67f9f6fd75
Prepare for automation control master
...
Basic infrastructure to allow VCA automation and Trim automation:
look up events during automation playback.
2017-05-30 15:13:37 +02:00
628e60f8fd
NO-OP: whitespace
2017-05-29 23:45:16 +02:00
Daniel Sheeler
d67436af3b
duplicate routes start off unsoloed to avoid issues related to upstream / downstream buses
2017-05-29 15:42:27 -05:00
0a13106765
Allow export presets for 176.4KHz -- "Ardour6: music for bats"
2017-05-29 13:37:06 +02:00
1ef690da19
Use string concatenation and PBD::to_string in EventTypeMap::to_symbol()
...
Avoid using PBD::string_compose for serialization as correct behaviour depends
on the setting of the global C++ locale.
2017-05-26 10:50:08 +10:00
1f094027c5
Remove normalization of property names from libpbd xml code
...
It may have been OK to add this code temporarily at this low level, but as it
was introduced in 2008, this change is made with the assumption that any
Sessions that were affected have been re-saved since then with corrected
property names and that "normalization" is no longer necessary.
Timing results before changes:
XMLTest::testPerfMediumXMLDocumentTiming
Create : Count: 10 Min: 30375 Max: 48253 Total: 431727 Avg: 43172 (43 msecs)
Write : Count: 10 Min: 42553 Max: 49163 Total: 453353 Avg: 45335 (45 msecs)
Read : Count: 10 Min: 70307 Max: 75987 Total: 734923 Avg: 73492 (73 msecs)
XMLTest::testPerfLargeXMLDocumentTiming
Create : Count: 10 Min: 154486 Max: 307856 Total: 2678989 Avg: 267898 (267 msecs)
Write : Count: 10 Min: 304273 Max: 343274 Total: 3169158 Avg: 316915 (316 msecs)
Read : Count: 10 Min: 496920 Max: 541394 Total: 5260410 Avg: 526041 (526 msecs)
Timing results after changes:
XMLTest::testPerfMediumXMLDocumentTiming
Create : Count: 10 Min: 21437 Max: 39749 Total: 348622 Avg: 34862 (34 msecs)
Write : Count: 10 Min: 42320 Max: 49989 Total: 446135 Avg: 44613 (44 msecs)
Read : Count: 10 Min: 63252 Max: 68389 Total: 660841 Avg: 66084 (66 msecs)
XMLTest::testPerfLargeXMLDocumentTiming
Create : Count: 10 Min: 113458 Max: 263225 Total: 2215595 Avg: 221559 (221 msecs)
Write : Count: 10 Min: 305439 Max: 339986 Total: 3150697 Avg: 315069 (315 msecs)
Read : Count: 10 Min: 447560 Max: 488121 Total: 4698903 Avg: 469890 (469 msecs)
2017-05-26 08:48:04 +10:00
640d9d355f
Use correct property name in generic MIDI surface
...
Fixes restoring the feedback interval property, but as the mutator/setter
method doesn't seem to be used this change should have no affect.
2017-05-26 08:48:04 +10:00
bbb9a82e17
Use correct names when setting MidiTrack properties
...
These were changed in the XMLProperty ctor and they now match the names used in
MidiTrack::set_state()
2017-05-26 08:48:04 +10:00
244313f43f
Always create a deep copy of MIDI regions when copying playlists.
2017-05-25 14:10:14 +02:00
ae4b6316f1
Implement basic AU parameter-printing
...
(don't leave buf uninitialized)
2017-05-25 13:49:18 +02:00
63a71c597a
Include ParameterDescriptor in read-only control output
2017-05-25 13:49:18 +02:00
2c40b46ca9
OSC: fix return value for successful touch
2017-05-24 13:58:49 -07:00
1e95ccf07d
OSC: Added lpf and hpf controls for freq,enable and slope
2017-05-24 07:37:21 -07:00
f493b24e3e
OSC add feedback for extra comp and eq controls
2017-05-23 17:16:42 -07:00
2f1ad4d9a2
OSC - make /strip/list accept a parameter like everything else
2017-05-23 15:14:31 -07:00
f9b256044f
Remove old jack_utils.h header that was moved to the JACK backend
...
Also remove a related test that has not been part of the unit tests since the
move (years).
2017-05-23 14:32:15 +10:00
nick_m
39e7e11b5e
Sort tempo map after legacy sections have been assigned a pulse
2017-05-23 11:41:36 +10:00
nick_m
b886c1dcfa
Tempo sections with a BBT start XML node are never ramped
2017-05-23 09:54:30 +10:00
4d927c6bd4
Use braces in BasicUI::jump_by_bars()
2017-05-23 09:13:27 +10:00
7fe188ec92
Use braces in BasicUI::jump_by_seconds()
2017-05-23 09:13:27 +10:00
df185e575e
Use correct variable in BasicUI::jump_by_seconds
2017-05-23 09:13:27 +10:00
nick_m
1a31134d38
Fix failure to laod old tempo maps
...
I suspect this happened after an api change.
Now, just use the position pair instead of a whole new variable.
2017-05-23 05:30:39 +10:00
b3fb75fead
OSC: Further fixes so multiple controls can touch at once.
2017-05-20 10:17:31 -07:00
ab069b1372
OSC: fix c++98 mistake
2017-05-20 09:09:01 -07:00
9fc65b274e
Fix libhid compile with /recent/ libc (GNU_SOURCE)
...
- strtok_r
- strdup
- wcsdup
2017-05-20 12:39:49 +02:00
6926b7eb75
OSC: Catch case of surface sending fader move before touch
2017-05-19 15:48:36 -07:00
84e1a216bc
OSC: Add fake timeout based touch
2017-05-18 15:32:12 -07:00
d3738b087e
MCP: Fix issue with strip "select" buttons that stayed stuck on.
...
* Depending on individual strips to watch the selection property is prone to failure.
* Stripable_selection_changed() is called when a selection operation is completed.
2017-05-17 15:55:43 -05:00
60cc2823f3
MCP: map the well-known EQ knobs more explicitly, not heuristically.
2017-05-17 15:53:14 -05:00
f2aac0bcae
OSC: Add /strip/fader/touch
2017-05-15 19:38:41 -07:00
f3f1816899
remove unused variable
2017-05-15 19:38:41 -07:00
7e791981f0
OSC: added automation name feedback
2017-05-15 07:43:59 -07:00
fee4b7b3ea
OSC: combine two identical if() statements
2017-05-15 07:43:59 -07:00
b9bbea7174
It might not be obvious why... but 'ARDOUR::ControlProtocol::name()' needs to be a virtual function
...
Basically, libardour is calling functions from libardour_cp and vice versa. For example, libardour needs 'ARDOUR::ControlProtocol::name()' whereas ardour_cp needs 'ARDOUR::Route::soloed()' and various others. Ordinarily, this would require each library to get built before the other one! :-(
To get around this (in MSVC at least) one of the libraries must be forced to use late binding (e.g. by declaring its functions as 'virtual'). It looks like this is already being done for most of the other functions from 'ARDOUR::ControlProtocol', so let's do it for this function too...
2017-05-15 14:46:34 +01:00
0e4ddcf506
Fix out-of-bounds waveform image rendering.
...
With large sample-rates and high-zoom-level the minimal request-size
or at least 1/10sed can exceed the max image size supported by cairo.
e.g. @192kSPS; 100ms = 19200 samples.
* 1 sample/pixel, * 2 (left/right) = 38400px > 2^15px.
2017-05-14 20:37:58 +02:00
Nil Geisweiller
40f3efa3aa
Add note name parser to convert to midi note number
...
Supports i18n, is case and whitespace insensitive for more resilent parsing.
2017-05-14 18:13:07 +02:00
Edgar Aichinger
278d5bdab2
update german translation
2017-05-14 15:29:27 +02:00
3d26a29e8a
Sanitize "well-known" ctrl API
2017-05-14 00:17:11 +02:00
3e2004aa73
OSC: make /*/automation more generic so other controls can be easily added
2017-05-13 14:18:29 -07:00
82e6de3a3f
The #end should be #endif
2017-05-13 08:43:33 -07:00
6a28e02799
More tweaks to FP8 layout for 32C
2017-05-13 07:54:08 -05:00
b92f75481e
Fix copy+paste error for mb32c filter freq.
2017-05-13 07:27:08 -05:00
3efe5bde5f
Update FP8: new controllables, clarify 32C bell-shape labels
2017-05-13 02:02:54 +02:00
257cc06cfc
amend efc2660f, well-known stripable controls:
...
* consistent hpf/lpf controllables (actually hi/lo bell in 32C)
* HPT, LPF frequencies are exposed as EQ band
* don't expose filter ctrl for mixbuses/master
2017-05-13 02:02:54 +02:00
def9e110b7
Update Session::writable() during Session::save_as() when switching to copy
...
Loading a read only Session then making a copy with Save As and switch was
not allowing new Session to be saved as writable state was not updated.
Resolves : #7352
2017-05-13 09:02:02 +10:00
b23d7d9170
change ControlProtocolManager protocol mutex into a RW lock.
...
Probably not gaining much in terms of contention, but there's really no reason to be using a mutex
2017-05-12 20:09:40 +01:00
7021d02782
don't actually use a method from libardourcp inside libardour; use a PBD::Signal to avoid linker issues
2017-05-12 17:49:09 +01:00
32c3db5c59
OSC: GUI label change
2017-05-12 07:29:29 -07:00
774ebc42e3
OSC: Create new surface struct for ALL incoming messages
2017-05-12 07:29:29 -07:00
eb3f50e15c
change the way ControlProtocols (control surfaces) are notified and handle Stripable selection changes
...
The Editor continues to notify them, but via a direct call to ControlProtocolManager, not a signal.
The CP Manager calls the ControlProtocol static method to set up static data structures holding
selection info for all surfaces and then notifies each surface/protocol that selection has changed.
2017-05-12 14:51:39 +01:00
