrol as PA's control app 2019-07-26 04:43:56 +02:00