97b1725023
OSC: Add well known controls for pan and compressor
2016-07-08 11:54:37 -07:00
295a7dfcf3
OSC: Add feedback for known pan controls and known compressor controls
2016-07-07 11:36:31 -07:00
d40cc6f6f9
OSC: Make sure selected strip is corrected when it's stripable vanishes
2016-07-06 19:28:41 -07:00
44fcbd988c
mackie: ensure that the strip where select was pressed ends up as the first_selected_stripable
2016-07-06 21:40:29 -04:00
77a8da9010
set ControlProtocol::_first_selected_stripable at the right time only
2016-07-06 20:58:33 -04:00
cf9706974c
a few post-rebase cleanups
2016-07-06 14:03:24 -04:00
2047ee527c
restore/extend/simplify ControlProtocol API to allow tracking of selection
2016-07-06 13:39:10 -04:00
eed3ea5047
remove a bunch of code that will no longer be used
2016-07-06 13:38:13 -04:00
860ffed6d1
OSC: Clear expand Lamp on strip observer destroy
2016-07-05 14:11:16 -07:00
fef79d46bb
OSC: Signal for editor mixer change. (Selected or not)
2016-07-04 20:07:38 -07:00
bc1f571954
OSC: /strip/select * should set new selected strip not toggle what is there.
2016-07-04 18:34:48 -07:00
291aec468f
use session stripable selection API
...
and remove old ControlProtocol signals to talk to GUI etc.
2016-07-04 12:45:53 -04:00
b27d9bb02a
OSC: select is global not per surface.
2016-07-04 08:27:16 -07:00
14c50b317c
operate directly on realtime controls, not via Session
2016-07-04 09:27:33 -04:00
a373e4cfc8
UI: Add editor_mixer route pointer to session so all UIs can know the same current_strip even in a selected group.
2016-07-03 18:22:09 -07:00
e6621c4405
OSC: select off by one bug, something must have changed by 1, fixed
2016-07-03 15:28:03 -07:00
661123c756
OSC: Account for some select edge cases
2016-07-01 21:21:08 -07:00
6ed7336384
OSC: make sure out of bank strip can not be converted to a stripable.
2016-07-01 18:31:13 -07:00
3491f22c04
OSC: Don't look for which stripable is selected until we actually need it, It may be wrong at application start.
2016-07-01 18:12:31 -07:00
55722a74fb
OSC: Change all time feedback to /position/<type>
2016-07-01 17:28:08 -07:00
7f712ddd4c
OSC: Select tweak.
2016-06-29 19:57:13 -07:00
95beda06d9
OSC: Reworked select to follow Gui selected strip regardless of it's inclusion in bank
2016-06-29 19:38:17 -07:00
f3dd9eef8b
OSC: master/monitor forced to sort at end
2016-06-22 14:50:13 -07:00
844bf70002
OSC: Fix math off by one, Check for all stripable controls because VCAs have less (crash fix)
2016-06-22 14:10:59 -07:00
64d7a82a52
fix gcc4 builds C++98
...
Flag is an enum -- not a class nor namespace
2016-06-22 16:18:07 +02:00
cad5ed4f21
OSC: Might help if I used the right variable, Really fix select.
2016-06-21 20:31:53 -07:00
74806a43c9
OSC: Fix out of range track. (crash)
2016-06-21 19:19:07 -07:00
daddf2179f
OSC: Add strip type selection.
2016-06-21 18:47:43 -07:00
557031ca11
Remove confusion over ambiguous symbols
...
libboost and libsigc++ both contain symbols called _1() / _2() etc. Forcing the use of namespace sigc causes us to use the ones from sigc++ when in fact, we want the ones from boost.
Hopefully this fix will work for all compilers.
2016-06-18 11:41:12 +01:00
6ca3c67046
Use Glib::usleep() for consistency
2016-06-18 11:34:14 +01:00
f4047b9a26
OSC: take care of track order changes too. Deal with mixer topology changes one time.
2016-06-16 19:41:39 -07:00
3754859f2f
OSC: Blank some more feedback values when select observer is destroyed.
2016-06-16 16:07:09 -07:00
dcf852aae4
OSC: Catch new strips, gone strips and redo banks and observers. Add more select feedback.
2016-06-13 11:57:15 -07:00
21bf61d559
MackieControl: in sends subview, if there are no sends for a vpot, drop the controllable for the vpot
2016-06-12 08:44:34 -04:00
beafe2be6e
fix MCP Cancel button "escape" action
2016-06-12 08:43:24 -04:00
a8d7b0fca3
redesign/reimplement selection knowledge in MackieControlProtocol object
...
strips listen to Stripable::presentation_info().PropertyChange, and forward selected status changes
to the MCP object
2016-06-12 08:19:16 -04:00
4717080aee
reduce verbosity of -D mackie in the presence of continued handshaking/keepalive messages.
2016-06-12 08:18:01 -04:00
3d9517c22f
OSC: Add send enable control.
2016-06-11 13:57:27 -07:00
63e6378713
OSC: added solo isolate and solo safe/lock.
2016-06-11 12:09:15 -07:00
1695de335d
OSC: Constrain master pan position as width requires.
2016-06-10 13:45:07 -07:00
b588308bed
OSC: force non-active controls to zero. Keep pan within range wide allows.
2016-06-10 13:05:58 -07:00
2d4358ddb5
Various changes to PresentationInfo and a small consolidation of sorters.
...
The semantics for sorting PresentationInfo are up to the caller, not the
PresentationInfo object, so operator<() was removed and callers specifically
invoke ::order() for sorting.
2016-06-10 13:57:18 -04:00
3eaa6c0389
remove certain ControlProtocol signals related to stripable selection
...
includes change to Mackie support so that strips listen for PropertyChange
on the stripables they represent, no global selection change used anymore.
2016-06-10 13:57:18 -04:00
f65713c426
OSC: Finished Select send levels
2016-06-09 18:33:00 -07:00
049a678ff9
OSC: change the word phase to polarity as per mailing list.
2016-06-09 15:24:43 -07:00
37aed5715b
OSC: add phase control
2016-06-09 12:07:57 -07:00
4905422a47
OSC: Added pan width to selected
2016-06-09 11:11:48 -07:00
199f20ff2c
namespace required
2016-06-09 13:24:35 -04:00
3e29a46603
OSC: select commands for pan and trim added, feedback for select sends. GUI_select feedback done.
2016-06-08 23:08:56 -07:00
f05ff9570e
fix faderport's use of action name
2016-06-07 19:25:33 -04:00
