f03f2e5c3f
use new record safe control in surface support
2016-05-31 15:30:45 -04:00
28afaebdc4
fix SNAFU in which Stripable::rec_enable_control() was incorrectly defined as ::recenable_control()
...
Make Mackie support code use the Stripable to access the rec-enable control while we're here
2016-05-31 15:30:45 -04:00
0d9433aef6
remove no-effect handling of route active-status change in Mackie Control code
2016-05-31 15:30:43 -04:00
186209c03c
fix crash in mackie code caused by assumption that all Stripables have meters
2016-05-31 15:30:43 -04:00
c34ad3a723
convert Mackie Control Surface support to use Stripable, not Route
2016-05-31 15:30:42 -04:00
e0ff70cf86
first vaguely working version using PresentationInfo
...
remote control ID and "order keys" have been removed.
2016-05-31 15:30:42 -04:00
5b5e64d860
remove Route::listening_via_monitor()
...
This is better tested with direct use of the solo_control and
Config->get_solo_controls_are_listen_controls()
2016-05-31 15:30:41 -04:00
653ae4acd6
universal change in the design of the way Route/Track controls are designed and used. The controls now own their own state, rather than proxy for state in their owners.
...
Massive changes all over the code to accomodate this. Many things are not finished. Consider this a backup safety commit
2016-05-31 15:30:40 -04:00
4b36593106
fix faderport and mackie to use route AutomationControls to be notified about solo/mute changes
2016-05-31 15:30:40 -04:00
aee283f056
use redesigned Route and VCA object architecture/API
2016-05-31 15:30:39 -04:00
672528baf4
fix shared_ptr<Route> management in Mackie support so that deleted routes are destroyed
2016-05-07 13:36:04 -04:00
10a11492dd
mackie: fix gain control display
2016-02-03 17:27:14 -05:00
eeff08aac4
mackie: use bus shortname in send subview.
...
Also slightly tighten route name display
2016-02-03 17:27:01 -05:00
7f82e7769f
zero more stuff out when leaving subview mode
2016-02-03 17:25:28 -05:00
dc4daa892d
Mackie Protocol: Show dB values for Mixbus "Send" levels.
...
No sense rewriting it now, but the correct way to approach
this stuff is to pass in the control, and use
the appropriate one of: interface, internal, or user values.
in this case, get_user would have returned dB for both Ardour and Mixbus sends.
2016-02-03 13:48:56 -06:00
8df1baa659
Fix for previous commit
2016-02-02 16:14:00 -06:00
ea08354c17
fix for knob scaling
2016-02-02 15:47:05 -06:00
a7775559c1
Mackie Control: remove Shift/select zeros fader.
2016-02-02 08:55:36 -08:00
9b1a150dd9
mackie: update fader+pot when changing flip status
2016-02-02 11:17:38 -05:00
a85b8ed842
mackie: fix display of input trim level trackview mode
2016-02-02 08:15:35 -05:00
4c13018656
mackie: fix display of send level/fader level in send subview
2016-02-02 08:08:14 -05:00
36b11098a2
mackie: substantial reworking of flip mode with large chunks of code no longer used.
...
Flip mode only works in Sends subview mode.
Display is incorrect when flipped - vpot is still updated by send level changes. TO BE FIXED.
2016-02-01 22:52:22 -05:00
cf29447ec3
mackie: add Phase control (for first channel only) in Track View subview mode.
...
Also removed a couple of methods no longer used, since trim and phase are only
visible in TrackView mode.
2016-02-01 15:15:57 -05:00
55967972b6
mackie: slightly less fragile/more readable code for compute new controllable values from vpot events
...
This is still not really right - it doesn't do the right thing, i think, for trim controls
2016-01-31 22:43:21 -05:00
c66d7e8cf9
mackie: consistent use of Shift to mean "InverseGroup"
2016-01-31 22:42:29 -05:00
de29ed02bc
mackie: display correct numerical send level
2016-01-31 22:41:46 -05:00
20d74585fd
mackie: implement trim, monitoring, solo iso and solo safe for trackview submode
2016-01-31 21:54:01 -05:00
9cfd76c026
mackie: make shift-click use InverseGroup semantics as intended, not NoGroup
2016-01-31 21:53:29 -05:00
23f457e81e
NOOP: comment fix
2016-01-31 21:52:46 -05:00
27b565d5cc
mackie: make vselect events and pot events handle toggle/enumeration controls correctly (or more correctly
2016-01-31 21:52:14 -05:00
69b4228176
mackie: partially working trackview submode.
...
More controls/pots to come
2016-01-31 13:20:18 -05:00
3631cc1532
mackie: remove Trim pot mode, and add skeleton for TrackView subview mode
2016-01-31 13:20:18 -05:00
39a61dba83
mixbus: vpot press in non-subview mode should toggle master bus send
2016-01-29 12:58:50 -05:00
c6ea3515d1
mackie: in Sends subview mode, the enable control for the send should be looked upin the subview route, not the strip's own route
2016-01-29 12:41:50 -05:00
0a2377e9b4
mackie: redesign display logic entirely
...
Strips now maintain a pair of pending display strings (upper and lower).
A periodic timeout writes the pending value to the actual hardware if it
differs from the current string. This new design makes it easy to put a
message on the display and then after some period of time, revert to
whatever was there before.
2016-01-29 12:27:46 -05:00
e862be7300
mackie: use Route::send_name() rather than Route::nth_send()
2016-01-28 23:05:28 -05:00
f1ed01b97f
mackie: fix display of send level value
2016-01-28 23:05:28 -05:00
e63c805fe2
mackie: clean up (some) interactions between subview mode and selection
...
Also, stop Plugin button from doing anything, since it has nothing to do yet
2016-01-27 19:00:27 -05:00
c61e5dbc18
remove debug output
2016-01-27 16:26:50 -05:00
66686a4e2a
mackie: semi-working Sends subview mode
2016-01-27 14:15:41 -05:00
9b2af90328
remove mackie send pot mode (subview mode for sends coming up)
2016-01-27 12:41:01 -05:00
9e5b7db89f
first compiling, mostly working version of group controls changes
2016-01-22 11:58:31 -05:00
5a55ac582d
mackie: shift-fader overrides group settings
2016-01-18 12:11:09 -05:00
c2bf0fc94e
remove shift-fader-touch as a way to reset gain to default
2016-01-18 12:11:09 -05:00
7cbf35a3d6
Mackie Control, Fix sends after monitor not showing.
2016-01-12 08:15:57 -08:00
9e3299f97d
change Controllable::set_value() API to include grouped control consideration.
...
This also removes Route::group_gain_control() and associated machinery.
Not yet tested with Mackie or other surfaces. More work to done to
start using the group capabilities, and also potentially to add
or derive more controls as RouteAutomationControls
2016-01-02 04:58:30 -05:00
85e12e8095
Mackie control: non-existent controls zero pot ring fix.
2015-12-19 11:50:13 -08:00
07e4377d7b
NoOp: removed spaces, replaced with tabs.
2015-12-16 20:41:50 -08:00
82f31fe624
Mackie Control: Re-enable view_mode display and make sure all text vanishes after timeout.
2015-12-16 14:38:21 -08:00
bff1fcbe48
mackie: restore access to trim and pan width control
...
Change from Evoral::Parameter to AutomationType caused this glitch
2015-12-16 11:05:40 -05:00
